Ambient pressure x-ray photoelectron spectroscopy setup for synchrotron-based in situ and operando atomic layer deposition research.

An ambient pressure cell is described for conducting synchrotron-based x-ray photoelectron spectroscopy (XPS) measurements during atomic layer deposition (ALD) processes. The instrument is capable of true in situ and operando experiments in which it is possible to directly obtain elemental and chemical information from the sample surface using XPS as the deposition process is ongoing. The setup is based on the ambient pressure XPS technique, in which sample environments with high pressure (several mbar) can be created without compromising the ultrahigh vacuum requirements needed for the operation of the spectrometer and the synchrotron beamline. The setup is intended for chemical characterization of the surface intermediates during the initial stages of the deposition processes. The SPECIES beamline and the ALD cell provide a unique experimental platform for obtaining new information on the surface chemistry during ALD half-cycles at high temporal resolution. Such information is valuable for understanding the ALD reaction mechanisms and crucial in further developing and improving ALD processes. We demonstrate the capabilities of the setup by studying the deposition of TiO2 on a SiO2 surface by using titanium(IV) tetraisopropoxide and water as precursors. Multiple core levels and the valence band of the substrate surface were followed during the film deposition using ambient pressure XPS.

Ambient pressure phase transitions over Ir(1 1 1): at the onset of CO oxidation.

In this study we report on the adsorbate structures on an Ir(1 1 1) surface during the phase transition from the inactive to the active state during CO oxidation. The CO oxidation over Pt(1 1 1) is used as a reference case. Where Pt(1 1 1) either is inactive and CO covered or active and O covered, Ir(1 1 1) exhibits a transition state with co-existing chemisorbed O and CO. The observed structural differences are explained in terms of DFT-calculated adsorption energies. For Pt(1 1 1) the repulsive CO-O interaction makes co-existing chemisorbed CO and O unfavourable, while for Ir(1 1 1) the stronger O and CO adsorption allows for overcoming the repulsive interaction. At the onset of CO oxidation over Ir(1 1 1), a CO structure containing defects forms, which enables O2 to dissociatively adsorb on the Ir(1 1 1) surface, thus enabling the CO oxidation reaction. At the mass transfer limit, the Ir(1 1 1) surface is covered by a chemisorbed O structure with defects; hence, the active surface is predominately chemisorbed O covered at a total pressure of 0.5 mbar and no oxide formation is observed.

Sonogashira cross-coupling over Au(1 1 1): from UHV to ambient pressure.

We have studied the reaction of phenylacetylene (PA) with chloro-, bromo-, and iodobenzene on the Au(1 1 1) surface as a model system for the gold-catalysed Sonogashira cross-coupling. Both ultrahigh vacuum-based and ambient pressure x-ray photoelectron spectroscopy show that iodo- and chlorobenzene (IB and CB) undergo the cross-coupling reaction towards diphenylacetylene. Bromobenzene (BB), in contrast, does not react in the UHV experiments. Further, at ambient pressure signs are found for poisoning of the Au(1 1 1) surface by a carbon species formed in the reaction. The understanding obtained in the reaction experiments are based on a thorough investigation of the adsorption of PA, IB, CB, and BB on the Au(1 1 1) surface by soft x-ray absorption spectroscopy and temperature-dependent x-ray photoelectron spectroscopy. In particular, the experiments provide the orientation of the intact adsorbates with respect to the surfaces at liquid nitrogen temperature. Dissociation in the temperature regime between -80 and -15 °C is observed for iodo- and chlorobenzene, but not for BB, in agreement with that only IB and CB, but not BB, react with PA to form diphenylacetylene. The difference is tentatively attributed to a difference in surface orientation of the different halobenzenes.

Tuning the spin state of iron phthalocyanine by ligand adsorption.

The future use of single-molecule magnets in applications will require the ability to control and manipulate the spin state and magnetization of the magnets by external means. There are different approaches to this control, one being the modification of the magnets by adsorption of small ligand molecules. In this paper we use iron phthalocyanine supported by an Au(111) surface as a model compound and demonstrate, using x-ray photoelectron spectroscopy and density functional theory, that the spin state of the molecule can be tuned to different values (S ∼ 0, [Formula: see text], 1) by adsorption of ammonia, pyridine, carbon monoxide or nitric oxide on the iron ion. The interaction also leads to electronic decoupling of the iron phthalocyanine from the Au(111) support.

Dissociation of water on oxygen-covered Rh{111}.

The adsorption of water and coadsorption with oxygen on Rh{111} under ultrahigh vacuum conditions was studied using synchrotron-based photoemission and photoabsorption spectroscopy. Water adsorbs intact on the clean surface at temperatures below 154 K. Irradiation with x-rays, however, induces fast dissociation and the formation of a mixed OH+H(2)O layer indicating that the partially dissociated layer is thermodynamically more stable. Coadsorption of water and oxygen at a coverage below 0.3 monolayers has a similar effect, leading to the formation of a hydrogen-bonded network of water and hydroxyl molecules at a ratio of 3:2. The partially dissociated layers are more stable than chemisorbed intact water with the maximum desorption temperatures up to 30 K higher. For higher oxygen coverage, up to 0.5 monolayers, water does not dissociate and an intact water species is observed above 160 K, which is characterized by an O 1s binding energy 0.6 eV higher than that of chemisorbed water and a high desorption temperature similar to the partially dissociated layer. The extra stabilization is most likely due to hydrogen bonds with atomic oxygen.

Extended one-dimensional supramolecular assembly on a stepped surface.

2,6-naphthalene-dicarboxylic acid was adsorbed on a Ag110 surface with an average terrace width of only some tens of a nm. Scanning tunneling microscopy shows that the adsorbates self-assemble into one-dimensional mesoscale length chains. These extend over several hundred nanometers and thus the structure exhibits an unprecedented tolerance to monatomic surface steps. Density functional theory and x-ray photoelectron spectroscopy explain the behavior by a strong intermolecular hydrogen bond plus a distinct template-mediated directionality and a high degree of molecular backbone flexibility.

Revisiting the structure of the p(4 x 4) surface oxide on Ag(111).

Scanning tunneling microscopy (STM) and density-functional theory are used to reexamine the structure of the renowned p(4 x 4)-O/Ag(111) surface oxide. The accepted structural model [C. I. Carlisle, Phys. Rev. Lett. 84, 3899 (2000)10.1103/PhysRevLett.84.3899] is incompatible with the enhanced resolution of the current STM measurements. An "Ag6 model" is proposed that is more stable than its predecessor and accounts for the coexistence of the p(4 x 4) and a novel c(3 x 5log3)rect phase. This coexistence is an indication of the dynamic complexity of the system that until now has not been appreciated.