Cow urine as a source of nutrients for Microbial-Induced Calcite Precipitation in sandy soil.

Microbial Induced Calcite Precipitation (MICP) via biostimulation of urea hydrolysis is a biogeochemical process in which soil indigenous ureolytic microorganisms catalyse the decomposition of urea into ammonium and carbonate ions which, in the presence of calcium, precipitate as calcium carbonate minerals. The environmental conditions created by urine in soil resemble those induced by MICP via urea hydrolysis. Thus, this study assesses the suitability of a waste product, cow urine, as a source of nutrients for MICP. Urea stability in fresh and sterilised urine were monitored for a month to cover the length of a potential MICP intervention. An experimental soil column set up was used to compare the soil response to the repeated application of fresh and sterilised cow urine, within pH of 7 and 9, and the chemical-based solution. Urea hydrolysis and the carbonate content in solution were monitored to assess the suitability of the proposed alternative. In addition, the nitrification process was monitored. Key findings indicated i) urea concentration and stability in fresh and sterilised cow urine are suitable for MICP application; ii) the soil response to treatments of cow urine within pH of 7 and 9 are similar to the chemical-based solution; and iii) increasing solution pH results in a faster activation of ureolytic microorganisms and higher carbonate content in solution. These results demonstrate that cow urine is a suitable substitute of the chemical-based MICP application.

Dolerite Fines Used as a Calcium Source for Microbially Induced Calcite Precipitation Reduce the Environmental Carbon Cost in Sandy Soil.

Microbial-Induced Calcite Precipitation (MICP) stimulates soil microbiota to induce a cementation of the soil matrix. Urea, calcium and simple carbon nutrients are supplied to produce carbonates via urea hydrolysis and induce the precipitation of the mineral calcite. Calcium chloride (CaCl2) is typically used as a source for calcium, but basic silicate rocks and other materials have been investigated as alternatives. Weathering of calcium-rich silicate rocks (e.g., basalt and dolerite) releases calcium, magnesium and iron; this process is associated with sequestration of atmospheric CO2 and formation of pedogenic carbonates. We investigated atmospheric carbon fluxes of a MICP treated sandy soil using CaCl2 and dolerite fines applied on the soil surface as sources for calcium. Soil-atmosphere carbon fluxes were monitored over 2 months and determined with an infrared gas analyser connected to a soil chamber. Soil inorganic carbon content and isotopic composition were determined with isotope-ratio mass spectrometry. In addition, soil-atmosphere CO2 fluxes during chemical weathering of dolerite fines were investigated in incubation experiments with gas chromatography. Larger CO2 emissions resulted from the application of dolerite fines (116 g CO2-C m-2) compared to CaCl2 (79 g CO2-C m-2) but larger inorganic carbon precipitation also occurred (172.8 and 76.9 g C m-2, respectively). Normalising to the emitted carbon to precipitated carbon, the environmental carbon cost was reduced with dolerite fines (0.67) compared to the traditional MICP treatment (1.01). The carbon isotopic signature indicated pedogenic carbonates (δ13Cav = -8.2 ± 5.0‰) formed when dolerite was applied and carbon originating from urea (δ13Cav = -46.4 ± 1.0‰) precipitated when CaCl2 was used. Dolerite fines had a large but short-lived (<2 d) carbon sequestration potential, and results indicated peak CO2 emissions during MICP could be balanced optimising the application of dolerite fines.

Prosthetic limb sockets from plant-based composite materials.

BACKGROUND: There is a considerable demand for lower limb prostheses globally due to vascular disease, war, conflict, land mines and natural disasters. Conventional composite materials used for prosthetic limb sockets include acrylic resins, glass and carbon fibres, which produce harmful gasses and dust in their manufacture. OBJECTIVES: To investigate the feasibility of using a renewable plant oil-based polycarbonate-polyurethane copolymer resin and plant fibre composite, instead of conventional materials, to improve safety and accessibility of prosthetic limb manufacture. STUDY DESIGN: Experimental, bench research. METHODS: Test pieces of the resin with a range of plant fibres (10.0% by volume) were prepared and tensile strengths were tested. Test sockets of both conventional composite materials and plant resin with plant fibres were constructed and tested to destruction. RESULTS: Combinations of plant resin and either banana or ramie fibres gave high tensile strengths. The conventional composite material socket and plant resin with ramie composite socket failed at a similar loading, exceeding the ISO 10328 standard. Both wall thickness and fibre-matrix adhesion played a significant role in socket strength. CONCLUSIONS: From this limited study we conclude that the plant resin and ramie fibre composite socket has the potential to replace the standard layup. Further mechanical and biocompatibility testing as well as a full economic analysis is required. CLINICAL RELEVANCE: Using readily sourced and renewable natural fibres and a low-volatile bio-resin has potential to reduce harm to those involved in the manufacture of artificial limb sockets, without compromising socket strength and benefitting clinicians working in poorer countries where safety equipment is scarce. Such composite materials will reduce environmental impact.

Combined effect of high pressure, temperature and holding time on polyphenoloxidase and peroxidase activity in banana (Musa acuminata).

Polyphenoloxidase and peroxidase enzyme activities were evaluated following combined pressure, temperature and holding time treatment in banana (Musa acuminata). Using pressures of up to 110 MPa, temperatures of up to 70 °C and holding times of up to 25 min, based on a 23 central composite design, the interactive effects were found to significantly influence the activity of both enzymes in prepared banana pulp. Temperature and pressure were found to influence the inactivation of polyphenoloxidase separately, while temperature, pressure and holding time were found to influence the loss of peroxidase in the banana, although no significant interactive effects were found. The reduction in polyphenoloxidase activity was found to be less influenced by the combined treatment than peroxidase activity, thought to be due to solubilisation of the enzyme and effects of the soluble solids content. © 2000 Society of Chemical Industry.