The effect of a collar on primary stability of standard and undersized cementless hip stems: a biomechanical study.

INTRODUCTION: Aseptic loosening and periprosthetic fractures are main reasons for revision after THA. Quite different from most other stem systems, Corail cementless hip stems show better survival rates than their cemented counterpart, which can possibly be explained by the use of a collar. The study aimed to investigate primary stability with standard and undersized hip stems both collared and collarless. MATERIALS AND METHODS: Primary stability of cementless, collared and collarless, femoral stems was measured in artificial bones using both undersized and standard size. After preconditioning, 3D micromotion was measured under cyclic loading at the bone-implant interface. RESULTS: The use of a collar resulted in higher micromotion within the same stem size but showed no statistically significant difference for both standard and undersized hip stems. The collared and collarless undersized stems showed no significant differences in 3D micromotion at the upper measuring positions compared to the standard stem size. Micromotion was significantly higher in the distal measuring positions, with and without collar, for the undersized stems (vs. standard collarless stem size). CONCLUSION: The key finding is that the collarless and collared Corail hip stems, within one stem size, showed no significant differences in primary stability. Undersized stems showed significantly higher micromotion in the distal area both with and without collar.

Femoral Neck System versus Three Cannulated Screws for Fixation of Femoral Neck Fractures in Younger Patients: A Retrospective Cohort Study.

OBJECTIVE: To compare the clinical results of a new femoral neck system (FNS) and cannulated compression screws (CCS) for the treatment of femoral neck fractures in younger patients. METHODS: Retrospective study was performed in younger patients with femoral neck fractures that were treated with FNS or CCS from August 2017 to August 2022. The hip functional outcomes were assessed with the Harris hip score (HHS). Secondary outcomes included the surgical time, surgical blood loss, satisfaction visual analog scale (VAS), fluoroscopy frequency, fracture healing time and complications. RESULTS: A total of 49 patients (22 FNS and 27 CCS) with a minimum follow-up of 12 months were included. There was also no significant difference in HHSs (p = 0.27) and satisfaction VAS (p = 0.10) between them. Patients with FNS had more blood loss (50.45 ± 5.28 mL vs. 20.67 ± 4.71 ml, p < 0.01), lower fluoroscopy frequency (16.64 ± 3.32 vs. 23.59 ± 3.39, p < 0.01) and lower fracture healing time (3.76 ± 0.42 vs. 4.46 ± 0.59 months, p < 0.01). The femoral neck shortening and incidence of nail withdrawal in the FNS group was significantly lower than CCS group (2.91 ± 1.95 vs. 4.44 ± 1.52 mm, p < 0.01; 4.5% vs. 22.2%, p = 0.03). CONCLUSIONS: The FNS and CCS get similar hip functions. The FNS can reduce fluoroscopy exposure and the complications such as femoral neck shortening and nail withdrawal. Thus, FNS can be an alternative to CCS for the fixation of femoral neck fractures in younger patients.

Leukocyte esterase and alpha-defensin in periprosthetic joint infection: predictive quality and correlation in a prospective study.

PURPOSE: Periprosthetic joint infection (PJI) is a rare but serious complication of total joint arthroplasty (TJA). An accurate diagnosis of PJI preoperatively does not exist. Alpha-defensin (AD) is a proven and common indicator. The diagnostic marker of leukocyte esterase (LE) promises some advantages: feasibility, availability, and fast result reporting. The aim of this study was the evaluation of the predictive quality and correlation between both diagnostic tools in the diagnosis of PJI. METHODS: A prospective study was conducted between April 2018 and August 2022. All patients with suspicion of PJI on hip and knee joint were included and underwent a routine and standardized joint punction. For laboratory diagnostics of AD, the synovial liquid was analyzed by ELISA. The sample was additionally applied to a LE test strip (Combur 10 Test, Roche Diagnostics, Mannheim, Germany). RESULTS: A total of 249 patients were examined (mean age 67.12 ± 11.89; gender distribution man/woman 139 (55.8%)/110(44.2%), hip/knee 71(28.5%)/178 (71.5%). According to EBJIS criteria, PJI was diagnosed in 54 (21.7%) patients. AD showed excellent results with an AUC of 0.930 (sensitivity/specificity 0.870/0.990). LE yielded very good results with an AUC of 0.820 (sensitivity/specificity 0.722/0.918). Both parameters showed a strong positive correlation. CONCLUSION: LE is a rapidly available alternative in PJI diagnostics. The simultaneous determination of both markers may enhance diagnostic reliability. A routine usage may shorten the time from diagnosis to treatment of PJI.

Management of comminuted inferior patellar pole fractures with cerclage-wire-augmented separate vertical wiring: a retrospective clinical study.

PURPOSE: Comminuted inferior patellar pole fractures are challenging injuries and require effective treatment due to the extension mechanism of the knee. This study aims to evaluate the outcome of above fractures treated with a modified technique of cerclage-wire-augmented separate vertical wiring (SVW) with cerclage wiring passed through the proximal patella. METHODS: Retrospective analysis (1/2017-1/2020) were performed for patients that were treated with three SVWs through the posterior margin of proximal fragment and directly to the anterosuperior border of patella, combined with a cerclage wiring passed through the proximal patella. Patients who experienced comminuted inferior patellar pole fractures within 3 weeks were included, and the outcome was evaluated radiologically and clinically by Bostman score after a minimum of 12 months following surgery. Further evaluation included the operation time and complication rate. RESULTS: A total of 20 patients (10 males, 10 females) with a mean age of 54 ± 14.5 years (26-83 years) and a follow-up of 18.9 ± 6.6 months (12-36 months) were evaluated. The average operation time was 45.7 ± 8.8 min (30-60 min). At final follow-up, the average range of motion was 131.3° ± 3.5° (125°-135°), and the mean Bostman score was 29.4 ± 0.7 points (28-30) and graded excellent in all cases. Two patients experienced occasional giving way of the knee. Radiologically no loss of reduction, implant breakage, nonunion or skin irritation was observed. CONCLUSIONS: The cerclage-wire-augmented SVW with cerclage wiring passed through the proximal patella appears to be a safe and simple technique which can effectively treat the comminuted inferior patellar pole fractures.

Risk of Periprosthetic Joint Infection after Posttraumatic Hip Arthroplasty following Acetabular Fractures.

BACKGROUND: Raised complication rates have been reported for total hip arthroplasty (THA) in posttraumatic hip joints after acetabular fractures with prior open reduction and internal fixation (ORIF). The present study evaluated (I) postoperative surgical site infection and the risk of early infection following THA in posttraumatic hip joints after acetabular fractures and (II) the discriminatory ability of preoperative C-reactive protein (CRP) blood levels for periprosthetic joint infection (PJI). MATERIALS AND METHODS: Patients were included who had undergone THA (2014-2019) after prior ORIF, and nonsurgically treated acetabular fractures. Patients' demographics and the duration between fracture and THA implantation were assessed. Preoperative diagnostic testing (laboratory results, hip aspirations) as well as the results of intraoperative microbiological swabs and sonication were also evaluated. Postoperative complications were recorded. RESULTS: Sixty-seven patients (51 men/16 women) were included, with a mean age of 54.7 ± 14.0 years (range: 18.0-82.9). The mean time between acetabular fracture and THA was 13.5 ± 14.9 years (0.2-53.5). Four subgroups were classified: subgroup I (nonsurgical, n = 15), subgroup II (complete removal of osteosynthesis, n = 8), subgroup III (partial removal of osteosynthesis, n = 15), and subgroup IV (remaining osteosynthesis, n = 29). Preoperative CRP blood levels were normal. CRP levels had no discriminatory ability to predict PJI (AUC: 0.43). Positive microbiological swabs were assessed in subgroups III (n = 1) and IV (n = 2). Complications during follow-up occurred in subgroups I (one aseptic loosening [6.7%]), III (one wound revision [6.7%], two low-grade infections [13.3%]), and IV (three low-grade infections [10.3%]). CONCLUSION: High infection rates were found in patients with THA after acetabular fracture with remaining implants or partial implant removal. Serum CRP alone seems to be a poor predictor. Therefore, an extensive diagnostic algorithm can help to detect an occult infection, including preoperative hip aspiration (microbiological samples and measurements of synovial CRP, WBC, and alpha-defensin levels). Intraoperative tissue samples and sonication results should be obtained during THA implantation.

Evaluation of modified and newly applied patella height indices in primary total knee arthroplasty.

OBJECTIVE: The aim of this radiological study was to compare several relevant modified and newly applied patella height indices (PHI) in navigated primary total knee arthroplasty (TKA) to determine intra- and interobserver reliability in order to give a recommendation for clinical application in measuring patella height (PH) in primary TKA. MATERIALS AND METHODS: A retrospective data analysis assessing different PHI (modified Insall-Salvati index (mISI), Caton-Deschamps index (mCDI), Blackburne-Peel index (mBPI), Plateau-Patella Angle (mPPA); Miura-Kawaramura index (MKI), Knee-Triangular index (KTI)) on lateral knee radiographs was performed by two blinded observers using the same software three months pre- and postoperatively. Concordance correlation coefficient and Pearson's correlation respectively were determined for intra- and interobserver rating as well as a categorization according to Landis and Koch and Cohen. RESULTS: A total of 337/291 patients of a 5-year period could be analyzed pre-/postoperatively. Excellent postoperative interrater results according to the categorization of Landis and Koch were achieved for the mBPI (Pearson 0.98) > mPPA (0.90) > KTI (0.86), good results for the MKI (0.79) and the mCDI (0.69), and moderate results for the mISI (0.52) with a predominantly strong Cohen correlation in almost all cases. Preoperatively, the mBPI and the KTI were the best interrated PHI. No PH changes could be found postoperatively for the mISI, KTI, MKI, and mPPA. CONCLUSION: The mBPI, the mPPA, and the KTI can be recommended for PH assessment in TKA. The mPPA might be the easiest one to use in a daily clinical set-up.

Hip Revision Arthroplasty of Periprosthetic Fractures Vancouver B2 and B3 with a Modular Revision Stem: Short-Term Results and Review of Literature.

BACKGROUND: Periprosthetic fractures Vancouver type B2/B3 after total hip arthroplasty (THA) is a challenging entity with increasing numbers. Limited data are available for this type of fracture treated with modular stems. Therefore, this study evaluated the outcome of Vancouver type B2/B3 fractures treated with a modular hip revision stem using a subproximal/distal anchorage and compared it to the current literature. MATERIALS AND METHODS: A consecutive series of periprosthetic Vancouver type B2/B3 fractures treated with a modular revision stem was retrospectively (2013 - 2016) evaluated. Assessment included the clinical (HHS, pain, ROM) as well as the radiological outcome (subsidence, loosening, facture healing). In adddition, the surgical technique is described in detail and results are compared with the current literature. RESULTS: A total of 18 patients (female/male 12/6) with Vancouver B2/B3 (n = 12/6) fractures with a mean age of 75.5 (60 - 89) years were included. The revision stem was inserted via a modified transgluteal approach (n = 16) or classical transfemoral approach (n = 2). The mean follow-up was 18.5 months, with a mean Harris Hip Score of 72.5 ± 18.7 (35.0 - 99.0) points. The fracture healing rate was 94.4% (n = 17) with osseous integration according to Engh in all cases. Dislocations of the greater trochanter were recorded in seven patients (38.9%). According to Beals and Towers, all results were rated excellent or good. No implant-related failure or relevant subsidence during this time was observed. Major complications were observed in five patients with two periprosthetic joint infections and two cases of major revision surgery. CONCLUSION: This study assessing Vancouver B2/3 fractures shows reproducible, good, short-term results in terms of subsidence and clinical functional outcome by the use of a modular revision stem. The transfemoral approach together with the modular stem allows for a stable fixation and good fracture healing. However, our data and review of the literature also documents the difficulties and higher complication rate associated with Vancouver B2/3 fractures.

Pronounced Heterotopic Ossifications after Traumatic Hamstring Rupture: Is an Ossification Prophylaxis Useful? / Ausgeprägte heterotope Ossifikationen nach traumatischer Ruptur der ischiokruralen Muskulatur: Ist eine Ossifikationsprophylaxe sinnvoll?

Hamstring injuries include a wide range of injuries and affect mainly athletes with high eccentric loads (football, athletics, rugby, climbing). According to the latest literature, unrecognized traumatic ruptures can cause permanent discomfort and may be associated with a poorer postoperative outcome when delayed surgical therapy is performed. Heterotopic ossifications (HO) after hamstring rupture have been described in individual case reports and smaller studies so far. Heterotopic ossifications are mainly known in hip surgery and elbow fractures. In this case report, a 48-year-old patient presented with an increasing swelling with hardening in the area of the right ischial tuberosity. One year before, an impact trauma was the reason for a traumatic hamstring rupture which was diagnosed with a delay. The HO was excised and the tendon refixed with two suture anchors. By limiting the range of motion with a hip-knee orthosis for 9 weeks, a regular postoperative healing process was observed. Heterotopic ossifications after hamstring ruptures have been reported repeatedly but have not been evaluated in any major study so far. It should therefore be considered whether prophylaxis with NSAIDs should be used for conservatively and surgically treated hamstring ruptures, analogous to the ossification prophylaxis for hip endoprostheses or fractures in the elbow region.

Increased tibial tubercle-trochlear groove and patellar height indicate a higher risk of recurrent patellar dislocation following medial reefing.

PURPOSE: Identifying anatomical risk factors on recurrent dislocation after medial reefing is important for deciding surgical treatment. The present study aimed to retrospectively analyze the preoperative magnetic resonance imaging (MRI)-based parameters of patients treated with medial reefing and whether these parameters lead to a higher risk of recurrent dislocation. METHODS: Fifty-five patients (18.6 ± 6.6 years) who underwent medial reefing after primary traumatic patellar dislocation (84% with medial patellofemoral ligament [MPFL] rupture) were included. Patients were followed up for at least 24 months postoperatively (3.8 ± 1.2 years) to assess the incidence of recurrent patellar dislocation. In patients without recurrent dislocation, the Kujala and subjective IKDC scores were assessed. Moreover, the tibial tubercle-trochlear groove (TT-TG), sulcus angle, patellar tilt, patellar shift, and lateral trochlea index (LTI) were measured. The patellar height was measured using the Caton-Dechamps (CDI), Blackburne-Peel (BPI), and Insall-Salvati index (ISI). The cohort was subclassified into two groups with and without recurrent dislocation. Differences between groups were analyzed with respect to the MRI parameters. RESULTS: Forty percent had a pathological sulcus angle of > 145°, 7.2% had an LTI of < 11°, 47.3% had a patellar tilt of > 20°, and 36.4% had a TT-TG of ≥ 16 mm. Increased patellar height was observed in 34.5, 65.5, and 34.5% of the patients as per CDI, BPI, and ISI, respectively. Nineteen (34.5%) patients suffered from recurrent dislocation. Compared with patients without recurrent dislocation, those with recurrent dislocation had a significantly lower LTI (p = 0.0467). All other parameters were not significantly different between the groups. Risk factor analysis showed higher odds ratios (OR > 2), although not statistically significant, for MPFL rupture (OR 2.05 [95% confidence interval 0.38-11.03], LTI (6.6 [0.6-68.1]), TT-TG (2.9 [0.9-9.2]), and patellar height according to ISI (2.3 [0.7-7.5]) and CDI (2.3 [0.7-7.5])). Patients without recurrent dislocation had a Kujala score of 93.7 ± 12.1 (42-100) points and an IKDC score of 90.6 ± 11.7 (55.2-100) points. CONCLUSION: Anatomical, MRI-based parameters should be considered before indicating medial reefing. A ruptured MPFL, an LTI < 11°, a TT-TG ≥ 16 mm, a patellar tilt > 20 mm, and an increased patellar height according to ISI and CDI were found to be associated, although not significantly, with a higher risk (OR > 2) of recurrent patellar dislocation after medial reefing. Thorough preoperative analysis is crucial to reduce the risk of recurrent dislocation in young patient cohorts. LEVEL OF EVIDENCE: Level IV.

Cortical bone thickness of the distal radius predicts the local bone mineral density.

AIMS: The distal radius is a major site of osteoporotic bone loss resulting in a high risk of fragility fracture. This study evaluated the capability of a cortical index (CI) at the distal radius to predict the local bone mineral density (BMD). METHODS: A total of 54 human cadaver forearms (ten singles, 22 pairs) (19 to 90 years) were systematically assessed by clinical radiograph (XR), dual-energy X-ray absorptiometry (DXA), CT, as well as high-resolution peripheral quantitative CT (HR-pQCT). Cortical bone thickness (CBT) of the distal radius was measured on XR and CT scans, and two cortical indices mean average (CBTavg) and gauge (CBTg) were determined. These cortical indices were compared to the BMD of the distal radius determined by DXA (areal BMD (aBMD)) and HR-pQCT (volumetric BMD (vBMD)). Pearson correlation coefficient (r) and intraclass correlation coefficient (ICC) were used to compare the results and degree of reliability. RESULTS: The CBT could accurately be determined on XRs and highly correlated to those determined on CT scans (r = 0.87 to 0.93). The CBTavg index of the XRs significantly correlated with the BMD measured by DXA (r = 0.78) and HR-pQCT (r = 0.63), as did the CBTg index with the DXA (r = 0.55) and HR-pQCT (r = 0.64) (all p < 0.001). A high correlation of the BMD and CBT was observed between paired specimens (r = 0.79 to 0.96). The intra- and inter-rater reliability was excellent (ICC 0.79 to 0.92). CONCLUSION: The cortical index (CBTavg) at the distal radius shows a close correlation to the local BMD. It thus can serve as an initial screening tool to estimate the local bone quality if quantitative BMD measurements are unavailable, and enhance decision-making in acute settings on fracture management or further osteoporosis screening. Cite this article: Bone Joint Res 2021;10(12):820-829.

3D computational anatomy of the scaphoid and its waist for use in fracture treatment.

BACKGROUND: A detailed understanding of scaphoid anatomy helps anatomic fracture reduction, and optimal screw position. Therefore, we analysed (1) the size and shape variations of the cartilage and osseous surface, (2) the distribution of volumetric bone mineral density (vBMD) and (3) if the vBMD values differ between a peripheral and a central screw pathway? METHODS: Forty-three fresh frozen hand specimens (17 females, 26 males) were analysed with high-resolution peripheral quantitative computed tomography (HR-pQCT) and dissected to compute a 3D-statistical osseous and cartilage surface model and a 3D-averaged vBMD model of the scaphoid. 3D patterns were analysed using principal component analysis (PCA). vBMD was analysed via averaging HR-pQCT grey values and virtual bone probing along a central and peripheral pathway. RESULTS: (1) PCA displayed most notable variation in length ranging from 1.7 cm (- 2SD) to 2.6 cm (mean) and 3.7 cm (+ 2SD) associated with differences of the width and configuration of the dorsal surface (curved and narrow (4 mm) to a wider width (9 mm)). (2) High vBMD was located in the peripheral zone. Lowest vBMD was observed in the centre and waist. (3) Virtual probing along a peripheral pathway near to the cartilage surfaces for the capitate and lunate allowed the center region to be bypassed, resulting in increased vBMD compared to a central pathway. CONCLUSION: High anatomical variations regarding the osseous and cartilage surfaces were associated with three distinct concentrically arranged zones with notable different vBMD. The complex scaphoid anatomy with its waist might alter the strategy of fracture fixation, education and research.

Patella-height analysis and correlation with clinical outcome after primary total knee arthroplasty.

BACKGROUND: It is the aim of this study to conceptualize a scheme for patellar-height analysis suitable for knees without and with implanted endoprosthesis. Furthermore, patellar-height and change of patellar-height by total-knee-arthroplasty (TKA) should be studied and correlated with clinical outcomes. We hypothesize that not only True-Patella-Infera (TPI) but also Pseudo-Patella-Infera (PPI) might be correlated with elevated anterior-knee-pain and reduced range-of-motion. METHODS: Several patellar-height indices were measured by three independent raters in two passes. Indices were analyzed and intra- and interobserver agreements were determined. For radiographic and clinical evaluation of 92 knee arthroplasties, the Insall-Salvati Index (ISI) and the Caton-Deschamps Index (CDI) were used to determine patellar-height and especially the amounts of TPI and PPI. Patellar-height was correlated with clinical outcome parameters: pain, ROM, Oxford Knee Score, Knee Society Score, Kujala Score, SF-36, Tegner and Lysholm. RESULTS: All used patellar-height indices demonstrated good intra- and interobserver agreement. Low preoperative ROM was correlated with low postoperative ROM after primary TKA. Postoperatively, 2.2% of the patients had a TPI and 9.8% had a PPI. Patella infera was not correlated with reduced subjective or objective clinical outcome parameters. CONCLUSIONS: Preoperative ROM is a good predictor of postoperative ROM after primary TKA. Patellar-height analysis can be sufficiently performed using the ISI and the CDI, respectively the derived CDI (dCDI) in cases with implanted endoprosthesis. As an alternative to the CDI/dCDI, the BPI/mBPI can be used. There seems to be a certain threshold of acceptable patellar-height reduction, in which clinical outcome is not deteriorated.

Cortical bone thickness predicts the quantitative bone mineral density of the proximal humerus.

Cortical thickness determined at the humerus can serve as an easy and reliable screening tool to predict the local bone status when quantitative bone mineral density (BMD) measurements are not available. It can therefore serve as a rapid screening tool in fragility fractures to identify patients requiring further diagnostic or osteoporosis treatment. INTRODUCTION: Quantitative bone mineral density (BMD) of the humerus is difficult to determine but relevant for osteoporosis and fracture treatment. Dual-energy X-ray absorptiometry (DXA) of the femur and lumbar spine overestimates the humeral BMD and is not ubiquitously available. Therefore, this study evaluated whether the cortical bone thickness (CBT) of the humerus or DXA of the forearm is able to predict humeral BMD. METHODS: Humeral BMD of 54 upper cadaver extremities (22 pairs, 10 single) (19-90 years) was determined by high-resolution peripheral-quantitative-computed-tomography (HR-pQCT) (volumetric BMD (vBMD)) and DXA (areal BMD (aBMD)) of the proximal humerus and distal forearm. Average and gauge cortical bone thickness (CBTavg/ CBTg) of the humeral diaphysis was determined from standard radiographs (XR) and computed-tomography (CT) and compared to the humeral BMD. Pearson (r) and intraclass-correlation-coefficients (ICC) were used to compare results and rater-reliability. RESULTS: CBTavg from XR strongly correlated with the humeral BMD (r = 0.78 aBMD (DXA) and r = 0.64 vBMD (HR-pQCT) (p < 0.0001)). The CBTg revealed a weaker correlation (r = 0.57 aBMD and r = 0.43 vBMD). CBT derived from XR strongly correlated to those from the CT (r = 0.82-0.90) and showed an excellent intra- and inter-rater correlation (ICC 0.79-0.92). Distal forearm aBMD correlated well with the humeral aBMD (DXA) (r = 0.77) and paired specimens highly correlated to the contralateral side (humerus r = 0.89, radius r = 0.97). CONCLUSIONS: The CBTavg can reliably be determined from standard radiographs and allows a good prediction of quantitative humeral bone mineral density (aBMD or vBMD) if measurements are not available. Furthermore, the distal forearm or the contralateral humerus can serve as a side to estimate the BMD if the ipsilateral side is impaired.

Reliability of a Caton-Deschamps-derived patella height index for knee arthroplasty.

PURPOSE: The original Caton-Deschamps index (oCDI) detects functional patella height. It cannot be used in knees with an implanted endoprosthesis. The "modified Caton-Deschamps index" (mCDI) for knee arthroplasty can miss pseudo-patella-infera (PPI), which is common after TKA. A derivate of the oCDI could be a simple analogue to the index published in 1982 using a modified tibial reference point at the anterior proximal point of the inlay, which can indirectly be located on the lateral knee radiograph. It was the aim of this study to determine the intra- and inter-rater agreement of a derived Caton-Deschamps index (dCDI) for knee arthroplasty. We hypothesized that the derived Caton-Deschamps index (dCDI) is a reliable radiological measure for patella height in knee arthroplasty. METHODS: Several patella height indices were measured by three independent raters in two passes. The second pass was performed after 6 weeks in random order. Intra- and inter-observer agreements were determined and analyzed using the intraclass correlation coefficient (ICC). For radiographic evaluation, digital lateral radiographs of 150 knees before and after primary TKA were used. RESULTS: We found high interrater reliability for all analyzed indices. We found the highest agreements for the ISI preop (ICC = 0.914) and postop (ICC = 0.920), respectively. We also found very good intra-rater reliability for the CDI (ICCpreop = 0.954), dCDI (ICCpostop = 0.945), ISI (ICCpreop = 0.960; ICCpostop=0.940) and BPI (ICCpreop = 0.969; ICCpostop = 0.955). Fourteen cases (9.3%) with insignificant PPI were found. CONCLUSION: The derived Caton-Deschamps index (dCDI) can easily be used in knee arthroplasty and demonstrated high intra- and interrater agreement, which was similar to other commonly used and established patella height indices.

Asymptomatic and Unnoticed Intra-articular Screw Over 18 Years after Fracture of the Posterior Wall of the Acetabulum - a Question of Stability? / Asymptomatische und unbemerkte intraartikuläre Schraubenlage über 18 Jahre nach Wandfraktur des hinteren Azetabulums ­ eine Frage der Stabilität?

Fractures of the posterior wall of the acetabulum occur in a frequency of 25 - 30%. Multifragmentary fractures involving 40 - 50% of the acetabular surface, the quality of reduction as well as involvement of cartilage and acetabular labrum are considered to have an impact on the development of a reduced posterior stability of the hip joint. This results in a shift of the main weight bearing area with development of a posttraumatic osteoarthritis. In the presented case, a 42-year old male patient was operated on 18 years ago due to a posterior acetabular wall fracture. Retrospectively, one of the screws was located partially intraarticular. However, the patient was asymptomatic over the 18-year period. The first consultation was due to unspecific symptoms of osteoarthritis of the right hip joint especially during flexion and external rotation. Due to only mild radiological signs of osteoarthritis, we indicated only the removal of the intraarticular screw. The symptoms postoperatively switched to a feeling of instability, so a total hip arthroplasty was performed. Since the operation, the patient is asymptomatic regarding the hip joint. The intraarticular screw seemed to stabilize the hip joint. This case demonstrates the importance of a good posterior guidance for the stability of the hip joint on one hand. On the other hand, it demonstrates the minor stress load of the posterior acetabular region, especially after fracture of the posterior wall. Therefore, a good posterior guidance should be one major aim of treatment of posterior acetabular wall fractures.

Cortical parameters predict bone strength at the tibial diaphysis, but are underestimated by HR-pQCT and µCT compared to histomorphometry.

Cortical bone and its microstructure are crucial for bone strength, especially at the long bone diaphysis. However, it is still not well-defined how imaging procedures can be used as predictive tools for mechanical bone properties. This study evaluated the capability of several high-resolution imaging techniques to capture cortical bone morphology and assessed the correlation with the bone's mechanical properties. The microstructural properties (cortical thickness [Ct.Th], porosity [Ct.Po], area [Ct.Ar]) of 11 female tibial diaphysis (40-90 years) were evaluated by dual-energy X-ray absorptiometry (DXA), high-resolution peripheral-quantitative-computed-tomography (HR-pQCT), micro-CT (µCT) and histomorphometry. Stiffness and maximal torque to failure were determined by mechanical testing. T-Scores determined by DXA ranged from 0.6 to -5.6 and a lower T-Score was associated with a decrease in Ct.Th (p ≤ 0.001) while the Ct.Po (p ≤ 0.007) increased, and this relationship was independent of the imaging method. With decreasing T-Score, histology showed an increase in Ct.Po from the endosteal to the periosteal side (p = 0.001) and an exponential increase in the ratio of osteons at rest to those after remodelling. However, compared to histomorphometry, HR-pQCT and µCT underestimated Ct.Po and Ct.Th. A lower T-Score was also associated with significantly reduced stiffness (p = 0.031) and maximal torque (p = 0.006). Improving the accuracy of Ct.Po and Ct.Th did not improve prediction of the mechanical properties, which was most closely related to geometry (Ct.Ar). The ex-vivo evaluation of mechanical properties correlated with all imaging modalities, with Ct.Th and Ct.Po highly correlated with the T-Score of the tibial diaphysis. Cortical microstructural changes were underestimated with the lower resolution of HR-pQCT and µCT compared to the histological 'gold standard'. The increased accuracy did not result in an improved prediction for local bone strength in this study, which however might be related to the limited number of specimens and thus needs to be evaluated in a larger collective.

Metaphyseal anchoring short stem hip arthroplasty provides a more physiological load transfer: a comparative finite element analysis study.

BACKGROUND: Short stem total hip arthroplasty (SHA) preserves femoral bone stock and is supposed to provide a more natural load transfer compared to standard stem total hip arthroplasty (THA). As comparative biomechanical reference data are rare we used a finite element analysis (FEA) approach to compare cortical load transfer after implantations of a metaphyseal anchoring short and standard stem in native biomechanical femora. METHODS: The subject specific finite element models of biomechanical femora, one native and two with implanted metaphyseal anchoring SHA (Metha, B. Braun Aesculap) and standard THA (CLS, Zimmer-Biomet), were generated from computed tomography datasets. The loading configuration was performed with an axial force of 1400 N. Von Mises stress was used to investigate the change of cortical stress distribution. RESULTS: Compared to the native femur, a considerable reduction of cortical stress was recorded after implantation of SHA and standard THA. The SHA showed less reduction proximally with a significant higher metaphyseal cortical stress compared to standard THA. Moreover, the highest peak stresses were observed metaphyseal for the SHA stem while for the standard THA high stress pattern was observed more distally. CONCLUSIONS: Both, short and standard THA, cause unloading of the proximal femur. However, the metaphyseal anchoring SHA features a clearly favorable pattern in terms of a lower reduction proximally and improved metaphyseal loading, while standard THA shows a higher proximal unloading and more distal load transfer. These load patterns implicate a reduced stress shielding proximally for metaphyseal anchoring SHA stems and might be able to translate in a better bone preservation.

Influence of different anteversion alignments of a cementless hip stem on primary stability and strain distribution.

BACKGROUND: Stem anteversion in total hip arthroplasty is well known to have a high impact on dislocation, but empirical data regarding the clinical and biomechanical influence is lacking. Therefore, we evaluated the impact of different anteversion alignments on the primary stability and strain distribution of a cementless stem. METHODS: The cementless CLS Spotorno stem was implanted in 3 different groups (each group n = 6, total n = 21) with different anteversion alignments: reference anteversion (8°), +15° torsion in anteversion (+23°), -15° torsion in retroversion (-7°) using composite femurs (Sawbones). Primary stability was determined by 3-dimensional micromotions using a dynamic loading procedure simulating walking on level ground. Additionally, surface strains were registered before and after stem insertion in the 3 different groups, using one composite femur for each group (total n = 3). FINDINGS: The micromotion measurements did not show a significant difference between the 3 evaluated alignments. Moreover, determination of the strain distribution did also not reveal an obvious difference. INTERPRETATION: This biomechanical study simulating walking on level ground indicates that there is no considerable influence of stem ante-/retroversion variation (±15°) on the initial stability and strain distribution when evaluating the cementless CLS Spotorno in composite femora.

Impact of tibial baseplate malposition on kinematics, contact forces and ligament tensions in TKA: A numerical analysis.

PURPOSE: Malposition of implant components in total knee arthroplasty (TKA) has consequences on tibiofemoral kinematics, contact forces and ligament tensions. To evaluate the impact of tibial baseplate malpositioning in the same knee, we conducted a computer simulation. METHODS: An established weight-bearing finite element model of a fixed bearing TKA was used for the computer simulation. To evaluate the influence of tibial baseplate malposition, calculations were consecutively performed in neutral position, at 3° and 6° of internal and external rotation and at 3 mm and 6 mm of medial and lateral translation. RESULTS: The highest effect of malposition was observed for ligament tensions, with a tendency of a greater influence for the 6 mm translation compared to 6° of rotation. Changes in contact forces and tibiofemoral kinematics were according to the alterations of ligament tensions. The highest ligament tension, contact force and femoral roll-back were registered for 6 mm medialization of the tibial baseplate. DISCUSSION: Tibial baseplate malposition effects ligament tensions, tibiofemoral contact forces and kinematics and has a risk of unfavorable clinical results due to postoperative pain, reduced range of motion, instability and a higher rate of early loosening. Therefore, surgeons should aim for a neutral position of the tibial baseplate.

Optimisation of the drill-in behaviour of the EcoFit® SC threaded cup.

Threaded cups show good clinical results when implanted correctly. In clinical use, multiple cases with an incomplete placement of the EcoFit threaded cup (implantcast) were observed. This behaviour could not be explained intra- and postoperatively. The aim of this study was to compare and optimise the drill-in-behaviour of the EcoFit cup in a biomechanical investigation. EcoFit cup sizes 46, 50 and 54 mm were compared with the SC cup (Aesculap) size 50 mm. Foam blocks (Sawbones) of density 0.16 g/ml (pcf 10), 0.32 g/ml (pcf 20) and 0.48 g/ml (pcf 30) were used. After standardised placement using a universal testing system (n = 8 per group), the primary stability, the overhang of the cups and the drill-in behaviour were measured. Overreamings of 1 and 2 mm were performed (pcf 20, n = 8) for the EcoFit cup size 50 and the primary stability as well as the overhang measurements were examined. Measurements of the cup diameter, thread depth and thread pitch were performed on three-dimensional (3D) images of the cup size 50 mm. The drill-in behaviour was different between the EcoFit and the SC cups. Even with maximum torque, the EcoFit cup could not be positioned as deep as the SC cup in standard reaming conditions (overhang of 1.1 ± 0.4 mm for the EcoFit size 50 in pcf 20 and of -0.01 ± 0.2 mm for the SC cup). The primary stability was lower for the EcoFit cup in comparison to the SC cup (128.8 ± 3.2 Nm vs. 138.6 ± 9.1 Nm, p = 0.0291). With overreaming to 51 mm, a deeper positioning of the EcoFit was possible (overlap of -0.3 ± 0.1, comparable to the SC cup). The overreaming of the cavity also led to a significantly higher primary stability of 143.4 ± 3.7 Nm (p < 0.001) comparable to the unaltered condition (128.8 ± 3.2 Nm). Overreaming to 52 mm had no further advantage in terms of primary stability or overhang. The geometric measurements showed significant differences as well. The previously clinically observed difficulties in inserting the cup were confirmed by this study. By overreaming to 51 mm, the drill-in behaviour, the primary stability and the measured overhang were comparable to the reference cup. The obtained results suggest that the extension of the acetabulum cavity to 51 mm while using the implantcast EcoFit size 50 should be implemented in clinical applications.