Classification images for aerial images capture visual expertise for binocular disparity and a prior for lighting from above.

Using a novel approach to classification images (CIs), we investigated the visual expertise of surveyors for luminance and binocular disparity cues simultaneously after screening for stereoacuity. Stereoscopic aerial images of hedges and ditches were classified in 10,000 trials by six trained remote sensing surveyors and six novices. Images were heavily masked with luminance and disparity noise simultaneously. Hedge and ditch images had reversed disparity on around half the trials meaning hedges became ditch-like and vice versa. The hedge and ditch images were also flipped vertically on around half the trials, changing the direction of the light source and completing a 2 × 2 × 2 stimulus design. CIs were generated by accumulating the noise textures associated with "hedge" and "ditch" classifications, respectively, and subtracting one from the other. Typical CIs had a central peak with one or two negative side-lobes. We found clear differences in the amplitudes and shapes of perceptual templates across groups and noise-type, with experts prioritizing binocular disparity and using this more effectively. Contrariwise, novices used luminance cues more than experts meaning that task motivation alone could not explain group differences. Asymmetries in the luminance CIs revealed individual differences for lighting interpretation, with experts less prone to assume lighting from above, consistent with their training on aerial images of UK scenes lit by a southerly sun. Our results show that (i) dual noise in images can be used to produce simultaneous CI pairs, (ii) expertise for disparity cues does not depend on stereoacuity, (iii) CIs reveal the visual strategies developed by experts, (iv) top-down perceptual biases can be overcome with long-term learning effects, and (v) CIs have practical potential for directing visual training.

Five draft genome assemblies from Bacillaceae isolated from a degraded wetland environment.

We isolated five Bacillaceae from a degraded wetland environment and sequenced their genomes using Illumina NextSeq. Here, we report draft genome sequences of Bacillus velezensus-SC119, Priestia megaterium strain SC120, Bacillus zhangzhouensis strain SC123, Bacillus pumilis strain SC124, and Bacillus idriensis strain SC127. The genomes range between 3,657,353 and 5,772,725 bp with % GC between 37.62% and 46.38%.

Interactions between interfaces dictate stimuli-responsive emulsion behaviour.

Stimuli-responsive emulsions offer a dual advantage, combining long-term storage with controlled release triggered by external cues such as pH or temperature changes. This study establishes that thermo-responsive emulsion behaviour is primarily determined by interactions between, rather than within, interfaces. Consequently, the stability of these emulsions is intricately tied to the nature of the stabilizing microgel particles - whether they are more polymeric or colloidal, and the morphology they assume at the liquid interface. The colloidal properties of the microgels provide the foundation for the long-term stability of Pickering emulsions. However, limited deformability can lead to non-responsive emulsions. Conversely, the polymeric properties of the microgels enable them to spread and flatten at the liquid interface, enabling stimuli-responsive behaviour. Furthermore, microgels shared between two emulsion droplets in flocculated emulsions facilitate stimuli-responsiveness, regardless of their internal architecture. This underscores the pivotal role of microgel morphology and the forces they exert on liquid interfaces in the control and design of stimuli-responsive emulsions and interfaces.

What surprises the Mona Lisa? The relative importance of the eyes and eyebrows for detecting surprise in briefly presented face stimuli.

The classification image (CI) technique has been used to derive templates for judgements of facial emotion and reveal which facial features inform specific emotional judgements. For example, this method has been used to show that detecting an up- or down-turned mouth is a primary strategy for discriminating happy versus sad expressions. We explored the detection of surprise using CIs, expecting widened eyes, raised eyebrows, and open mouths to be dominant features. We briefly presented a photograph of a female face with a neutral expression embedded in random visual noise, which modulated the appearance of the face on a trial-by-trial basis. In separate sessions, we showed this face with or without eyebrows to test the importance of the raised eyebrow element of surprise. Noise samples were aggregated into CIs based on participant responses. Results show that the eye-region was most informative for detecting surprise. Unless attention was specifically directed to the mouth, we found no effects in the mouth region. The eye effect was stronger when the eyebrows were absent, but the eyebrow region was not itself informative and people did not infer eyebrows when they were missing. A follow-up study was conducted in which participants rated the emotional valence of the neutral images combined with their associated CIs. This verified that CIs for 'surprise' convey surprised expressions, while also showing that CIs for 'not surprise' convey disgust. We conclude that the eye-region is important for the detection of surprise.

Accuracy and Precision of a Novel Photogate System to Measure Toe Clearance on Stairs.

Background: Toe clearance on stairs is typically measured using optoelectronic systems, though these are often constrained to the laboratory, due to their complex setups. Here we measured stair toe clearance through a novel prototype photogate setup and compared this to optoelectronic measurements. Methods: Twelve participants (age 22 ± 3 years) completed 25 stair ascent trials, each on a seven-step staircase. Toe clearance over the fifth step edge was measured using Vicon and the photogates. Twenty-two photogates were created in rows through laser diodes and phototransistors. The height of the lowest photogate broken at step-edge crossing was used to determine photogate toe clearance. A limits of agreement analysis and Pearson's correlation coefficient compared the accuracy, precision and relationship between systems. Results: We found a mean difference of -1.5 mm (accuracy) between the two measurement systems, with upper and lower limits (precision) of 10.7 mm and -13.8 mm, respectively. A strong positive correlation was also found (r = 70, n = 12, p = 0.009) between the systems. Discussion: The results suggest that photogates could be an option for measuring real-world stair toe clearances, where optoelectronic systems are not routinely used. Improvements to the design and measurement factors may help to improve the precision of the photogates.

A novel method for identifying coded tags recorded on aquatic acoustic monitoring systems.

Aquatic biotelemetry increasingly relies on using acoustic transmitters ('tags') that enable passive detection of tagged animals using fixed or mobile receivers. Both tracking methods are resource-limited, restricting the spatial area in which movements of highly mobile animals can be measured using proprietary detection systems. Transmissions from tags are recorded by underwater noise monitoring systems designed for other purposes, such as cetacean monitoring devices, which have been widely deployed in the marine environment; however, no tools currently exist to decode these detections, and thus valuable additional information on animal movements may be missed. Here, we describe simple hybrid methods, with potentially wide application, for obtaining information from otherwise unused data sources. The methods were developed using data from moored, acoustic cetacean detectors (C-PODs) and towed passive receiver arrays, often deployed to monitor the vocalisations of cetaceans, but any similarly formatted data source could be used. The method was applied to decode tag detections that were found to have come from two highly mobile fish species, bass (Dicentrarchus labrax) and Twaite shad (Alosa fallax), that had been tagged in other studies. Decoding results were validated using test tags; range testing data were used to demonstrate the relative efficiency of these receiver methods in detecting tags. This approach broadens the range of equipment from which acoustic tag detections can be decoded. Novel detections derived from the method could add significant value to past and present tracking studies at little additional cost, by providing new insights into the movement of mobile animals at sea.

Second-order texture gratings produce overestimation of height in depictions of rectangles and steps.

The horizontal-vertical illusion (HVI) has been proposed as a method to increase the perceived height of steps, increase toe clearance and prevent falls. High contrast vertical stripes are placed on the step riser abutting a horizontal edge-highlighter creating 'T' junctions which are thought to promote the illusion. Various configurations of the HVI were tested including luminance gratings (L) and second-order modulations of contrast (CM), spatial frequency (FM) and orientation (OM). Observers were asked to compare the apparent height of gratings with that of either filled, unmodulated rectangles or unfilled rectangles. Rectangles were presented alone or as part of a step with a highlighter. In some conditions highlighters matched the properties of the grating; in others or not. In one critical experiment, the HVI was compared for steps with highlighters that were separated from the riser by a thin line and those where the risers and highlighters were continuous. All gratings except FM appeared taller when presented in the step configuration with a continuous, matching highlighter. This effect was greatly reduced when a thin line separated the grating from the highlighter and abolished for mis-matched highlighters and risers. In the rectangle conditions, all cues appeared taller than blank rectangles and L and CM appeared taller than filled-unmodulated rectangles. In conclusion, second-order cues may be useful for inducing the HVI onto steps. However, the ability of vertical stripes and edge-highlighters to accentuate perceived step height may be due to aggregation of the highlighter into the grating rather than the normal horizontal-vertical illusion.

Observing separate spin and charge Fermi seas in a strongly correlated one-dimensional conductor.

An electron is usually considered to have only one form of kinetic energy, but could it have more, for its spin and charge, by exciting other electrons? In one dimension (1D), the physics of interacting electrons is captured well at low energies by the Tomonaga-Luttinger model, yet little has been observed experimentally beyond this linear regime. Here, we report on measurements of many-body modes in 1D gated wires using tunneling spectroscopy. We observe two parabolic dispersions, indicative of separate Fermi seas at high energies, associated with spin and charge excitations, together with the emergence of two additional 1D "replica" modes that strengthen with decreasing wire length. The interaction strength is varied by changing the amount of 1D intersubband screening by more than 45%. Our findings not only demonstrate the existence of spin-charge separation in the whole energy band outside the low-energy limit of the Tomonaga-Luttinger model but also set a constraint on the validity of the newer nonlinear Tomonaga-Luttinger theory.

Versatile strategy for homogeneous drying patterns of dispersed particles.

After spilling coffee, a tell-tale stain is left by the drying droplet. This universal phenomenon, known as the coffee ring effect, is observed independent of the dispersed material. However, for many technological processes such as coating techniques and ink-jet printing a uniform particle deposition is required and the coffee ring effect is a major drawback. Here, we present a simple and versatile strategy to achieve homogeneous drying patterns using surface-modified particle dispersions. High-molecular weight surface-active polymers that physisorb onto the particle surfaces provide enhanced steric stabilization and prevent accumulation and pinning at the droplet edge. In addition, in the absence of free polymer in the dispersion, the surface modification strongly enhances the particle adsorption to the air/liquid interface, where they experience a thermal Marangoni backflow towards the apex of the drop, leading to uniform particle deposition after drying. The method is independent of particle shape and applicable to a variety of commercial pigment particles and different dispersion media, demonstrating the practicality of this work for everyday processes.

Using a stair horizontal-vertical illusion to increase foot clearance over an inconsistently taller stair-riser.

INTRODUCTION: Stair falls can be caused by inconsistent stair dimensions. During ascent, inconsistently taller stair risers lead to reduced foot clearances as the inconsistency goes unnoticed. A stair horizontal-vertical illusion increases perceived riser heights and foot clearance and could offset reduced foot clearances over inconsistently taller risers, though this might impact other stair safety measures. METHOD: Twelve participants (age: 22 (3) years) ascended a seven-step staircase under three conditions: i) all steps consistent in riser height (consistent), ii) a 1cm increase in step 5 riser height (inconsistent) and iii) a 1cm increase in step 5 riser height, superimposed with a stair horizontal-vertical illusion (illusion). Vertical foot clearance, foot overhang, and margins of stability were assessed over step 4, 5 and 6. Perceived riser height due to the illusion was determined through a computer perception test. A One-Way Repeated Measures ANOVA compared biomechanical variables between conditions. A One Sample t test compared perceived riser height to the true height. RESULTS: Over the inconsistent step 5, foot clearance reduced by 0.8cm compared to consistent. Illusion increased foot clearance by 1.1cm and decreased foot overhang by 4% compared to inconsistent. On step 4 the illusion led to more anterior instability compared to inconsistent. Illusion and inconsistent led to more mediolateral stability compared to consistent. The illusion increased perceived riser height by 12%. DISCUSSION: Foot clearance reductions over inconsistently taller risers can be offset by a stair horizontal-vertical illusion. Additional benefits included a safer foot overhang and unaffected stability over the inconsistent riser. Changes to step 4 stability might have resulted from leaning forward to look at the step 5 illusion. The stair horizontal-vertical illusion could be a practical solution for inconsistently taller stair risers, where a rebuild is usually the only solution.

Complex High-Internal Phase Emulsions that can Form Interfacial Films with Tunable Morphologies.

High-internal phase emulsions (HIPEs) were considered as an important functional material and have been the focus of intense development effort, but their fundamental attributes have hardly been altered at either the microcosmic or macroscopic level, which severely limits their practical applications in various areas. In this work, we report a general strategy for creating complex HIPEs that can form interfacial films at liquid interfaces. Double HIPEs and Janus HIPEs are both realized for the first time. They feature complex microscopic patterns with short-range anisotropy and exhibit non-Newtonian pseudoplastic flow behavior. By taking advantage of their response to a high-pH subphase, interfacial films can be successfully obtained, which are tunable in thickness and morphologies under compression. Complex HIPEs can greatly expand the applications of liquid materials, and the interfacial films of droplets represent an important step toward producing 2D soft materials with a unique functionality that can be broadly applied to biological processes.

The missing N1 or jittered P2: Electrophysiological correlates of pattern glare in the time and frequency domain.

Excessive sensitivity to certain visual stimuli (cortical hyperexcitability) is associated with a number of neurological disorders including migraine, epilepsy, multiple sclerosis, autism and possibly dyslexia. Others show disruptive sensitivity to visual stimuli with no other obvious pathology or symptom profile (visual stress) which can extend to discomfort and nausea. We used event-related potentials (ERPs) to explore the neural correlates of visual stress and headache proneness. We analysed ERPs in response to thick (0.37 cycles per degree [c/deg]), medium (3 c/deg) and thin (12 c/deg) gratings, using mass univariate analysis, considering three factors in the general population: headache proneness, visual stress and discomfort. We found relationships between ERP features and the headache and discomfort factors. Stimulus main effects were driven by the medium stimulus regardless of participant characteristics. Participants with high discomfort ratings had larger P1 components for the initial presentation of medium stimuli, suggesting initial cortical hyperexcitability that is later suppressed. The participants with high headache ratings showed atypical N1-P2 components for medium stripes relative to the other stimuli. This effect was present only after repeated stimulus presentation. These effects were also explored in the frequency domain, suggesting variations in intertrial theta band phase coherence. Our results suggest that discomfort and headache in response to striped stimuli are related to different neural processes; however, more exploration is needed to determine whether the results translate to a clinical migraine population.

Yielding and resolidification of colloidal gels under constant stress.

We examine the macroscopic deformation of a colloidal depletion gel subjected to a step shear stress. Three regimes are identified depending on the magnitude of the applied stress: (i) for stresses below yield stress, the gel undergoes a weak creep in which the bulk deformation grows sublinearly with time similar to crystalline and amorphous solids. For stresses above yield stress, when the bulk deformation exceeds approximately the attraction range, the sublinear increase of deformation turns into a superlinear growth which signals the onset of non-linear rearrangements and yielding of the gel. However, the long-time creep after such superlinear growth shows two distinct behaviors: (ii) under strong stresses, a viscous flow is reached in which the strain increases linearly with time. This indicates a complete yielding and flow of the gel. In stark contrast, (iii) for weak stresses, the gel after yielding starts to resolidify. More homogenous gels that are produced through enhancement of either interparticle attraction strength or strain amplitude of the oscillatory preshear, resolidify gradually. In contrast, in gels that are more heterogeneous resolidification occurs abruptly. We also find that heterogenous gels produced by oscillatory preshear at intermediate strain amplitude yield in a two-step process. Finally, the characteristic time for the onset of delayed yielding is found to follow a two-step decrease with increasing stress. This is comprised of an exponential decrease at low stresses, during which bond reformation is decisive and resolidification is detected, and a power law decrease at higher stresses where bond breaking and particle rearrangements dominate.

The next step in optimising the stair horizontal-vertical illusion: Does a perception-action link exist in older adults?

INTRODUCTION: Tripping on stairs results from insufficient foot to step edge clearance and can often lead to a fall in older adults. A stair horizontal-vertical illusion is suggested to increase the perceived riser height of a step and increase foot clearance when stepping up. However, this perception-action link has not been empirically determined in older adults. Previous findings suggesting a perception-action effect have also been limited to a single step or a three-step staircase. On larger staircases, somatosensory learning of step heights may be greater which could override the illusory effect on the top step. Furthermore, the striped nature of the existing stair horizontal-vertical illusion is associated with visual stress and may not be aesthetically suitable for use on public stairs. These issues need resolving before potential future implementation on public stairs. METHODS: Experiment 1. A series of four computer-based perception tests were conducted in older (N = 14: 70 ± 6 years) and young adults (N = 42: 24 ± 3 years) to test the influence of different illusion designs on stair riser height estimation. Participants compared images of stairs, with horizontal-vertical illusions or arbitrary designs on the bottom step, to a plain stair with different bottom step riser heights and selected the stair they perceived to have the tallest bottom riser. Horizontal-vertical illusions included a previously developed design and versions with modified spatial frequencies and mark space ratios. Perceived riser height differences were assessed between designs and between age groups. Experiment 2. To assess the perception-action link, sixteen older (70 ± 7 years) and fifteen young (24 ± 3 years) adults ascended a seven-step staircase with and without horizontal-vertical illusions tested in experiment 1 placed onto steps one and seven. Foot clearances were measured over each step. To determine whether changes in perception were linked to changes in foot clearance, perceived riser heights for each horizontal-vertical illusion were assessed using the perception test from experiment 1 before and after stair ascent. Additional measures to characterise stair safety included vertical foot clearance, margins of stability, foot overhang, stair speed, and gaze duration, which were assessed over all seven steps. RESULTS: Experiment 1. All horizontal-vertical illusion designs led to significant increases in the perceived riser height in both young and older adults (12-19% increase) with no differences between age groups. Experiment 2. On step 7, each horizontal-vertical illusion led to an increase in vertical foot clearance for young (up to 0.8 cm) and older adults (up to 2.1 cm). On step 1 significant increases in vertical foot clearance were found for a single horizontal-vertical illusion when compared to plain (1.19 cm increase). The horizontal-vertical illusions caused significant increases in the perceived riser height (young; 13% increase, older; 11% increase) with no differences between illusion design, group or before and after stair ascent. No further differences were found for the remaining variables and steps. CONCLUSION: Results indicate a perception-action link between perceived riser height and vertical foot clearance in response to modified versions of the horizontal-vertical illusion in both young and older adults. This was shown with no detriment to additional stair safety measures. Further evaluating these illusions on private/public stairs, especially those with inconsistently taller steps, may be beneficial to help improve stair safety for older adults.

Arabidopsis RING-type E3 ubiquitin ligase XBAT35.2 promotes proteasome-dependent degradation of ACD11 to attenuate abiotic stress tolerance.

Plants employ multiple mechanisms to cope with a constantly changing and challenging environment, including using the ubiquitin proteasome system (UPS) to alter their proteome to assist in initiating, modulating and terminating responses to stress. We previously reported that the ubiquitin ligase XBAT35.2 mediates the proteasome-dependent degradation of Accelerated Cell Death 11 (ACD11) to promote pathogen defense. Here, we demonstrate roles for XBAT35.2 and ACD11 in abiotic stress tolerance. As seen in response to pathogen infection, abiotic stress stabilizes XBAT35.2 and the abundance of ACD11 rose consistently with increasing concentrations of abscisic acid (ABA) and salt. Surprisingly, exposure to ABA and salt increased the stability of ACD11, and the overexpression of ACD11 improves plant survival of salt and drought stress, suggesting a role for ACD11 in promoting tolerance. Prolonged exposure to high concentrations of ABA or salt resulted in ubiquitination and the proteasome-dependent degradation of ACD11, however. The stress-induced turnover of ACD11 requires XBAT35.2, as degradation is slowed in the absence of the E3 ubiquitin ligase. Consistent with XBAT35.2 mediating the proteasome-dependent degradation of ACD11, the loss of E3 ubiquitin ligase function enhances the tolerance of salt and drought stress, whereas overexpression increases sensitivity. A model is presented where, upon the perception of abiotic stress, ACD11 abundance increases to promote tolerance. Meanwhile, XBAT35.2 accumulates and in turn promotes the degradation of ACD11 to attenuate the stress response. The results characterize XBAT35.2 as an E3 ubiquitin ligase with opposing roles in abiotic and biotic stress.

Precise Self-Positioning of Colloidal Particles on Liquid Emulsion Droplets.

Decorating emulsion droplets by particles stabilizes foodstuff and pharmaceuticals. Interfacial particles also influence aerosol formation, thus impacting atmospheric CO2 exchange. While studies of particles at disordered droplet interfaces abound in the literature, such studies for ubiquitous ordered interfaces are not available. Here, we report such an experimental study, showing that particles residing at crystalline interfaces of liquid droplets spontaneously self-position to specific surface locations, identified as structural topological defects in the crystalline surface monolayer. This monolayer forms at temperature T = Ts, leaving the droplet liquid and driving at Td < Ts a spontaneous shape-change transition of the droplet from spherical to icosahedral. The particle's surface position remains unchanged in the transition, demonstrating these positions to coincide with the vertices of the sphere-inscribed icosahedron. Upon further cooling, droplet shape-changes to other polyhedra occur, with the particles remaining invariably at the polyhedra's vertices. At still lower temperatures, the particles are spontaneously expelled from the droplets. Our results probe the molecular-scale elasticity of quasi-two-dimensional curved crystals, impacting also other fields, such as protein positioning on cell membranes, controlling essential biological functions. Using ligand-decorated particles, and the precise temperature-tunable surface position control found here, may also allow using these droplets for directed supra-droplet self-assembly into larger structures, with a possible post-assembly structure fixation by UV polymerization of the droplet's liquid.

Periodic buckling and grain boundary slips in a colloidal model of solid friction.

The intermittent 'stick-slip' dynamics in frictional sliding of solid bodies is common in everyday life and technology. This dynamics has been widely studied on a macroscopic scale, where the thermal motion can usually be neglected. However, the microscopic mechanisms behind the periodic stick-slip events are yet unclear. We employ confocal microscopy of colloidal spheres, to study the frictional dynamics at the boundary between two quasi-two-dimensional (2D) crystalline grains, with a single particle resolution. Such unprecedentedly-detailed observations of the microscopic-scale frictional solid-on-solid sliding have never been previously carried out. At this scale, the particles undergo an intense thermal motion, which masks the avalanche-like nature of the underlying frictional dynamics. We demonstrate that the underlying sliding dynamics involving out-of-plane buckling events, is intermittent and periodic, like in macroscopic friction. However, unlike in the common models of friction, the observed periodic frictional dynamics is promoted, rather than just suppressed, by the thermal noise, which maximizes the entropy of the system.

Particle-stabilized Janus emulsions that exhibit pH-tunable stability.

By developing a deeper understanding of the formation mechanism and the origin of the stability, we report a simple and large-scale fabrication approach to create Janus emulsions that can be controlled in size, geometry and stability.

Bacteria as living patchy colloids: Phenotypic heterogeneity in surface adhesion.

Understanding and controlling the surface adhesion of pathogenic bacteria is of urgent biomedical importance. However, many aspects of this process remain unclear (for example, microscopic details of the initial adhesion and possible variations between individual cells). Using a new high-throughput method, we identify and follow many single cells within a clonal population of Escherichia coli near a glass surface. We find strong phenotypic heterogeneities: A fraction of the cells remain in the free (planktonic) state, whereas others adhere with an adhesion strength that itself exhibits phenotypic heterogeneity. We explain our observations using a patchy colloid model; cells bind with localized, adhesive patches, and the strength of adhesion is determined by the number of patches: Nonadherers have no patches, weak adherers bind with a single patch only, and strong adherers bind via a single or multiple patches. We discuss possible implications of our results for controlling bacterial adhesion in biomedical and other applications.

Degradation of the stress-responsive enzyme formate dehydrogenase by the RING-type E3 ligase Keep on Going and the ubiquitin 26S proteasome system.

KEY MESSAGE: KEG is involved in mediating the proteasome-dependent degradation of FDH, a stress-responsive enzyme. The UPS may function to suppress FDH mediated stress responses under favorable growth conditions. Formate dehydrogenase (FDH) has been studied in bacteria and yeasts for the purpose of industrial application of NADH co-factor regeneration. In plants, FDH is regarded as a universal stress protein involved in responses to various abiotic and biotic stresses. Here we show that FDH abundance is regulated by the ubiquitin proteasome system (UPS). FDH is ubiquitinated in planta and degraded by the 26S proteasome. Interaction assays identified FDH as a potential substrate for the RING-type ubiquitin ligase Keep on Going (KEG). KEG is capable of attaching ubiquitin to FDH in in vitro assays and the turnover of FDH was increased when co-expressed with a functional KEG in planta, suggesting that KEG contributes to FDH degradation. Consistent with a role in regulating FDH abundance, transgenic plants overexpressing KEG were more sensitive to the inhibitory effects of formate. In addition, FDH is a phosphoprotein and dephosphorylation was found to increase the stability of FDH in degradation assays. Based on results from this and previous studies, we propose a model where KEG mediates the ubiquitination and subsequent degradation of phosphorylated FDH and, in response to unfavourable growth conditions, reduction in FDH phosphorylation levels may prohibit turnover allowing the stabilized FDH to facilitate stress responses.