RESUMO
Post the enforcement of the Global Sulphur Cap 2020, large amounts of marine fuel have been produced as a mixture of two or more components to achieve a sulfur level of less than 0.5 wt %. This has led to the wider use of diluents or cutter stocks from different origins to comply with the quality requirements of the ISO 8217 standard. These can often be bio- or alternative components with a lower level of stability. This makes it crucial to select components that are compatible and form a homogeneous mixture. The ISO 8217 standard provides commercial and operational protection; however, the stability of the fuel deteriorates over time. Therefore, the purpose of this study was to develop an adequate component or additive to improve the colloidal stability of marine fuels. A set of laboratory-prepared samples was used to verify the positive effects of the addition of a light cycle oil and also a newly developed additive (containing 30 wt % naphthalene as the simple diaromatic hydrocarbon in tetralin). The prepared fuels (with effective additive dosage), when stored for 60 days, maintained the total sediment accelerated (TSA) parameters, confirming the stability of the fuels. The additive converted the unsaleable fuel into fuel that complied with the requirements of ISO 8217. The developed additive can be used for industrial applications in marine fuel production.
RESUMO
In this paper, the fuel properties of mixtures of diesel fuel and ethanol and diesel fuel and butanol in the ratio of 2.5% to 30% were investigated. The physicochemical properties of the blends such as the cetane number, cetane index, density, flash point, kinematic viscosity, lubricity, CFPP, and distillation characteristics were measured, and the effect on fuel properties was evaluated. These properties were compared with the current EN 590+A1 standard to evaluate the suitability of the blends for use in unmodified engines. The alcohols were found to be a suitable bio-component diesel fuel additive. For most physicochemical properties, butanol was found to have more suitable properties than ethanol when used in diesel engines. The results show that for some properties, a butanol-diesel fuel mixture can be mixed up to a ratio of 15%. Other properties would meet the standard by a suitable choice of base diesel.
RESUMO
This paper focuses on the evaluation of the fuel properties of Fischer-Tropsch diesel blends with conventional diesel. Incorporating this advanced fuel into conventional diesel production will enable the use of waste materials and non-food materials as resources, while contributing to a reduction in dependence on crude oil. To evaluate the suitability of using Fischer-Tropsch diesel, cetane number, cetane index, CFPP, density, flash point, heat of combustion, lubricity, viscosity, distillation curve, and fuel composition ratios using multidimensional GC × GC-TOFMS for different blends were measured. It was found that the fuel properties of the blended fuel are comparable to conventional diesel and even outperform conventional fuel in some parameters. All measurements were performed according to current standards, thus ensuring the repeatability of measurements for other research groups or the private sector.
