What holds paper together: nanometre scale exploration of bonding between paper fibres.

Paper, a man-made material that has been used for hundreds of years, is a network of natural cellulosic fibres. To a large extent, it is the strength of bonding between these individual fibres that controls the strength of paper. Using atomic force microscopy, we explore here the mechanical properties of individual fibre-fibre bonds on the nanometre scale. A single fibre-fibre bond is loaded with a calibrated cantilever statically and dynamically until the bond breaks. Besides the calculation of the total energy input, time dependent processes such as creep and relaxation are studied. Through the nanometre scale investigation of the formerly bonded area, we show that fibrils or fibril bundles play a crucial role in fibre-fibre bonding because they act as bridging elements. With this knowledge, new fabrication routes can be deduced to increase the strength of an ancient product that is in fact an overlooked high-tech material.

Adhesion of cellulose fibers in paper.

The surface topography of paper fibers is studied using atomic force microscopy (AFM), and thus the surface roughness power spectrum is obtained. Using AFM we have performed indentation experiments and measured the effective elastic modulus and the penetration hardness as a function of humidity. The influence of water capillary adhesion on the fiber-fiber binding strength is studied. Cellulose fibers can absorb a significant amount of water, resulting in swelling and a strong reduction in the elastic modulus and the penetration hardness. This will lead to closer contact between the fibers during the drying process (the capillary bridges pull the fibers into closer contact without storing up a lot of elastic energy at the contacting interface). In order for the contact to remain good in the dry state, plastic flow must occur (in the wet state) so that the dry surface profiles conform to each other (forming a key-and-lock type of contact).

Joint strength measurements of individual fiber-fiber bonds: an atomic force microscopy based method.

We are introducing a method to measure tensile strength of individual fiber-fiber bonds within a breaking force range of 0.01 mN-1 mN as well as the energy consumed during breaking. Until now, such a method was not available. Using a conventional atomic force microscope and a specifically designed sample holder, the desired force and the breaking behavior can be analyzed by two different approaches. First, dynamic loading can be applied, where force-versus-distance curves are employed to determine the proportions of elastic energy and energy dissipated in the bond. Second, static loading is utilized to study viscoelastic behavior and calculate viscoelastic energy contributions. To demonstrate the capability of the proposed method, we are presenting results for breaking strength of kraft pulp fiber-fiber bonds in tensile opening mode. The procedure is by no means restricted to cellulose fibers, it has the potential to quantify joint strength of micrometer-sized fibers in general.