Chemical and Fatty Acid Compositions of Crude and Purified Extracts Obtained from Datura innoxia Seeds Extracted with Different Solvents.

Oils play a key role as raw materials in a variety of industries. The aim of this study was to evaluate the potential of Datura innoxia seed oil cultivated in Saudi Arabia for industrial purpose and to study the effects of hexane, chloroform, and isopropanol as extraction solvents on the compositions of the extracts. The results showed that the hexane and chloroform extracts were mainly neutral oils which were rich in linoleic (≈46%) and oleic (≈31%) acids. However, the isopropanol extract contained large amount of neutral oil and organic acids. Neutral oil contained mainly palmitic acid (40.2%) and some important and valuable epoxy (15.4%) and cyclopropane (13.2%) fatty acids. Analysis of the sterol and tocopherol levels of the crude and purified oil extracted revealed that they were significantly affected by the extraction solvent used.

High Reserve in δ-Tocopherol of Peganum harmala Seeds Oil and Antifungal Activity of Oil against Ten Plant Pathogenic Fungi.

This investigation included the chemical analysis of Peganum harmala (P. harmala) seed oil and its antifungal properties against 10 fungal species. Seed oils of six populations were analyzed using high performance liquid chromatography (HPLC) and gas chromatograph/mass spectrometry (GC-MS). The HPLC analysis indicated that P. harmala seed oil exhibited a very high level of tocopherol contents, with values in the range of 2385.66-2722.68 mg/100 g. The most abundant tocopherol isomer was δ-tocopherol (90.39%), followed by γ-tocopherol (8.08%) and α-tocopherol (1.14%). We discovered for the first time the presence of tocotrenols in P. harmala seed oils of the six populations studied. The GC-MS analyses revealed that linoleic acid was the main fatty acid (65.17%), followed by oleic acid (23.12%), palmitic acid (5.36%) and stearic acid (3.08%). We also studied the antifungal activity of seed oil of the Medenine (MD) population on ten fungal pathogens. The antifungal effects differed among pathogens and depended on oil concentrations. Seed oil of the MD population caused a significant decrease in mycelial growth of all fungi tested, with values ranging 31.50-82.11%, except for Alternaria sp., which showed no inhibition. The antifungal activity against the 10 selected fungi can be explained by the richness in tocols of the extracted oil and make P. harmala a promising crop for biological control. Furthermore, the importance of fatty acids and the wide geographic spread in Tunisia of this species make this crop a potential source of renewable energy.

Chemical Composition, Oxidative Stability, and Antioxidant Activity of Allium ampeloprasum L. (Wild Leek) Seed Oil.

Allium ampeloprasum L., commonly known as wild leek, is an edible vegetable that has been cultivated for centuries. However, no detailed studies have been undertaken to valorize A. ampeloprasum seed oil. This study aims to evaluate the physicochemical properties, chemical composition, and antioxidant activity of A. ampeloprasum seed oil. The seed oil content was found to be 18.20%. Gas chromatographymass spectrometry (GC-MS) showed that linoleic acid (71.65%) was the dominant acid, followed by oleic acid (14.11%) and palmitic acid (7.11%). A. ampeloprasum seed oil exhibited an oxidative stability of 5.22 h. Moreover, γ- and δ-tocotrienols were the major tocols present (79.56 and 52.08 mg/100 g oil, respectively). The total flavonoid content (16.64 µg CE /g oil) and total phenolic content (62.96 µg GAE /g oil) of the seed oil were also determined. The antioxidant capacity of the oil, as evaluated using the ABTS assay (136.30 µM TEAC/g oil), was found to be significant. These findings indicate that A. ampeloprasum seeds can be regarded as a new source of edible oil having health benefits and nutritional properties.

Optimization and blends study of heterogeneous acid catalyst-assisted esterification of palm oil industry by-product for biodiesel production.

The optimum conditions to produce palm fatty acid distillate (PFAD)-derived-methyl esters via esterification have been demonstrated with the aid of the response surface methodology (RSM) with central composite rotatable design in the presence of heterogeneous acid catalyst. The effect of four reaction variables, reaction time (30-110 min), reaction temperature (30-70°C), catalyst concentration (1-3 wt.%) and methanol : PFAD molar ratio (3 : 1-11 : 1), were investigated. The reaction time had the most influence on the yield response, while the interaction between the reaction time and the catalyst concentration, with an F-value of 95.61, contributed the most to the esterification reaction. The model had an R 2-value of 0.9855, suggesting a fit model, which gave a maximum yield of 95%. The fuel properties of produced PFAD methyl ester were appraised based on the acid value, iodine value, cloud and pour points, flash point, kinematic viscosity, density, ash and water contents and were compared with biodiesel EN 14214 and ASTM D-6751 standard limits. The PFAD methyl ester was further blended with petro-diesel from B0, B3, B5, B10, B20 and B100, on a volumetric basis. The blends were characterized by TGA, DTG and FTIR. With an acid value of 0.42 (mg KOH g-1), iodine value of 63 (g.I2/100 g), kinematic viscosity of 4.31 (mm2 s-1), the PFAD methyl ester has shown good fuel potential, as all of its fuel properties were within the permissible international standards for biodiesel.

Characterization of Ternary Blends of Vegetable Oils with Optimal ω-6/ω-3 Fatty Acid Ratios.

An optimal ratio of omega-6 to omega-3 (ω-6/ω-3) polyunsaturated fatty acids (PUFA) in the diet prevents the pathogenesis of many inflammatory diseases. This study aimed to synthesize and characterize ternary oil blends with optimal ω-6/ω-3 ratios using olive (OL), sunflower (SU), and cress (CR) oils. The oxidative stability, thermal profile, fatty acid (FA) and tocopherol compositions, and the physicochemical properties of the blends were used to determine their quality. Oil mixtures were prepared with 2, 3, 4, and 5 ω-6/ω-3 ratios. FA composition and tocopherol content were the most important factors affecting the oxidation and thermal stabilities of the oils. All oil mixtures showed good quality indices. Thus, synthetized oil blends with high oxidative stability, high antioxidant content, optimal ω-6/ω-3 ratios, and recommended FA compositions can influence human health. The composition of healthy oil blends with optimal ω-6/ω-3 ratios was expressed mathematically and depicted graphically in a ternary diagram.

Oxidation and Polymerization of Triacylglycerols: In-Depth Investigations towards the Impact of Heating Profiles.

The stability of refined, bleached, and deodorized palm olein (RBDPO) was studied under controlled heating conditions. RBDPO was heated continuously for 24 h at 160, 170, and 180 °C, with oil sampled at four hour intervals. Thermo-oxidative alterations were measured through various parameters, such as monomeric oxidized triacylglycerols (oxTAG), total polar compounds (TPC), polymerized triacylglycerols (PTG), oxidative stability, and fatty acid composition. After 24 h of heating, the TPC and triacylglycerol oligomers showed a linear increase with heating time at all heating temperatures. At the end of the heating study, more epoxy acids were formed than keto and hydroxy acids. Moreover, caprylic acid, which was not present in fresh oil, was formed in significant amounts. The increase in oxTAG was strongly correlated with the increase in the p-anisidine value and total oxidation value. The decreases in diacylglycerol and free fatty acids were strongly correlated with an increase in PTG.

Evaluation of quality parameters for fresh, used and recycled palm olein.

BACKGROUND: Recycled oil has emerged as a significant food safety issue and poses a major threat to public health. To date, very limited studies have been conducted aiming to detect the adulteration of used and recycled palm olein in refined, bleached and deodorized palm olein (RBDPO). In the present study, oil samples that underwent controlled heating and deep-frying studies were refined using the common oil refining procedure to simulate the production of recycled oil. Polymerized triacylglycerol (PTG), oxidized monomeric triacylglycerols (oxTAGs), such as epoxy, keto and hydroxy acids, and caprylic acid have been proposed as potential indicators for tracking the adulteration of recycled oil. RESULTS: For PTG, triacylglycerol oligomers and dimers showed a significant increase (P < 0.05) after the refining process. Although there was a significant reduction (P < 0.05) in the total oxTAGs concentration after refining, they were still present in the recycled palm olein, even though the used palm olein had undergone a complete oil refining process. The concentration of caprylic acid increased significantly (P < 0.05) in palm olein after undergoing various heat and deep-frying treatments and even showed a significant (P < 0.05) increase in recycled oil. CONCLUSION: The results obtained in the present study justify the suitability of the proposed quality parameters for use as quality indices with respect to controlling the adulteration of used and recycled palm olein in RBDPO for the protection of the health and safety of consumers. © 2019 Society of Chemical Industry.

Improvement of chitosan solubility and bactericidity by synthesis of N-benzimidazole-O-acetyl-chitosan and its electrodeposition.

Chitosan solubility and its antibacterial activity have been improved first of all with a chemical synthesis of N-benzimidazole-O-acetyl-chitosan in acetic medium and foremost through a potentiodynamic electrodeposition of this derivative. An association of one benzimidazole and three acetyl moieties per two units of the biopolymer chain was evidenced by FTIR and 1H NMR, pH-metric titration and TG analysis. Cyclic voltammetry study of the modified polymer in acetonitrile solution reveals its anodic oxidation at a platinum disk and a progressive growing of a thin film, through the cycling of potential. An enhancement of the solubility of the biopolymer as well as its antibacterial activity against Salmonella typhimurium, Escherichia coli, Staphylococcus aureus and Pseudomoenas aeruginosa bacteria have been observed with these chemical and after electrochemical modifications.

Chemical Composition of Date Palm (Phoenix dactylifera L.) Seed Oil from Six Saudi Arabian Cultivars.

This investigation aimed to evaluate the chemical composition and physicochemical properties of seed oils from 6 date palm (Phoenix. dactylifera L.) cultivars (Barhi, Khalas, Manifi, Rezeiz, Sulaj, and Sukkari) growing in Saudi Arabia and to compare them with conventional palm olein. The mean oil content of the seeds was about 7%. Oleic acid (48.67%) was the main fatty acid, followed by lauric acid (17.26%), stearic acid (10.74%), palmitic acid (9.88%), and linolenic acid (8.13%). The mean value for free fatty acids content was 0.5%. The P. dactylifera seed oil also exhibited a mean tocol content of 70.75 mg/100 g. α-Tocotrienol was the most abundant isomer (30.19%), followed by γ-tocopherol (23.61%), γ-tocotrienol (19.07%), and α-tocopherol (17.52%). The oils showed high thermal and oxidative stabilities. The findings indicate that date seed oil has the potential to be used in the food industry as an abundant alternative to palm olein. PRACTICAL APPLICATION: This study showed that date seed had great nutritional value due to which it can be used for food applications especially as frying or cooking oil. In addition, date oil has also potential to be used in cosmetic and pharmaceutical practices as well. The extraction of oil from Phoenix dactylifera seed on large scale can create positive socioeconomic benefits especially for rural communities and could also assist to resolve the environmental issues generated by excess date production in large scale date-producing countries such as Saudi Arabia.

Biodiesel Production from Citrillus colocynthis Oil Using Enzymatic Based Catalytic Reaction and Characterization Studies.

BACKGROUND: Biodiesel is a green fuel consisting of long chain fatty acid monoalkyl esters, which can be blended with diesel or used alone which is usually produced from vegetable oils/fats by either lipasecatalyzed transesterification. In this investigation, an enzyme (Novozym 435) catalyzed process was optimized to prepare methyl esters from crude Citrullus colocynthis oil (CCO) by transesterification of CCO with methanol. However, as per our knowledge, lipase-catalyzed transesterification have not been used for biodiesel production from Citrullus colocynthis. OBJECTIVE: The purpose of this work was to transesterify the CCO in the presence of Candida antarctica lipase as catalyst and methanol. Additionally, the physicochemical parameters/fuel properties of the Citrullus colocynthis methyl ester (CCME) were assessed and compared. METHODS: Lipase-catalyzed reactions were carried out in three necked flask (50 mL) attached with reflux condenser and thermometer, immersed in oil bath at constant stirring speed (400 rpm). The reaction mixture was consisted of CCO and varying the calculated amount of methanol, tert-butyl alcohol, and Novozym 435. The experimental parameters reaction time, methanol/oil molar ratio, reaction temperature, tert-butanol content, Novozym 435 content and water content were optimized for the transesterification reaction. The CCME yield was measured using gas chromatograph. The fuel properties of the produced CCME were determined as per American Society for Testing and Materials (ASTM) and European (EN) biodiesel standard methods. RESULTS: In this study, an enzymatic catalyst was employed to synthesize the CCME from CCO via transesterification. Several variables affecting the CCME yield were optimized as lipase quantity (4%), water content (0.5%), methanol/oil molar ratio (5:1), reaction temperature (43 °C), reaction medium composition (80% tertbutanol/ oil), and reaction time (3.7 h). A CCME yield of 97.8% was achieved using enzyme catalyzed transesterification of CCO under optimal conditions. The significant biodiesel fuel properties of CCME, i.e. cloud point (0.70 °C); cetane number (49.07); kinematic viscosity (2.27 mm2/s); flash point (143 °C); sulfur content (2 ppm) density (880 kg/m3) and acid value (0.076 mg KOH/g) were appraised. CCME also exhibited long-term storage stability (4.80 h) and all the biodiesel fuel properties were within the range of standards (ASTM D6751 and EN 14214). CONCLUSION: The lipase-catalyzed transesterification produced better conversion than the base-catalyzed reaction. The fuel properties of CCME were within the limits of the ASTM D6751 and EN14214 standards. Furthermore, CCME showed good oxidative stability and a long shelf life due its high natural antioxidant content. CCME showed better fuel properties and long-term storage stability due to which it can be used as a potential alternative fuel.

Physico-chemical properties of Tecoma stans Linn. seed oil: a new crop for vegetable oil.

Tecoma stans Linn. is known to have various medicinal and therapeutic properties. However, to our knowledge, no information is available regarding their seed oils. In this study, the fatty acid (FA) compositions, physico-chemical properties and antioxidant capacities of T. stans seed oils (TSOs) were investigated. The oil content of the seeds was 15%. The FAs of the TSOs were analysed by GC-MS. α-Linolenic (45.47%), oleic (23.56%), linoleic (11.48%), palmitic (6.09%) and stearic (4.12%) acids were the major detected FAs. γ-Linolenic acid and stearidonic acid, unusually FAs, were also present (1.04% and 6.65%, respectively). The total tocol content in the TSOs was found to be 266.06 mg/100 g. The main component was γ-tocopherol (78.93%). The total phenolic content (168.69 mg GAE/100 g oil) and total flavonoid content (5.54 mg CE/g oil) were also determined in the TSOs.

Effects of homogenization process parameters on physicochemical properties of astaxanthin nanodispersions prepared using a solvent-diffusion technique.

Nanodispersion systems allow incorporation of lipophilic bioactives, such as astaxanthin (a fat soluble carotenoid) into aqueous systems, which can improve their solubility, bioavailability, and stability, and widen their uses in water-based pharmaceutical and food products. In this study, response surface methodology was used to investigate the influences of homogenization time (0.5-20 minutes) and speed (1,000-9,000 rpm) in the formation of astaxanthin nanodispersions via the solvent-diffusion process. The product was characterized for particle size and astaxanthin concentration using laser diffraction particle size analysis and high performance liquid chromatography, respectively. Relatively high determination coefficients (ranging from 0.896 to 0.969) were obtained for all suggested polynomial regression models. The overall optimal homogenization conditions were determined by multiple response optimization analysis to be 6,000 rpm for 7 minutes. In vitro cellular uptake of astaxanthin from the suggested individual and multiple optimized astaxanthin nanodispersions was also evaluated. The cellular uptake of astaxanthin was found to be considerably increased (by more than five times) as it became incorporated into optimum nanodispersion systems. The lack of a significant difference between predicted and experimental values confirms the suitability of the regression equations connecting the response variables studied to the independent parameters.

Preparation of astaxanthin nanodispersions using gelatin-based stabilizer systems.

The incorporation of lipophilic nutrients, such as astaxanthin (a fat soluble carotenoid) in nanodispersion systems can either increase the water solubility, stability and bioavailability or widen their applications in aqueous food and pharmaceutical formulations. In this research, gelatin and its combinations with sucrose oleate as a small molecular emulsifier, sodium caseinate (SC) as a protein and gum Arabic as a polysaccharide were used as stabilizer systems in the formation of astaxanthin nanodispersions via an emulsification-evaporation process. The results indicated that the addition of SC to gelatin in the stabilizer system could increase the chemical stability of astaxanthin nanodispersions significantly, while using a mixture of gelatin and sucrose oleate as a stabilizer led to production of nanodispersions with the smallest particle size (121.4±8.6 nm). It was also shown that a combination of gelatin and gum Arabic could produce optimal astaxanthin nanodispersions in terms of physical stability (minimum polydispersity index (PDI) and maximum zeta-potential). This study demonstrated that the mixture of surface active compounds showed higher emulsifying and stabilizing functionality compared to using them individually in the preparation of astaxanthin nanodispersions.

Characterization of white Mahlab (Prunus mahaleb L.) seed oil: a rich source of α-eleostearic acid.

UNLABELLED: Seed oils with high polyunsaturated fatty acid content are used in various industries including the food and pharmaceutical industries. White mahlab (Prunus mahaleb L.) seed was found to contain 31% oil. The oil was highly polyunsaturated and abundant in α-eleostearic (38.32%), oleic (31.29%), and linoleic (22.96%) acids, which together comprised 93.91% of the total fatty acids. The α-eleostearic acid was identified and characterized based on (1)H-NMR, UV, and FTIR spectroscopy. The oil was characterized by a relatively high quantity of tocopherols with γ-tocopherol as the major tocopherol isomer. The physicochemical characteristics of the white mahlab seed and seed oil were also determined. The thermogravimetric analysis indicated that the oil was thermally stable up to 350 °C and began to decompose at 520 °C. This study demonstrated that these seeds may be reused and their oil incorporated into other food products, a beneficial practice considering that the compounds present in the seeds and oils have positive effects on human health. PRACTICAL APPLICATION: In this study, mahlab seed oil was found to have potentials to become a new edible oil source as it contained a high level of polyunsaturated fatty acids especially, α-eleostearic acid, which is a conjugated fatty acid rarely found in vegetable oils and has a beneficial effects on human health.

Chamaerops humilis L. var. argentea André date palm seed oil: a potential dietetic plant product.

Chamaerops humilis L. var. argentea André (C. humilis) date palm seeds are an underutilized source of vegetable oil, and no studies describing their physicochemical characteristics to indicate the potential uses of this seed or seed oil have been reported. The oil content of the seeds is about 10%, mainly composed of oleic acid (38.71%), lauric acid (21.27%), linoleic acid (15.15%), palmitic acid (9.96%), and stearic acid (7.17%). The tocol (tocopherols and tocotrienols) content is 74 mg/100 g, with δ-tocotrienol as the major contributor (31.91%), followed by α-tocotrienol (29.37%), γ-tocopherol (20.16%), and γ-tocotrienol (11.86%). Furthermore, this oil shows high thermal stability. The differential scanning calorimetery curves revealed that the melting and crystallization points are 9.33 °C and -15.23 °C, respectively.

Characterization of Hachi (Camelus dromedarius) fat extracted from the hump.

In this work, the characteristics of fat from the hump of young camels (Hachi) were evaluated. The physicochemical properties of the fat were as follows: melting point, 45°C; saponification value, 202.3 mg KOH/g oil; refractive index (60°C), 1.468; unsaponifiable matter, 1.37%; free fatty acids (as the percentage of oleic acid), 0.96%; and peroxide value, 3.37 mequiv. O2/kg oil. High-resolution (1)H nuclear magnetic resonance ((1)H NMR) was used for the direct determination of the iodine value of Hachi fat (62.74 g/100 g oil). The Hachi fat was composed primarily of oleic acid (33.35%), followed by palmitic acid (26.16%), stearic acid (10.07%), palmitelaidic acid (9.56%) and myristic acid (8.83%). The thermal properties were assessed by thermogravimetry (TG) and derivative thermogravimetry (DTG). The results of the present analytical study showed that Hachi fat could be used in food products and as an important source of biological materials.

Evaluation and characterisation of Citrullus colocynthis (L.) Schrad seed oil: Comparison with Helianthus annuus (sunflower) seed oil.

The physicochemical properties, fatty acid, tocopherol, thermal properties, (1)H NMR, FTIR and profiles of non-conventional oil extracted from Citrullus colocynthis (L.) Schrad seeds were evaluated and compared with conventional sunflower seed oil. In addition, the antioxidant properties of C. colocynthis seed oil were also evaluated. The oil content of the C. colocynthis seeds was 23.16%. The main fatty acids in the oil were linoleic acid (66.73%) followed by oleic acid (14.78%), palmitic acid (9.74%), and stearic acid (7.37%). The tocopherol content was 121.85 mg/100g with γ-tocopherol as the major one (95.49%). The thermogravimetric analysis showed that the oil was thermally stable up to 286.57°C, and then began to decompose in four stages namely at 377.4°C, 408.4°C, 434.9°C and 559.2°C. The present study showed that this non-conventional C. colocynthis seed oil can be used for food and non-food applications to supplement or replace some of the conventional oils.

Garden cress (Lepidium sativum Linn.) seed oil as a potential feedstock for biodiesel production.

Lepidium sativum L. (garden cress) is a fast growing annual herb, native to Egypt and west Asia but widely cultivated in temperate climates throughout the world. L. sativum seed oil (LSO) extracted from plants grown in Tunisia was analyzed to determine whether it has potential as a raw material for biodiesel production. The oil content of the seeds was 26.77%, mainly composed of polyunsaturated (42.23%) and monounsaturated (39.62%) fatty acids. Methyl esters (LSOMEs) were prepared by base-catalyzed transesterification with a conversion rate of 96.8%. The kinematic viscosity (1.92 mm(2)/s), cetane number (49.23), gross heat value (40.45), and other fuel properties were within the limits for biodiesel specified by the ASTM (American Standard for Testing and Materials). This study showed that LSOMEs have the potential to supplement petroleum-based diesel.