Application of HRP-streptavidin bionanoparticles for potentiometric biotin determination.

Biotin is widely used in infant formula to prevent biotin deficiency of newborn babies and in beauty products as nutritional supplements for coenzymatic functions and having strong nails, shiny hair, and skin over the last few years. There is a need for the development of a fast, simple and reusable assay method to perform biotin determination at very low concentrations. Biotin determination has achieved with a prepared potentiometric biotin sensor that has a very wide concentration range (10-15M-10-7M) and a lower detection limit (0.3 10-15M) with a very good regression coefficient (0.9925). A quick response (7 min), good accuracy (recovery 100.4-103.7%), reproducible, reusable (10 times), and long-term stability (3 months) have been obtained using the prepared potentiometric sensor. The obtained results have proved that the prepared potentiometric sensor can be used for biotin determination in real samples.

RuBisCO nano enzyme for mimicking CO2 conversion system in plants.

In this study, carbon dioxide (CO2 ) capture and conversion systems based on the combination of biomimetic systems with nano enzymes have been developed. The effectiveness of the developed system has been investigated toward CO2 conversion. For this aim, nano ribulose bisphosphate carboxylase/oxygenase (RuBisCO) enzyme that plays role in the Calvin cycle in photosynthesis has been synthesized in 93 nm size according to AmiNoAcid (monomer) Decorated and Light Underpinning Conjugation Approach (ANADOLUCA) method. Enzymatic activity of synthesized nano RuBisCO enzyme has been spectrophotometrically determined by the formation of 3-phosphoglycerate (3-PGA) at the end of the reaction between CO2 and d-ribulose-1,5 biphosphate with the catalysis of RuBisCO enzyme at 340 nm. The effect of substrate concentration, pH, temperature, and Mg2+ ion concentration on the conversion reaction have investigated comparatively with nano and free RuBisCO enzyme. Besides this, the reusability feature of synthesized nano RuBisCO enzyme in conversion of CO2 reaction is indicated. When all data were evaluated, it has been seen that the nano RuBisCO enzyme is effective on the conversion of CO2 into 3-PGA and can be used for CO2 capture and conversion systems repeatedly without any deformation in its structure.

In situ and non-cytotoxic cross-linking strategy for 3D printable biomaterials.

3D bioprinting allows the production of patient-specific tissue constructs with desired structural characteristics such as high resolution, controlled swelling degree, and controlled degradation behavior by mostly using hydrogels. Crosslinking of hydrogels is an essential parameter in bioprinting applications, which is beneficial for tuning structural specifications. In this study, gelatin-alginate-whey protein isolate based hydrogels have been used for 3D printing structures in a layer-by-layer fashion. These structures were cross-linked by the Amino Acid (monomer) Decorated and Light Underpinning Conjugation Approach (ANADOLUCA) method, which is a unique, non-invasive photosensitive cross-linking technique for protein-based mixtures. In that aim, hydrogel properties (e.g., printability, biocompatibility, rheologic and mechanical behavior) and cross-linking properties (e.g., swelling and degradation behavior) were studied. Results were compared with UV and ionic cross-linking techniques, which are the abundantly used techniques in such studies. The results showed that the ANADOLUCA method can be used for in situ cross-linking under mild conditions for the printing of bio-inks, and the proposed method can be used as an alternative for UV-based and chemical cross-linking techniques.

A new potentiometric platform: Antibody cross-linked graphene oxide potentiometric immunosensor for clenbuterol determination.

An immunosensor is based on the signal measurement obtained upon the reaction of an antibody antigen complex. It plays a significant role in various fields such as environmental analysis, production monitoring, drug detection or screening, veterinary medicine, and animal food. In this study, an antibody crosslinked graphen oxide (GO)-based potentiometric sensor has been developed for fast, simple, and economical detection of clenbuterol. In this context, the photosensitive amino acid bound GO platform is synthesized and used for the preparation of electrode material. Then, polymeric structure is characterized by infrared spectroscopy, and the performance of immunonano platform prepared by potentiometric sensor is evaluated. The effect of pH, response time, selectivity, and sensitivity is investigated. Under the optimized conditions, a simple and rapid method for the determination of clenbuterol from milk sample is established by immuno-potentiometric sensor. The detection limit has found to be 0.87 × 10-9 mmol L-1 for this immuno-potentiometric sensor. This immuno-potentiometric sensor has optimum pH at 7.0, a wide linear response (1.0 × 10-2 to 1.0 × 10-9 mmol L-1 ), rapid response time (2 Min) and 36 weeks operational lifetime.

Proteinous Polymeric Shell Decorated Nanocrystals for the Recognition of Immunoglobulin M.

This study demonstrates the preparation of photosensitively orientated and crosslinked proteinous polymeric shell having quantum dot based nanocrystals through Amino acid Decorated and Light Underpinning Conjugation Approach (ANADOLUCA). ANADOLUCA is based on photo-electron transfer method and uses these decorated nanocrystals for specifically and effectively recognition and detection of Immunoglobulin M in the aqueous environment. The conjugation method effectively provides an orientation of affinity pairs on the surface of quantum dots nanocrystals. This photosensitive ruthenium-based amino acid monomer is a synthetic and inexpensive material for the preparation of bioconjugates. The nanocrystals give advantages for using a wide pH and temperature range. The construction and preparation method is applicable to silica materials, superparamagnetic particles, quantum dots, carbon nanotubes, Ag/Au nanoparticles, Au surfaces, and polymeric materials. This prepared proteinous polymeric shell decorated nanocrystals are of great potential in applications in life sciences and can be used in infection case studies or allergy symptoms.

Nano-hemoglobin film based sextet state biomemory device by cross-linked photosensitive hapten monomer.

In this study, a biomemory device, consisting of hemoglobin (Hb) cross-linked by MACys-Ru(bipyr)2-MACys) photosensitive monomer cross-linkers, which have memory effect through both Ru3+/2+ in hapten monomer and Fe3+/2+ in redox active center of Hb through multi-charge transfer mechanism, has been improved. Cyclic voltammetry (CV) has been used to determine the redox property of the Hb cross-linked MACys-Ru(bipyr)2-MACys) hapten. Three memory functions, writing, reading and erasing of the fabricated biomemory device, have been accomplished by chronoamperometry (CA) and open-circuit potential amperometry (OCPA). The reliability and repeatability of the biodevice consisting of the p(Hb-co-MACys-Ru(bipyr)2-MACys) sextet state bio-memory layer have been analysed. The Hb film based biodevice on gold electrodes has shown ≥ 2 months the retention time and switched until 106 times continuous cycling without degradation in efficiency. Other hand, the topography of p(Hb-co-MACys-Ru(bipyr)2-MACys) layer on the gold surface has investigated by scanning electron microscopy (SEM) and EDX data.

3D Micropatterned All-Flexible Microfluidic Platform for Microwave-Assisted Flow Organic Synthesis.

A large-area, all-flexible, microwaveable polydimethoxysilane microfluidic reactor was fabricated by using a 3D printing system. The sacrificial microchannels were printed on polydimethoxysilane substrates by a direct ink writing method using water-soluble Pluronic F-127 ink and then encapsulated between polydimethoxysilane layers. The structure of micron-sized channels was analyzed by optical and electron microscopy techniques. The fabricated flexible microfluidic reactors were utilized for the acetylation of different amines under microwave irradiation to obtain acetamides in shorter reaction times and good yields by flow organic synthesis.

Ferritin based bionanocages as novel biomemory device concept.

Ferritin is an iron cage having protein, capable of extracting metal ions in their cages and a consequence of the electron transfer of metal ions in their cage by reduction and oxidation processes, electrochemical information storage devices can be designed. In this work, ferritin based protein biomemory substrate has been synthesized by using Amino Acid (monomer) Decorated and Light Underpinning Conjugation Approach (ANADOLUCA) method, which utilizes photosensitive electron transfer based microemulsion co-polymerization as nanobead form of ferritin. Protein substrate contains metal ions such as silver and copper or metal ion pairs namely, silver-copper (Janus bionanocage) and co-polymeric shell of the photosensitive crosslinker protein. The redox behavior of bionanocages differentiates electrochemical "writing" and "erase" states depending on these metal ions (silver or copper) or metal ion pairs. The bionanocages based biomemory substrates have been immobilized using graphene modified glassy carbon electrodes and the memory functions of ferritin based bionanocages have been confirmed by chronoamperometry (CA) and open circuit potential amperometry (OCPA). The stability and durability of multi-state memory devices represent promising properties for future bioelectronic information technologies.

Multistate proteinous biomemory device based on redox controllable hapten cross-linker.

A multistate biomemory device consisting of cytochrome c (Cyt-c) photosensitively cross-linked by MACys-Ru(bipyr)2-MACys hapten molecules, which have memory effect through a charge transfer mechanism, has been developed. In this study, it has suggested a highly resolute surface-confined switch composed a signal-enhanced electro-active protein (Cyt-c) co-polymerized on the gold substrates that can be controlled by redox property through Ruthenium based cysteine monomer hapten, MACys-Ru(bipyr)2-MACys as an ANADOLUCA photosensitive cross-linker. The photosensitive cross-linking of the Cyt-c protein on the gold surface topography has been determined by the scanning electron microscopy (SEM). Two state memory functions, writing and erasing of the developed biomemory device, have been investigated by the chronoamperometry (CA) and open-circuit potential amperometry (OCPA). The polymeric proteinous memory device, p(MACys-Ru(bipyr)2-MACys-co-Cyt-c) layer, on the gold electrode is stable and repeatable up to with 104 times continuous cycle.

Molecular Imprinting Technology in Quartz Crystal Microbalance (QCM) Sensors.

Molecularly imprinted polymers (MIPs) as artificial antibodies have received considerable scientific attention in the past years in the field of (bio)sensors since they have unique features that distinguish them from natural antibodies such as robustness, multiple binding sites, low cost, facile preparation and high stability under extreme operation conditions (higher pH and temperature values, etc.). On the other hand, the Quartz Crystal Microbalance (QCM) is an analytical tool based on the measurement of small mass changes on the sensor surface. QCM sensors are practical and convenient monitoring tools because of their specificity, sensitivity, high accuracy, stability and reproducibility. QCM devices are highly suitable for converting the recognition process achieved using MIP-based memories into a sensor signal. Therefore, the combination of a QCM and MIPs as synthetic receptors enhances the sensitivity through MIP process-based multiplexed binding sites using size, 3D-shape and chemical function having molecular memories of the prepared sensor system toward the target compound to be detected. This review aims to highlight and summarize the recent progress and studies in the field of (bio)sensor systems based on QCMs combined with molecular imprinting technology.

Phosphoserine imprinted nanosensor for detection of Cancer Antigen 125.

Cancer antigen 125 (CA 125) is widely used as diagnostic biomarker for ovarian cancer. Change in the concentration level of CA 125 is associated with disease progression or regression. CA 125 posseses a phosphorylation site and protein backbone is phosphorylated on serine, before secretion. In this study, we have developed an imprinting method for CA 125 recognition and determination. In this method, methacryloyl antipyrine europium (III) [(MAAP)2-Eu(III)] and methacryloyl antipyrine terbium (III) [(MAAP)2-Tb(III)] have been used as new metal-chelating monomers via metal coordination-chelation interactions. Phosphoserine (PS) has been used as a template for the detection of CA 125. PS imprinted carbon nanotube (CNT) and Fe2O3 nanoparticle (SPN) have cavities that are selective for CA 125. The binding affinity of the PS imprinted CNT and SPN nanosensor has been investigated using Langmuir adsorption isotherms and affinity constants (Kaffinity) have found to be 1.85 105M-1 for PS and 13.5 10-3 mLU-1 and 7.73 10-3 mLU-1 for CA 125 (for CNT and SPN, respectively). Detection limit of PS imprinted CNT nanosensor for PS and CA 125 have been found to be 1.77 10-10M and 0.49 UmL-1, respectively. Human serum samples have been spiked with different concentrations of CA 125 (in pH 7.4 PBS) to investigate the feasibility of the nanosensors for clinical applications. Experimental results have been revealed that prepared nanosensors have been exhibited better sensivity, recovery and reproducibility.

Multiclonal plastic antibodies for selective aflatoxin extraction from food samples.

Herein, we focused on developing a new generation of monolithic columns for extracting aflatoxin from real food samples by combining the superior features of molecularly imprinted polymers and cryogels. To accomplish this, we designed multiclonal plastic antibodies through simultaneous imprinting of aflatoxin subtypes B1, B2, G1, and G2. We applied Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and spectrofluorimetry to characterize the materials, and conducted selectivity studies using ochratoxin A and aflatoxin M1 (a metabolite of aflatoxin B1), as well as other aflatoxins, under competitive conditions. We determined optimal aflatoxin extraction conditions in terms of concentration, flow rate, temperature, and embedded particle amount as up to 25ng/mL for each species, 0.43mL/min, 7.0, 30°C, and 200mg, respectively. These multiclonal plastic antibodies showed imprinting efficiencies against ochratoxin A and aflatoxin M1 of 1.84 and 26.39, respectively, even under competitive conditions. Finally, we tested reusability, repeatability, reproducibility, and robustness of columns throughout inter- and intra-column variation studies.

Potentiometric sensor fabrication having 2D sarcosine memories and analytical features.

In this study, a simple, rapid and sensitive method based on novel molecular imprinted polymeric sensor has been developed and validated for the determination of prostate cancer metabolite biomarker. The molecularly imprinted polymer (MIP) has been synthesized by emulsion polymerization, using sarcosine as template molecule, methacryloylamido histidine (MAH) as functional monomer and ethylene glycol dimethacrylate (EDMA) as cross-linking agent. The performance of the developed sarcosine sensor has been evaluated, and the results have indicated that a sensitive potentiometric sensor has been fabricated. The sarcosine sensor has showed high-selectivity, shorter response time (<2min), wider linear range (10(-2)-10(-6)mM), lower detection limit (1.35×10(-7)mM), and satisfactory long-term stability (>5.5months).

Polyethyleneimine assisted-two-step polymerization to develop surface imprinted cryogels for lysozyme purification.

Surface imprinting strategy is one of the promising approaches to synthesize plastic antibodies while overcoming the problems in the protein imprinting research. In this study, we focused our attentions on developing two-step polymerization to imprint on the bare surface employing polyethyleneimine (PEI) assisted-coordination of template molecules, lysozyme. For this aim, we firstly synthesized poly(2-hydroxyethyl methacrylate-glycidyl methacrylate), poly(HEMA-GMA) cryogels as a bare structure. Then, we immobilized PEI onto the cryogels through the addition reaction between GMA and PEI molecules. After that, we determined the amount of free amine (NH2) groups of PEI molecules, subsequently immobilized methacrylate functionalities onto the half of them and another half was used to chelate Cu(II) ions as a mediator between template, lysozyme and PEI groups. After the characterization of the materials developed by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and the micro-computed tomography (µCT), we optimized the lysozyme adsorption conditions from aqueous solution. Before performing lysozyme purification from chicken egg white, we evaluated the effects of pH, interaction time, the initial lysozyme concentration, temperature and ionic strength on the lysozyme adsorption. Moreover, the selectivity of surface imprinted cryogels was examined against cytochrome c and bovine serum albumin (BSA) as the competitors. Finally, the mathematical modeling, which was applied to describe the adsorption process, showed that the experimental data is very well-fitted to the Langmuir adsorption isotherm.

Design and Preparation of Nano-Lignin Peroxidase (NanoLiP) by Protein Block Copolymerization Approach.

This study describes the preparation of nanoprotein particles having lignin peroxidase (LiP) using a photosensitive microemulsion polymerization technique. The protein-based nano block polymer was synthesized by cross-linking of ligninase enzyme with ruthenium-based aminoacid monomers. This type polymerization process brought stability in different reaction conditions, reusability and functionality to the protein-based nano block polymer system when compared the traditional methods. After characterization of the prepared LiP copolymer nanoparticles, enzymatic activity studies of the nanoenzymes were carried out using tetramethylbenzidine (TMB) as the substrate. The parameters such as pH, temperature and initial enzyme concentration that affect the activity, were investigated by using prepared nanoLip particles and compared to free LiP. The reusability of the nano-LiP particles was also investigated and the obtained results showed that the nano-LiP particles exhibited admirable potential as a reusable catalyst.

Reusable nanocopy machine particles for the replication of DNA.

As one of the most important components copying DNA molecules in the PCR system, Taq DNA polymerase has a high processivity, however, lower persistence when compared to other polymerases. Studies for the enhancement of stability of Taq DNA polymerase is of great importance. The present study describes the integration of PCR application of cross-linked Taq DNA polymerase enzyme in a nanochamber using a ruthenium based MATyr-Ru-(bipyr)2)-MATyr monomer hapten prepared by photosensitive microemulsion polymerization technique. The conjugation and cross-linking have achieved using our previously invented Aminoacid (monomer) Decorated and Light Underpining Conjugation Approach (ANADOLUCA) method. Microemulsion polymerization media has prepared by dispersing PVA in deionized water. The nano enzyme could be easily prepared at room temperature, in daylight and under nitrogen atmosphere using ruthenium based photosensitive cross-linking agents. The nano copy machine particles (nano Taq DNA polymerase) are very stable against more acidic or more basic conditions, high temperatures and could be reusable in PCR analysis for many times without any deformation in their structures.

Self-oriented nanoparticles for site-selective immunoglobulin G recognition via epitope imprinting approach.

Molecular imprinting is a polymerization technique that provides synthetic analogs for template molecules. Molecularly imprinted polymers (MIPs) have gained much attention due to their unique properties such as selectivity and specificity for target molecules. In this study, we focused on the development of polymeric materials with molecular recognition ability, so molecular imprinting was combined with miniemulsion polymerization to synthesize self-orienting nanoparticles through the use of an epitope imprinting approach. Thus, L-lysine imprinted nanoparticles (LMIP) were synthesized via miniemulsion polymerization technique. Immunoglobulin G (IgG) was then bound to the cavities that specifically formed for L-lysine molecules that are typically found at the C-terminus of the Fc region of antibody molecules. The resulting nanoparticles makes it possible to minimize the nonspecific interaction between monomer and template molecules. In addition, the orientation of the entire IgG molecule was controlled, and random imprinting of the IgG was prevented. The optimum conditions were determined for IgG recognition using the imprinted nanoparticles. The selectivity of the nanoparticles against IgG molecules was also evaluated using albumin and hemoglobin as competitor molecules. In order to show the self-orientation capability of imprinted nanoparticles, human serum albumin (HSA) adsorption onto both the plain nanoparticles and immobilized nanoparticles by anti-human serum albumin antibody (anti-HSA antibody) was also carried out. Due to anti-HSA antibody immobilization on the imprinted nanoparticles, the adsorption capability of nanoparticles against HSA molecules vigorously enhanced. It is proved that the oriented immobilization of antibodies was appropriately succeeded.

Development of a highly sensitive MIP based-QCM nanosensor for selective determination of cholic acid level in body fluids.

Determination of cholic acid is very important and necessary in body fluids due to its both pharmaceutical and clinical significance. In this study, a quartz crystal microbalance (QCM) nanosensor, which is imprinted cholic acid, has been developed for the assignation of cholic acid. The cholic acid selective memories have been generated on QCM electrode surface by using molecularly imprinted polymer (MIP) based on methacryloylamidohistidine-copper (II) (MAH-Cu(II)) pre-organized monomer. The cholic acid imprinted nanosensor was characterized by atomic force microscopy (AFM) and then analytical performance of the cholic acid imprinted QCM nanosensor was studied. The detection limit was found to be 0.0065µM with linear range of 0.01-1,000 µM. Moreover, the high value of Langmuir constant (b) (7.3*10(5)) obtained by Langmuir graph showed that the cholic acid imprinted nanosensor had quite strong binding sites affinity. At the last step of this procedure, cholic acid levels in body fluids were determined by the prepared imprinted QCM nanosensor.

Bitargeting and ambushing nanotheranostics.

The main problem in cancer chemotherapy is the cytotoxic side effects of therapeutics on healthy tissues and cells. The targeted drug delivery and nanotechnology are intensively investigated area to find new ways to solve, at least to reduce, these problems. Hereby, we have reported a new method inspired from both conventional military strategies and biorecognition in the body. In this respect, we have produced two fluorescent nano-drug systems with bitargeting and biorecognition properties, recognizing cancer cells and each other. The multiplexed nanostructures were interacted with HL-60 cells to show their efficiency for bitargeting, ambushing, timed, and double-controlled cancer cell apoptosis.

Preparation of MIP-based QCM nanosensor for detection of caffeic acid.

In the present work, a new caffeic acid imprinted quartz crystal microbalance (QCM) nanosensor has been designed for selective assignation of caffeic acid in plant materials. Methacrylamidoantipyrine-iron(III) [MAAP-Fe(III)] as metal-chelating monomer has been used to prepare selective molecular imprinted polymer (MIP). MIP film for detection of caffeic acid has been developed on QCM electrode and selectivity experiments and analytical performance of caffeic acid imprinted QCM nanosensor has been studied. The caffeic acid imprinted QCM nanosensor has been characterized by AFM. After the characterization studies, imprinted and non-imprinted nanosensors was connected to QCM system for studies of connection of the target molecule, selectivity and the detection of amount of target molecule in real samples. The detection limit was found to be 7.8 nM. The value of Langmuir constant (b) (4.06 × 10(6)) that was acquired using Langmuir graph demonstrated that the affinity of binding sites was strong. Also, selectivity of prepared caffeic acid imprinted nanosensor was found as being high compared to chlorogenic acid. Finally, the caffeic acid levels in plant materials was determined by the prepared QCM nanosensor.