Divalent Metal Ion Depletion from Wastewater by RVC Cathodes: A Critical Review.

In this paper, a critical review of results obtained using a reticulated vitreous carbon (RVC) three-dimensional cathode for the electrochemical depletion of various divalent ions, such as Cu+2, Cd+2, Pb+2, Zn+2, Ni+2, and Co+2, often present in wastewater, has been carried out. By analyzing the kinetics and fluid dynamics of the process found in literature, a general dimensionless equation, Sh = f(Re), has been determined, describing a general trend for all the analyzed systems regardless of the geometry, dimensions, and starting conditions. Thus, a map in the log(Sh) vs. log(Re) plane has been reported by characterizing the whole ion electrochemical depletion process and highlighting the existence of a good correlation among all the results. Moreover, because in recent years, the interest in using this three-dimensional cathode material seems to have slowed, the intent is to revive it as a useful tool for metal recovery, recycling processes, and water treatments.

Resorc[4]arene Modifiers for Supramolecular Site-Directed Immobilization of Antibodies on Multi-Walled Carbon Nanotubes.

One of the main problems in developing immunosensors featuring carbon nanotubes (CNTs) is immobilizing antibodies (Abs) onto the CNT surface to afford selective binding to target antigens (Ags). In this work, we developed a practical supramolecular Ab conjugation strategy based on resorc[4]arene modifiers. To improve the Ab orientation on the CNTs surface and optimizing the Ab/Ag interaction, we exploited the host-guest approach by synthesizing two newly resorc[4]arene linkers R1 and R2 via well-established procedures. The upper rim was decorated with eight methoxyl groups to promote selective recognition of the fragment crystallizable (Fc ) region of the Ab. Moreover, the lower rim was functionalized with 3-bromopropyloxy or 3-azidopropiloxy substituents to bind the macrocycles on the multi-walled carbon nanotubes (MWCNTs) surface. Accordingly, several chemical modifications of MWCNTs were evaluated. After the morphological and electrochemical characterization of nanomaterials, the resorc[4]arene-modified MWCNTs were deposited onto a glassy carbon electrode surface to evaluate their potential applicability for label-free immunosensor development. The most promising system showed an improved electrode active area (AEL ) of almost 20 % and a site-oriented immobilization of the SARS-CoV-2 spike protein S1 antibody (Ab-SPS1). The developed immunosensor revealed a good sensitivity (23.64 µA mL ng-1 cm-2 ) towards the SPS1 antigen and a limit of detection (LOD) of 1.01 ng mL-1 .

Organoselenium compounds as functionalizing agents for gold nanoparticles in cancer therapy.

Gold nanoparticles (AuNPs) modified with four organoselenium compounds, i.e., 4-selenocyanatoaniline (compound 1), 4,4'-diselanediyldianiline (compound 2), N-(4-selenocyanatophenyl)cinnamamide (compound 3), and N-(3-selenocyanatopropyl)cinnamamide (compound 4), were synthesized following two different approaches: direct conjugation and non-covalent immobilization onto hydrophilic and non-cytotoxic AuNPs functionalized with 3-mercapto-1-propanesulfonate (3MPS). Both free compounds and AuNPs-based systems were characterized via UV-Vis, FTIR NMR, mass spectrometry, and SR-XPS to assess their optical and structural properties. Size and colloidal stability were evaluated by DLS and ζ-potential measurements, whereas morphology at solid-state was evaluated by atomic force (AFM) and scanning electron (FESEM) microscopies. AuNPs synthesized through chemical reduction method in presence of Se-based compounds as functionalizing agents allowed the formation of aggregated NPs with little to no solubility in aqueous media. To improve their hydrophilicity and stability mixed AuNPs-3MPS-1 were synthesized. Besides, Se-loaded AuNPs-3MPS revealed to be the most suitable systems for biological studies in terms of size and colloidal stability. Selenium derivatives and AuNPs were tested in vitro via MTT assay against PC-3 (prostatic adenocarcinoma) and HCT-116 (colorectal carcinoma) cell lines. Compared to free compounds, direct functionalization onto AuNPs with formation of Au-Se covalent bond led to non-cytotoxic systems in the concentration range explored (0-100 µg/mL), whereas immobilization on AuNPs-3MPS improved the cytotoxicity of compounds 1, 3, and 4. Selective anticancer response against HCT-116 cells was obtained by AuNPs-3MPS-1. These results demonstrated that AuNPs can be used as a platform to tune the in vitro biological activity of organoselenium compounds.

Study of the interaction mechanism between hydrophilic thiol capped gold nanoparticles and melamine in aqueous medium.

In the last years, intense efforts have been made in order to obtain colloidal-based systems capable of pointing out the presence of melamine in food samples. In this work, we reported about the recognition of melamine in aqueous solution, using gold nanoparticles stabilized with 3-mercapto-1-propanesulfonate (AuNPs-3MPS), with the aim of deepening how the recognition process works. AuNPs were synthesized using a wet chemical reduction method. The synthesized AuNPs-3MPS probe was fully characterized, before and after the recognition process, by both physicochemical (UV-vis, FT-IR, 1H-NMR, DLS and ζ-potential) and morphostructural techniques (AFM, HR-TEM). The chemical and electronic structure was also investigated by SR-XPS. The sensing method is based on the melamine-induced aggregation of AuNPs; the presence of melamine was successfully detected in the range of 2.5-500 ppm. The results achieved also demonstrate that negatively charged AuNPs-3MPS are potentially useful for determining melamine contents in aqueous solution. SR-XPS measurements allowed to understand interaction mechanism between the probe and the analyte. The presence of sulfonate groups allows a mutual interaction mediated by electrostatic bonds between nanoparticles surface thiols and positively charged amino groups of melamine molecules.

Insights about the interaction of methotrexate loaded hydrophilic gold nanoparticles: Spectroscopic, morphological and structural characterizations.

Gold nanoparticles (AuNPs) are promising carriers in the field of nanomedicine and represent a very intriguing approach in drug delivery applications, due to their small size and enhanced properties. This work aims to highlight the interaction between functionalized AuNPs and the immune-system suppressant drug Methotrexate (MTX) at molecular level. Small and monodisperse (<2RH>5 ± 1 nm) gold nanoparticles were prepared by a simple chemical route using hydrophilic thiol 3-mercapto-1-propanesulfonate (3MPS) as a functionalizing/capping agent and act as a platform for post-synthesis conjugation of MTX via non-covalent interaction. The AuNPs-3MPS@MTX bioconjugate and the AuNPs alone were characterized to investigate their optical, chemical, and morphological properties. Moreover, NMR, AFM, SAXS, HR-TEM and SR-XPS data confirmed the spherical shape of AuNPs and allowed to determine the mechanisms behind such drug-nanoparticle physicochemical interactions. These analyses define the overall structure of drug-loaded AuNPs-3MPS and drug location on the colloidal nanoparticles surface. Based on the experimental data, it is notable to assert that MTX was successfully loaded on the negatively charged nanoparticles surface via electrostatic interactions. The physicochemical behavior leads to the formation of large clusters with close packed arrangement of AuNPs-3MPS@MTX. This self-assembling property is of importance for delivery purpose affecting the drug-loaded nanoparticle size, functionality, and morphology. Knowledge of how these systems behave will aid in increasing drug efficacy and in understanding the pharmacodynamics and pharmacokinetic properties, opening to new physicochemical insight for therapy and drug delivery systems.

Noble metal nanoparticle-based networks as a new platform for lipase immobilization.

Enzyme immobilization on nanocarriers is nowadays considered a useful tool for improving activity and maintaining biocatalysts stability while facilitating their recovery and reuse. In this work we prepared Au and Ag based nanoparticles (AuNPs or AgNPs) stabilized with two different ligands, the organometallic dinuclear complex trans,trans-[dithiodibis(tributylphosphine)diplatinum(II)-4,4'-diethynylbiphenyl] (Pt-DEBP) and the organic dithiol 4,4'-dithiol-biphenyl (BI), able to link the NPs in 3D networks. We investigated the ability of these nanocarriers to interact with a model lipolytic enzyme from Pseudomonas fluorescens and maintain its activity, both in aqueous as well as in organic media. In particular, our results highlighted that the nature of the metal plays a role in enzyme adsorption, while enzyme activity is mostly influenced by the chemistry of the organic spacer. The obtained bioconjugate, between lipase and the most promising carrier, AgNPs-Pt-DEBP, was stable in a wide temperature range (25-55 °C) and it showed good activity retention both in aqueous (50%) as well as in organic media (75%), compared to the lipase used in soluble form.

Extending substrate sensing capabilities of zinc tris(2-pyridylmethyl)amine-based stereodynamic probe.

Tripodal metal complexes have been widely used for catalysis and more recently also for molecular recognition applications. Their ability in recognition and signal amplification of chiral substrates is because of the setup of the ligand around the metal in a propeller shape. Within this subject, we have recently reported tris(2-pyridylmethyl)amine- and triphenolamine-based complexes for the determination of the enantiomeric excess of various substrates. Herein, we show the versatility of the zinc tris(2-pyridylmethyl)amine-based stereodynamic probe by performing a detailed study of the imine formation process, by the extension of the sensing capabilities to other chiral compounds. A principal component analysis study of the system together with TD-DFT studies highlights the molecular origin of the observed chiroptical properties.

Diasteroselective multi-component assemblies from dynamic covalent imine condensation and metal-coordination chemistry: mechanism and narcissistic stereochemistry self-sorting.

Self-assembly of a modified tris(2-pyridylmethyl)amine TPMA ligand, zinc(ii) or cobalt(ii) ions, and amino acids have been used effectively as stereo dynamic optical probes for the determination of the enantiomeric excess of free amino acids either using Electronic or Vibrational Circular Dichroism (CD and VCD). Herein, we report the mechanistic and stereochemical study of the self-assembly process which reveals a complex equilibrium in solution where even small variations in the experimental conditions can profoundly affect the final products of the reaction. In particular, variation on the metal stoichiometry switch give rises to an entirely enantio narcissistic self-assembly of the structure.

Nanocomposite Based on Functionalized Gold Nanoparticles and Sulfonated Poly(ether ether ketone) Membranes: Synthesis and Characterization.

Gold nanoparticles, capped by 3-mercapto propane sulfonate (Au-3MPS), were synthesized inside a swollen sulfonated poly(ether ether ketone) membrane (sPEEK). The formation of the Au-3MPS nanoparticles in the swollen sPEEK membrane was observed by spectroscopic and microscopic techniques. The nanocomposite containing the gold nanoparticles grown in the sPEEK membrane, showed the plasmon resonance λmax at about 520 nm, which remained stable over a testing period of three months. The size distribution of the nanoparticles was assessed, and the sPEEK membrane roughness, both before and after the synthesis of nanoparticles, was studied by AFM. The XPS measurements confirm Au-3MPS formation in the sPEEK membrane. Moreover, AFM experiments recorded in fluid allowed the production of images of the Au-3MPS@sPEEK composite in water at different pH levels, achieving a better understanding of the membrane behavior in a water environment; the dynamic hydration process of the Au-3MPS@sPEEK membrane was investigated. These preliminary results suggest that the newly developed nanocomposite membranes could be promising materials for fuel cell applications.

Triggering Assembly and Disassembly of a Supramolecular Cage.

A novel supramolecular cage built from the self-assembly of tris(2-pyridylmethyl)amine zinc complexes through imine condensation chemistry is reported. The cage recognition properties over a variety of structurally related guests, together with the kinetic study of the template assembly and disassembly, have been investigated in detail. This knowledge has been used to selectively modulate the rate of both assembly and disassembly processes. In particular, a novel disassembly method induced by strain release of the guest has been developed.

Synthesis, Characterization, and Electrochemical Behavior of LiMnxFe(1-x)PO4 Composites Obtained from Phenylphosphonate-Based Organic-Inorganic Hybrids.

The synthesis of organic-inorganic hybrid compounds based on phenylphosphonate and their use as precursors to form LiMnxFe(1-x)PO4 composites containing carbonaceous substances with sub-micrometric morphology are presented. The experimental procedure includes the preliminary synthesis of Fe2+ and/or Mn2+ phenylphosphonates with the general formula Fe(1-x)Mnx[(C6H5PO3)(H2O)] (with 0 < x < 1), which are then mixed at different molar ratios with lithium carbonate. In this way the carbon, obtained from in situ partial oxidation of the precursor organic part, coats the LiMnxFe(1-x)PO4 particles. After a structural and morphological characterization, the electrochemical behavior of lithium iron manganese phosphates has been compared to the one of pristine LiFePO4 and LiMnPO4, in order to evaluate the doping influence on the material.

Photoinduced hydrogen evolution with new tetradentate cobalt(ii) complexes based on the TPMA ligand.

Hydrogen production from water splitting is nowadays recognized as a target, fundamental reaction for the production of clean fuels. Indeed, tremendous efforts have been devoted towards the research of suitable catalysts capable of performing this reaction. With respect to heterogeneous systems, molecular catalysts such as metal complexes are amenable to chemical functionalization in order to fine tune the catalytic properties. In this paper a new class of tris(2-pyridylmethyl)-amine (TPMA) cobalt(ii) complexes (CoL0-4) has been synthesized and employed as hydrogen evolving catalysts under photochemical conditions taking advantage of Ru(bpy)3(2+) (where bpy is 2,2'-bipyridine) as a light-harvesting sensitizer and ascorbic acid as a sacrificial electron donor. Tuning of the photocatalytic activity has been attempted through the introduction of different substituents at the catalyst periphery rather than through a direct chemical modification of the chelating TPMA ligand. The results show that CoL0-4 behave as competent hydrogen evolving catalysts (HECs), although the effects played by the different substituents on the catalysis are relatively modest. Possible reasons supporting the observed behavior as well as possible improvements of the aforementioned tuning approach are discussed.

Magnetic force microscopy: quantitative issues in biomaterials.

Magnetic force microscopy (MFM) is an atomic force microscopy (AFM) based technique in which an AFM tip with a magnetic coating is used to probe local magnetic fields with the typical AFM spatial resolution, thus allowing one to acquire images reflecting the local magnetic properties of the samples at the nanoscale. Being a well established tool for the characterization of magnetic recording media, superconductors and magnetic nanomaterials, MFM is finding constantly increasing application in the study of magnetic properties of materials and systems of biological and biomedical interest. After reviewing these latter applications, three case studies are presented in which MFM is used to characterize: (i) magnetoferritin synthesized using apoferritin as molecular reactor; (ii) magnetic nanoparticles loaded niosomes to be used as nanocarriers for drug delivery; (iii) leukemic cells labeled using folic acid-coated core-shell superparamagnetic nanoparticles in order to exploit the presence of folate receptors on the cell membrane surface. In these examples, MFM data are quantitatively analyzed evidencing the limits of the simple analytical models currently used. Provided that suitable models are used to simulate the MFM response, MFM can be used to evaluate the magnetic momentum of the core of magnetoferritin, the iron entrapment efficiency in single vesicles, or the uptake of magnetic nanoparticles into cells.

Determination of amino acid enantiopurity and absolute configuration: synergism between configurationally labile metal-based receptors and dynamic covalent interactions.

Reliable determination of the enantiomeric excess of free amino acids can be obtained by measuring the induced circular dichroism of a multicomponent assembly formed by a modified tris(2-pyridylmethyl)amine ligand, a zinc salt, and the amino acid of interest. The systems furnish reliable information for all natural amino acids.

(+)-syn-Benzotriborneol an enantiopure C3-symmetric receptor for water.

(+)-syn-Benzotriborneol forms stable complexes with one molecule of water. This is due to the ability of the host to form three hydrogen bonds with water, to act simultaneously as a hydrogen-bond acceptor and donor, and to a perfect geometrical match between the pair. We report experimental (X-ray and neutron diffraction, VT NMR, DSC, TGA) and stereochemical studies carried out to elucidate and quantify the molecular and thermodynamic aspects of this supramolecular complex.

Pyrylium monolayers as amino-reactive platform.

A new monolayer platform based on pyrylium has been developed which is reactive towards amine-terminated (bio)molecules. Upon reaction, a switch in fluorescence properties of the monolayer signifies successful immobilization of these molecules.

Nanoscale in situ morphological study of proteins immobilized on gold thin films.

The nanoscale organization of acetylcholinesterase (AChE) and of its polyclonal antibody immobilized on gold thin films was studied by means of Energy Dispersive X-ray Reflectometry (EDXR) and Atomic Force Microscopy (AFM). The macromolecules were alternatively deposited over a self-assembled monolayer (SAM) of N-hydroxysuccinimide esters of thioctic acid. The measurements, collected in situ at subsequent deposition stages of the device, gave information on the distribution of the macromolecules on the surface showing that both the proteins can bind covalently to the SAM. In addition to this, we demonstrated that the antigen-antibody reaction takes place when one of the two reactants is anchored to the surface.

Culture of skeletal muscle cells in unprecedented proximity to a gold surface.

Culturing of skeletal muscle cells on conductive surfaces is required to develop electronic device-muscle junctions for tissue engineering and medical applications. We characterized from a molecular and morphological point of view myogenic cells cultured on gold and on cysteamine-coated gold, as compared to the standard plastic for cell culture. Our results show that cell proliferation and survival are comparable between cells grown on either of the gold surface or plastic. The majority of the cells cultured on gold surfaces retain the ability to respond to differentiation cues, as shown by nuclear translocation of myogenin. Following terminal differentiation, the myotubes cultured on cysteamine-coated gold resemble myotube cultures obtained on plastic for the size and orientation of the myotube bundles retaining most of myosin expression; on the contrary, the myotube cultures on gold show a clumped morphology, likely due to repulsive cell-substratum interaction resulting in aberrant differentiation. On the basis of the aforementioned evidences, the culture of muscle cells on cysteamine-coated gold represents an advance with respect to previously reported substrata. The cysteamine self-assembled monolayer coating is a simple approach to accomplish cultures of myotubes in unprecedented tight proximity to conductive surfaces.