Reversed-phase LC determination of two manufacturing intermediates, the unsulfonated subsidiary color, and 4-methyl-Sudan I in D&C Red No. 6, D&C Red No. 7, and their lakes.

A reversed-phase liquid chromatographic (LC) method was developed to determine 4 impurities in the monosulfo monoazo color additives D&C Red No. 6, D&C Red No. 7, and their lakes. Manufacturing intermediates determined are 2-amino-5-methylbenzenesulfonic acid (PTMS) and 3-hydroxy-2-naphthalenecarboxylic acid (3-hydroxy-2-naphthoic acid). Subsidiary colors determined are the unsulfonated and uncarboxylated, unsulfonated homologs of the dye (the unsulfonated subsidiary color and 4-methyl-Sudan I). The new method uses lithium oxalate as part of a novel system to dissolve the water-insoluble color additives. The 4 impurities were identified by LC and UV-visible spectrophotometry; the 4-methyl-Sudan I was confirmed by LC/mass spectrometry. LC peak area calibrations were generally linear (R > 0.999), and recoveries ranged from 90 to 105%. The limits of determination used were 0.02% each for PTMS and 3-hydroxy-2-naphthoic acid, 0.1% for the unsulfonated subsidiary color, and 0.002% for 4-methyl-Sudan I. The relative standard deviations at the specification levels ranged from 0.7 to 22.7%. Survey analyses of 26 samples of certified D&C Red Nos. 6 and 7 straight colors and lakes from 11 domestic and foreign manufacturers yielded results that agree with those previously obtained using 3 other methods.

Direct method for determination of Sudan I in FD&C Yellow No. 6 and D&C Orange No. 4 by reversed-phase liquid chromatography.

A reversed-phase liquid chromatographic method was developed to determine parts-per-million and higher levels of Sudan 1, 1-(phenylazo)-2-naphthalenol, in the disulfo monoazo color additive FD&C Yellow No. 6 and in a related monosulfo monoazo color additive, D&C Orange No. 4. Sudan I, the corresponding unsulfonated monoazo dye, is a known impurity in these color additives. The color additives are dissolved in water and methanol, and the filtered solutions are directly chromatographed, without extraction or concentration, by using gradient elution at 0.25 mL/min. Calibrations from peak areas at 485 nm were linear. At a 99% confidence level, the limits of determination were 0.008 microg Sudan I/mL (0.4 ppm) in FD&C Yellow No. 6 and 0.011 microg Sudan I/mL (0.00011%) in D&C Orange No. 4. The confidence intervals were 0.202 +/- 0.002 microg Sudan I/mL (10.1 +/- 0.1 ppm) near the specification level for Sudan I in FD&C Yellow No. 6 and 20.0 +/- 0.2 microg Sudan I/mL (0.200 +/- 0.002%) near the highest concentration of Sudan I found in D&C Orange No. 4. A survey was conducted to determine Sudan I in 28 samples of FD&C Yellow No. 6 from 17 international manufacturers over 3 years, and in a pharmacology-tested sample. These samples were found to contain undetected levels (16 samples), 0.5-9.7 ppm Sudan I (0.01-0.194 microg Sudan I/mL in analyzed solutions; 11 samples including the pharmacology sample), and > or =10 ppm Sudan I (> or = 0.2 microg Sudan I/mL; 2 samples). Analyses of 21 samples of D&C Orange No. 4 from 8 international manufacturers over 4 years found Sudan I at undetected levels (8 samples), 0.0005 to < 0.005% Sudan I (0.05 to < 0.5 microg Sudan I/mL in analyzed solutions; 3 samples, including a pharmacology batch), 0.005 to <0.05% Sudan I (0.5 to <5 microg Sudan I/mL; 9 samples), and 0.18% Sudan I (18 microg Sudan I/mL; 1 sample).