Plastic Fruit Stickers in Industrial Composting─Surface and Structural Alterations Revealed by Electron Microscopy and Computed Tomography.

Often large quantities of plastics are found in compost, with price look-up stickers being a major but little-explored component in the contamination path. Stickers glued to fruit or vegetable peels usually remain attached to the organic material despite sorting processes in the composting plant. Here, we investigated the effects of industrial composting on the structural alterations of these stickers. Commercial polypropylene (PP) stickers on banana peels were added to a typical organic material mixture for processing in an industrial composting plant and successfully resampled after a prerotting (11 days) and main rotting step (25 days). Afterward, both composted and original stickers were analyzed for surface and structural changes via scanning electron microscopy, Fourier-transform infrared spectroscopy, and micro- and nano-X-ray computed tomography (CT) combined with deep learning approaches. The composting resulted in substantial surface changes and degradation in the form of microbial colonization, deformation, and occurrence of cracks in all stickers. Their pore volumes increased from 16.7% in the original sticker to 26.3% at the end of the compost process. In a similar way, the carbonyl index of the stickers increased. Micro-CT images additionally revealed structural changes in the form of large adhesions that penetrated the surface of the sticker. These changes were accompanied by delamination after 25 days of composting, thus overall hinting at the degradation of the stickers and the subsequent formation of smaller microplastic pieces.

Atomic Layer Deposition and Strain Analysis of Epitaxial GaN-ZnO Core-Shell Nanowires.

We demonstrate the epitaxial coating of GaN NWs with an epitaxial ZnO shell by atomic layer deposition at 300 °C. Scanning transmission electron microscopy proves a sharp and defect-free coherent interface. The strain in the core-shell structure due to the lattice mismatch and different thermal expansion coefficients of GaN and ZnO was analyzed using 4D-STEM strain mapping and Raman spectroscopy and compared to theoretical calculations. The results highlight the outstanding advantages of epitaxial shell growth using atomic layer deposition, e.g., conformal coating and precise thickness control.

3D Nanolithography by Means of Lipid Ink Spreading Inhibition.

While patterning 2D metallic nanostructures are well established through different techniques, 3D printing still constitutes a major bottleneck on the way to device miniaturization. In this work a fluid phase phospholipid ink is used as a building block for structuring with dip-pen nanolithography. Following a bioinspired approach that relies on ink-spreading inhibition, two processes are presented to build 2D and 3D metallic structures. Serum albumin, a widely used protein with an innate capability to bind to lipids, is the key in both processes. Covering the sample surface with it prior to lipid writing, anchors lipids on the substrate, which ultimately allows the creation of highly stable 3D lipid-based scaffolds to build metallic structures.

Exploring the influence of focused ion beam processing and scanning electron microscopy imaging on solid-state electrolytes.

Performing reliable preparation of transmission electron microscopy (TEM) samples is the necessary basis for a meaningful investigation by ex situ and even more so by in situ TEM techniques, but it is challenging using materials that are sensitive to electron beam irradiation. Focused ion beam is currently the most commonly employed technique for a targeted preparation, but the structural modifications induced during focused ion beam preparation are not fully understood for a number of materials. Here, we have investigated the impact of both the electron and the Ga+ ion beam on insulating solid-state electrolytes (lithium phosphorus oxynitride, Na-ß"-alumina solid electrolyte and Na3.4Si2.4Zr2P0.6O12 (NaSICON)) and observed significant lithium/sodium whisker growth induced by both the electron and ion beam already at fairly low dose, leading to a significant change in the chemical composition. The metal whisker growth is presumably mainly due to surface charging, which can be reduced by coating with a gold layer or preparation under cryogenic conditions as efficient approaches to stabilize the solid electrolyte for scanning electron microscopy imaging and TEM sample preparation. Details on the different preparation approaches, the acceleration voltage dependence and the induced chemical and morphological changes are reported.

Correlated Study of Material Interaction Between Capillary Printed Eutectic Gallium Alloys and Gold Electrodes.

Liquid metals (LMs) play a growing role in flexible electronics and connected applications. Here, LMs come into direct contact with metal electrodes thus allowing for corrosion and additional alloying, potentially compromising device stability. Nevertheless, comprehensive studies on the interfacial interaction of the materials are still sparse. Therefore, a correlated material interaction study of capillary-printed Galinstan (eutetic alloy of Ga/In/Sn) with gold surfaces and electrodes is conducted. Comprehensive application of optical microscopy, vertical scanning interferometry, scanning electron microscopy/spectroscopy, x-ray photon spectroscopy, and atomic force microscopy allow for an in depth characterization of the spreading process of LM lines on gold films, revealing the differential spread of the different LM components and the formation of intermetallic nanostructures on the surface of the surrounding gold film. A model for the growth process based on the penetration of LM along the gold film grain boundaries is proposed based on the obtained time-dependent characterization. The distribution of gold, Galinstan, and intermetallic phases in a gold wire dipped into LM is observed using X-ray nano tomography as a complementary view on the internal nanostructure. Finally, resistance measurements on LM lines connecting gold electrodes over time allow to estimate the influence on the material interaction on electronic applications.

Nanowire facilitated transfer of sensitive TEM samples in a FIB.

We introduce a facile approach to transfer thin films and other mechanically sensitive TEM samples inside a FIB with minimal introduction of stress and bending. The method is making use of a pre-synthetized flexible freestanding Ag nanowire attached to the tip of a typical tungsten micromanipulator inside the FIB. The main advantages of this approach are the significantly reduced stress-induced bending during transfer and attachment of the TEM sample, the very short time required to attach and cut the nanowire, the operation at very low dose and ion current, and only using the e-beam for Pt deposition during the transfer of sensitive TEM samples. This results in a reduced sample preparation time and reduced exposure to the ion beam or e-beam for Pt deposition during the sample preparation and thus also reduced contamination and beam damage. The method was applied to a number of thin films and different TEM samples in order to illustrate the advantageous benefits of the concept. In particular, the technique has been successfully tested for the transfer of a thin film onto a MEMS heating chip for in situ TEM experiments.

Numerical Modelling of a Nanopore-based Resistive-Pulse Sensor for Detection of Biomolecules.

Resistive pulse sensors (RPS) are based on the detection principle of partial and non-permanent obstruction of an electrically conducting channel. The integration of RPS in microfluidics has the potential for detections at the molecular level. Current challenges involve limitations in fabrication technology, most notably the finite structure accuracy and fabrication repeatability, which have a direct and strong impact on RPS device performance. In this work, we analyzed the geometrical structure and performance of a nanofabricated RPS device and iteratively used the experimental data to propose an adequate numerical model which also accounts for fabrication imperfections beyond the optical resolution limit. The proposed model for a nano-RPS was validated and able to augment the understating of the structure and operation of a microdevice.Clinical Relevance- This work is part of a greater effort to bring microfluidics devices closer to patients for bedside analysis of blood, or other human fluids, for instance. These devices can potentially perform screening for multiple targets in one sample. New devices often need to go through design, prototyping and bench tests, simulation models as the one presented can increase the chances of the device to get to the market in reduced time.

First-time synthesis of a magnetoelectric core-shell composite via conventional solid-state reaction.

In recent years, multiferroics and magnetoelectrics have demonstrated their potential for a variety of applications. However, no magnetoelectric material has been translated to a real application yet. Here, we report for the first time that a magnetoelectric core-shell ceramic, is synthesized via a conventional solid-state reaction, where core-shell grains form during a single sintering step. The core consists of ferrimagnetic CoFe2O4, which is surrounded by a ferroelectric shell consisting of (BiFeO3)x-(Bi1/2K1/2TiO3)1-x. We establish the core-shell nature of these grains by transmission-electron microscopy (TEM) and find an epitaxial crystallographic relation between core and shell, with a lattice mismatch of 6 ± 0.7%. The core-shell grains exhibit exceptional magnetoelectric coupling effects that we attribute to the epitaxial connection between the magnetic and ferroelectric phase, which also leads to magnetic exchange coupling as demonstrated by neutron diffraction. Apparently, ferrimagnetic CoFe2O4 cores undergo a non-centrosymmetric distortion of the crystal structure upon epitaxial strain from the shell, which leads to simultaneous ferrimagnetism and piezoelectricity. We conclude that in situ core-shell ceramics offer a number of advantages over other magnetoelectric composites, such as lower leakage current, higher density and absence of substrate clamping effects. At the same time, the material is predestined for application, since its preparation is cost-effective and only requires a single sintering step. This discovery adds a promising new perspective for the application of magnetoelectric materials.

Electron Beam Effects on Oxide Thin Films-Structure and Electrical Property Correlations.

In situ transmission electron microscope (TEM) characterization techniques provide valuable information on structure-property correlations to understand the behavior of materials at the nanoscale. However, understanding nanoscale structures and their interaction with the electron beam is pivotal for the reliable interpretation of in situ/ex situ TEM studies. Here, we report that oxides commonly used in nanoelectronic applications, such as transistor gate oxides or memristive devices, are prone to electron beam induced damage that causes small structural changes even under very low dose conditions, eventually changing their electrical properties as examined via in situ measurements. In this work, silicon, titanium, and niobium oxide thin films are used for in situ TEM electrical characterization studies. The electron beam induced reduction of the oxides turns these insulators into conductors. The conductivity change is reversible by exposure to air, supporting the idea of electron beam reduction of oxides as primary damage mechanism. Through these measurements we propose a limit for the critical dose to be considered for in situ scanning electron microscopy and TEM characterization studies.

Microstrain and electrochemical performance of garnet solid electrolyte integrated in a hybrid battery cell.

Garnet type solid electrolytes are promising candidates for replacing the flammable liquid electrolytes conventionally used in Li-ion batteries. Al-doped Li7La3Zr2O12 (LLZO) is synthesized using nebulized spray pyrolysis and field assisted sintering technology (FAST), a novel synthesis route ensuring the preparation of samples with a homogeneous elemental distribution and dense ceramic electrolytes. Ceramic preparation utilizing field assisted sintering, in particular the applied pressure, has significant influence on the material structure, i.e. microstrain, and thereby its electrochemical performance. The phenomenon of microstrain enhancement of electrochemical performance might open a new route towards improved garnet solid electrolytes. A detailed mechanism is proposed for the lattice distortion and resulting microstrain during sintering. The charge transfer resistance of Li-ions at the interface between LLZO and Li is characterized using AC impedance spectroscopy and is amongst the best reported values to date. Additionally, the solid electrolyte is integrated in a full hybrid cell, a practical approach combining all the advantages of the solid electrolyte, while maintaining good contact with the cathode material.

A new bioinspired method for pressure and flow sensing based on the underwater air-retaining surface of the backswimmer Notonecta.

In technical systems, static pressure and pressure changes are usually measured with piezoelectric materials or solid membranes. In this paper, we suggest a new biomimetic principle based on thin air layers that can be used to measure underwater pressure changes. Submerged backswimmers (Notonecta sp.) are well known for their ability to retain air layers on the surface of their forewings (hemelytra). While analyzing the hemelytra of Notonecta, we found that the air layer on the hemelytra, in combination with various types of mechanosensitive hairs (clubs and pins), most likely serve a sensory function. We suggest that this predatory aquatic insect can detect pressure changes and water movements by sensing volume changes of the air layer under water. In the present study, we used a variety of microscopy techniques to investigate the fine structure of the hemelytra. Furthermore, we provide a biomimetic proof of principle to validate our hypothesis. The suggested sensory principle has never been documented before and is not only of interest for sensory biologists but can also be used for the development of highly sensitive underwater acoustic or seismographic sensory systems.

Correlative Multiscale 3D Imaging of a Hierarchical Nanoporous Gold Catalyst by Electron, Ion and X-ray Nanotomography.

Tomographic imaging of catalysts allows non-invasive investigation of structural features and chemical properties by combining large fields of view, high spatial resolution, and the ability to probe multiple length scales. Three complementary nanotomography techniques, (i) electron tomography, (ii) focused ion beam-scanning electron microscopy, and (iii) synchrotron ptychographic X-ray computed tomography, were applied to render the 3D structure of monolithic nanoporous gold doped with ceria, a catalytically active material with hierarchical porosity on the nm and µm scale. The resulting tomograms were used to directly measure volume fraction, surface area and pore size distribution, together with 3D pore network mapping. Each technique is critically assessed in terms of approximate spatial resolution, field of view, sample preparation and data processing requirements. Ptychographic X-ray computed tomography produced 3D electron density maps with isotropic spatial resolution of 23 nm, the highest so far demonstrated for a catalyst material, and is highlighted as an emerging method with excellent potential in the field of catalysis.

Adsorption of steroid micropollutants on polymer-based spherical activated carbon (PBSAC).

Removal and interaction mechanisms of four different steroid micropollutants, estrone (E1), estradiol (E2), progesterone (P) and testosterone (T) were determined for different types of polymer-based spherical activated carbon (PBSAC). Higher than 90% removal and significantly faster kinetics compared to conventional granular activated carbon (GAC) were observed, while performance was comparable with powdered activated carbon (PAC). No influence of pH in the range 2-12 was determined, while the presence of humic acid (HA) reduced both the removal and the kinetic by up to 20%. PBSAC was characterized in terms of morphology and material properties. The low oxygen content was identified as the main cause for the high performance observed. This was attributed to the enhancement of the hydrophobic effect between PBSAC and hormones and the reduced interactions between PBSAC and water. The ratio of micropollutant size (∼0.8nm) and average pore size (1-2nm) proved ideal for both micropollutant adsorption and HA exclusion. The homogenous size, spherical shape and surface smoothness of PBSAC did not influence adsorption negatively and make PBSAC a very promising sorbent for a vast range of applications, in particular for the removal of micropollutants in water treatment applications.

In situ TEM studies of micron-sized all-solid-state fluoride ion batteries: Preparation, prospects, and challenges.

Trustworthy preparation and contacting of micron-sized batteries is an essential task to enable reliable in situ TEM studies during electrochemical biasing. Some of the challenges and solutions for the preparation of all-solid-state batteries for in situ TEM electrochemical studies are discussed using an optimized focused ion beam (FIB) approach. In particular redeposition, resistivity, porosity of the electrodes/electrolyte and leakage current are addressed. Overcoming these challenges, an all-solid-state fluoride ion battery has been prepared as a model system for in situ TEM electrochemical biasing studies and first results on a Bi/La0.9 Ba0.1 F2.9 half-cell are presented. Microsc. Res. Tech. 79:615-624, 2016. © 2016 Wiley Periodicals, Inc.

Fabrication of Conductive 3D Gold-Containing Microstructures via Direct Laser Writing.

3D conductive microstructures containing gold are fabricated by simultaneous photopolymerization and photoreduction via direct laser writing. The photoresist employed consists of water-soluble polymers and a gold precursor. The fabricated microstructures show good conductivity and are successfully employed for 3D connections between gold pads.

In Situ Ptychography of Heterogeneous Catalysts using Hard X-Rays: High Resolution Imaging at Ambient Pressure and Elevated Temperature.

A new closed cell is presented for in situ X-ray ptychography which allows studies under gas flow and at elevated temperature. In order to gain complementary information by transmission and scanning electron microscopy, the cell makes use of a Protochips E-chipTM which contains a small, thin electron transparent window and allows heating. Two gold-based systems, 50 nm gold particles and nanoporous gold as a relevant catalyst sample, were used for studying the feasibility of the cell. Measurements showing a resolution around 40 nm have been achieved under a flow of synthetic air and during heating up to temperatures of 933 K. An elevated temperature exhibited little influence on image quality and resolution. With this study, the potential of in situ hard X-ray ptychography for investigating annealing processes of real catalyst samples is demonstrated. Furthermore, the possibility to use the same sample holder for ex situ electron microscopy before and after the in situ study underlines the unique possibilities available with this combination of electron microscopy and X-ray microscopy on the same sample.

Charge generation layers for solution processed tandem organic light emitting diodes with regular device architecture.

Tandem organic light emitting diodes (OLEDs) utilizing fluorescent polymers in both sub-OLEDs and a regular device architecture were fabricated from solution, and their structure and performance characterized. The charge carrier generation layer comprised a zinc oxide layer, modified by a polyethylenimine interface dipole, for electron injection and either MoO3, WO3, or VOx for hole injection into the adjacent sub-OLEDs. ToF-SIMS investigations and STEM-EDX mapping verified the distinct functional layers throughout the layer stack. At a given device current density, the current efficiencies of both sub-OLEDs add up to a maximum of 25 cd/A, indicating a properly working tandem OLED.

Self-organization of mesoscopic silver wires by electrochemical deposition.

Long, straight mesoscale silver wires have been fabricated from AgNO3 electrolyte via electrodeposition without the help of templates, additives, and surfactants. Although the wire growth speed is very fast due to growth under non-equilibrium conditions, the wire morphology is regular and uniform in diameter. Structural studies reveal that the wires are single-crystalline, with the [112] direction as the growth direction. A possible growth mechanism is suggested. Auger depth profile measurements show that the wires are stable against oxidation under ambient conditions. This unique system provides a convenient way for the study of self-organization in electrochemical environments as well as for the fabrication of highly-ordered, single-crystalline metal nanowires.