The push-pull principle: an electrostatic actuator concept for low distortion acoustic transducers.

Electrostatic actuators are of particular interest for microsystems (MEMS), and in particular for MEMS audio transducers for use in advanced true wireless applications. They are attractive because of their typically low electrical capacitance and because they can be fabricated from materials that are compatible with standard complementary metal-oxide semiconductor (CMOS) technology. For high audio performance and in particular low harmonic distortion (THD) the implementation of the push-pull principle provides strong benefits. With an arrangement of three electrodes in a conjunct moving configuration on a beam, we demonstrate here for the first time a balanced bending actuator incarnating the push-pull principle operating at low voltages. Our first design already exhibits a harmonic distortion as low as 1.2% at 79 dB using a signal voltage of only 6 Vp and a constant voltage of only ±10 Vdc in a standard acoustic measurement setup. Thus, exceeding our previously reported approach in all three key performance indications at the same time. We expect that our novel electrode configurations will stimulate innovative electrostatic actuator developments for a broad range of applications. In this paper we report the basic theory, the fabrication and the performance of our novel actuator design acting as an audio transducer.

Coulomb-actuated microbeams revisited: experimental and numerical modal decomposition of the saddle-node bifurcation.

Electrostatic micromechanical actuators have numerous applications in science and technology. In many applications, they are operated in a narrow frequency range close to resonance and at a drive voltage of low variation. Recently, new applications, such as microelectromechanical systems (MEMS) microspeakers (µSpeakers), have emerged that require operation over a wide frequency and dynamic range. Simulating the dynamic performance under such circumstances is still highly cumbersome. State-of-the-art finite element analysis struggles with pull-in instability and does not deliver the necessary information about unstable equilibrium states accordingly. Convincing lumped-parameter models amenable to direct physical interpretation are missing. This inhibits the indispensable in-depth analysis of the dynamic stability of such systems. In this paper, we take a major step towards mending the situation. By combining the finite element method (FEM) with an arc-length solver, we obtain the full bifurcation diagram for electrostatic actuators based on prismatic Euler-Bernoulli beams. A subsequent modal analysis then shows that within very narrow error margins, it is exclusively the lowest Euler-Bernoulli eigenmode that dominates the beam physics over the entire relevant drive voltage range. An experiment directly recording the deflection profile of a MEMS microbeam is performed and confirms the numerical findings with astonishing precision. This enables modeling the system using a single spatial degree of freedom.

Concept and proof for an all-silicon MEMS micro speaker utilizing air chambers.

MEMS-based micro speakers are attractive candidates as sound transducers for smart devices, particularly wearables and hearables. For such devices, high sound pressure levels, low harmonic distortion and low power consumption are required for industrial, consumer and medical applications. The ability to integrate with microelectronic circuitry, as well as scalable batch production to enable low unit costs, are the key factors benchmarking a technology. The Nanoscopic Electrostatic Drive based, novel micro speaker concept presented in this work essentially comprises in-plane, electrostatic bending actuators, and uses the chip volume rather than the its surface for sound generation. We describe the principle, design, fabrication, and first characterization results. Various design options and governing equations are given and discussed. In a standard acoustical test setup (ear simulator), a MEMS micro speaker generated a sound pressure level of 69 dB at 500 Hz with a total harmonic distortion of 4.4%, thus proving the concept. Further potential on sound pressure as well as linearity improvement is outlined. We expect that the described methods can be used to enhance and design other MEMS devices and foster modeling and simulation approaches.

Evaluation of the carcinogenicity of gallium arsenide.

Gallium arsenide (GaAs) is an important semiconductor material. In 2-year inhalation studies, GaAs increased the incidence of lung tumors in female rats, but not in male rats or male and female mice. Alveolar proteinosis followed by chronic active inflammation was the predominant non-neoplastic pulmonary findings. IARC classified GaAs as carcinogenic to humans (group 1) based on the assumption that As and Ga ions are bioavailable. The European Chemical Agency Risk Assessment Committee concluded that GaAs should be classified into Carcinogenicity Category 1B (presumed to have carcinogenic potential for humans; ECHA). We evaluate whether these classifications are justified. Physico-chemical properties of GaAs particles and the degree of mechanical treatment are critical in this evaluation. The available data on mode of action (MOA), genotoxicity and bioavailability do not support the contribution of As or Ga ions to the lung tumors in female rats. Most toxicological studies utilized small particles produced by strong mechanical treatment, destroying the crystalline structure. The resulting amorphous GaAs is not relevant to crystalline GaAs at production and processing sites. The likely tumorigenic MOA is lung toxicity related to particulate-induced inflammation and increased proliferation. It is concluded that there is no evidence for a primary carcinogenic effect of GaAs.