Considerations in binding diblock copolymers on hydrophilic alginate beads for providing an immunoprotective membrane.

Alginate-based microcapsules are being proposed for treatment of many types of diseases. A major obstacle however in the successes is that these capsules are having large lab-to-lab variations. To make the process more reproducible, we propose to cover the surface of alginate capsules with diblock polymers that can form polymer brushes. In the present study, we describe the stepwise considerations for successful application of diblock copolymer of polyethylene glycol (PEG) and poly-L-lysine (PLL) on the surface of alginate beads. Special procedures had to be designed as alginate beads are hydrophilic and most protocols are designed for hydrophobic biomaterials. The successful attachment of diblock copolymer and the presence of PEG blocks on the surface of the capsules were studied by fluorescence microscopy. Longer time periods, that is, 30-60 min, are required to achieve saturation of the surface. The block lengths influenced the strength of the capsules. Shorter PLL blocks resulted in less stable capsules. Adequate permeability of the capsules was achieved with poly(ethylene glycol)-block-poly(L-lysine hydrochloride) (PEG454-b-PLL100) diblock copolymers. The capsules were a barrier for immunoglobulin G. The PEG454-b-PLL100 capsules have similar mechanical properties as PLL capsules. Minor immune activation of nuclear factor κB in THP-1 monocytes was observed with both PLL and PEG454-b-PLL100 capsules prepared from purified alginate. Our results show that we can successfully apply block copolymers on the surface of hydrophilic alginate beads without interfering with the physicochemical properties.

Microbial adhesion to surface-grafted polyacrylamide brushes after long-term exposure to PBS and reconstituted freeze-dried saliva.

Polyacrylamide (PAAm) brushes, covalently grafted from silicon wafer surfaces were examined for their ability to inhibit microbial adhesion after long-term exposure to PBS or reconstituted freeze-dried saliva for time intervals from 48 h up to 1 month at 37 degrees C. Microbial adhesion after exposure was studied in a parallel plate flow chamber. Infrared spectra showed that PAAm brushes exhibit good chemical stability upon incubation in both PBS and reconstituted freeze-dried saliva up to 1 month. Reductions in microbial adhesion on PAAm brushes after exposure to PBS or reconstituted freeze-dried saliva varied from 63 to 93% depending on the microbial strain considered, even after 1 month of exposure of the brushes to reconstituted freeze-dried saliva.

Annealing-induced changes in double-brush Langmuir-Blodgett films of alpha-helical diblock copolypeptides.

The effect of annealing on the structure and the helix orientation in Langmuir-Blodgett (LB) monolayers of diblock copolymers (PLGA-b-PMLGSLGs) of poly(alpha-L-glutamic acid) (PLGA) and poly(gamma-methyl-L-glutamate-ran-gamma-stearyl-L-glutamate) with 30 mol % of stearyl substituents (PMLGSLG) with unidirectional helix orientation deposited on hydrophilic silicon substrates was characterized by means of small-angle X-ray reflectivity, transmission Fourier transform infrared spectroscopy, and atomic force microscopy. Upon annealing at 100 degrees C for 24 h, the alpha-helices became less tilted toward the substrate surface normal. Surface area shrinkage accompanied the change in tilt, indicated by an increase in both film thickness and electron density, resulting in more compact and uniform films. The enhancement of the helix orientation by thermal annealing was greater for the PMLGSLG block and for the diblock copolymers with the shorter block lengths. For these diblock copolymers, annealing resulted in postorientation of the PMLGSLG block helices almost perpendicular to the substrate surface. This effect originates from a considerable increase in intermolecular packing of the PLGA block caused by hydrogen bonds between the carboxylic groups upon annealing, as well as the high mobility of the PMLGSLG block helices for rearrangement favored by the melted side chain mantle at elevated temperatures.

Dipping-induced azimuthal helix orientation in Langmuir-Blodgett monolayers of alpha-helical amphiphilic diblock copolypeptides.

The azimuthal helix orientation of the rigid-rod amphiphilic diblock copolypeptides (PLGA-b-PMLGSLGs) of poly(alpha-L-glutamic acid) (PLGA) and poly(gamma-methyl-L-glutamate-ran-gamma-stearyl-L-glutamate) with 30 mol % of stearyl substituents (PMLGSLG) in Langmuir-Blodgett (LB) monolayers was investigated using polarized transmission Fourier transform infrared spectroscopy. The relative position of dipping with respect to the previous transfer position can be used to manipulate the azimuthal orientation of the helices parallel to or tilted by an angle of 45 degrees with respect to the dipping direction in the transferred films. The study of the azimuthal order for the LB monolayers of PLGA-b-PMLGSLGs of various block lengths revealed that the observed effect arises mainly from the deformation of the PMLGSLG top brush layer, induced by the flow orientation around the transfer region. In those cases where the PMLGSLG block is tilted by a sufficiently large angle with respect to the surface normal, high azimuthal order parameters of 0.5-0.75 were obtained.

Solvent-free functionalization of silicone rubber and efficacy of PAAm brushes grafted from an amino-PPX layer against bacterial adhesion.

Silicone rubber is a frequently employed biomaterial that is prone to bacterial adhesion and biofilm formation. In this study, the surface of silicone rubber was solvent-free functionalized by chemical vapor deposition (CVD) of poly(o-amino-p-xylylene-co-p-xylylene (amino-PPX). Subsequently, the amino groups of the amino-PPX layer were used to introduce the initiator from a vapor phase for atom transfer radical polymerization of acrylamide to form polyacrylamide (PAAm) brushes. The modification steps were verified by means of X-ray photoelectron spectroscopy and attenuated total reflection-Fourier transform infrared spectroscopy. Adhesion of Staphylococcus aureus ATCC 12600 and Escherichia coli 3.14 to an amino-PPX-PAAm brush coating in a parallel plate flow chamber was strongly reduced with respect to non-coated silicone rubber - by 93% and 99%, respectively. For E. coli 3.14, this reduction is larger than that obtained for solvent functionalization of γ-aminopropyltriethoxysilane-PAAm brushes due to the higher density of amino groups introduced by the CVD of amino-PPX.

Surface potentials in Langmuir monolayers of unidirectionally oriented alpha-helical diblock copolypeptides.

The surface potentials and effective dipole moments of alpha-helical amphiphilic diblock copolypeptides during monolayer compression at the air-water interface are reported. Amphiphilic diblock copolypeptides (PLGA-b-PMLGSLGs) of poly(alpha-L-glutamic acid) (PLGA) and poly(gamma-methyl-L-glutamate-ran-gamma-stearyl-L-glutamate) with 30 mol % of stearyl substituents (PMLGSLG) of various block lengths were studied during the double-brush formation process at the water surface. Upon monolayer spreading of PLGA-b-PMLGSLGs, surface potentials of hundreds of millivolts were recorded, attributed to the dipole moments of water molecules reorienting due to interactions with the monolayers. Upon compression, the effective dipole moments derived from the surface potentials of the PLGA-b-PMLGSLG monolayers decrease gradually, most likely as a result of the immersion of the hydrophilic block in water and cancellation of the interactions between the hydrophobic block and the underlying water molecules. The polypeptide macrodipole moment immersed in water was apparently effectively screened out. The remaining effective dipole moment of the monolayer contributes mainly to the hydrophobic block, and upon tilting away from the water surface toward the surface normal, it was found to increase with the hydrophobic block length, indicating the gradual formation of unidirectional aligned polypeptide molecules in the double-brush monolayer.

Polyacrylamide brush coatings preventing microbial adhesion to silicone rubber.

Silicone rubber is a frequently used biomaterial in biomedical devices and implants, yet highly prone to microbial adhesion and the development of a biomaterial-centered infection. Effective coating of silicone rubber to discourage microbial adhesion has thus far been impossible due to the hydrophobic character of its surface, surface deterioration upon treatment and instability of coatings under physiological conditions. Here we present a method to successfully grow polyacrylamide (PAAm) brushes from silicone rubber surfaces after removal of low molecular weight organic molecules (LMWOM), such as silane oligomers. PAAm brush coating did not cause any surface deterioration and discouraged microbial adhesion, even after 1-month exposure to physiological fluids. The method presented opens many new avenues for the use of silicone rubber as a biomaterial, without the risk of developing a biomaterial-centered infection.

Reversible helix sense inversion in surface-grafted poly(beta-phenethyl-L-aspartate) films.

The reversible manipulation of the helix screw sense in surface-grafted poly(beta-phenethyl-L-aspartate) (PPELA) films by means of external stimuli was investigated. Ringopening polymerization of beta-phenethyl-L-aspartate N-carboxyanhydride initiated from primary amino-functionalized silicon and quartz substrates results in surface-grafted PPELA films in which the end-grafted polypeptide chains have a right-handed alpha-helical conformation. Upon annealing of the film at 150 degrees C for 30 min, a helix screw sense inversion takes place and the grafted chains adopt a left-handed pi-helical conformation. In the solid state, this left-handed pi-helical form is completely stable and cannot be changed by reheating and/or cooling. Upon immersion of the annealed grafted film in chloroform or other helicogenic solvents, the grafted polypeptide chains completely revert to their original right-handed alpha-helical form. Successive annealing and solvent treatment steps show that this helix sense inversion cycle can be repeated many times.

Cross-linking-induced permanently perpendicular helix orientation in surface-grafted polyglutamate films.

Using a chemical cross-linking procedure, surface-grafted polyglutamate films with a permanently perpendicular helix orientation were prepared. A surface-grafted alpha-helical polyglutamate film containing polymerizable side groups was synthesized by ring-opening terpolymerization of 50 molar% gamma-methyl-L-glutamate N-carboxyanhydride (NCA), 30% gamma-stearyl-L-glutamate NCA and 20% gamma-4-vinylbenzyl-L-glutamate NCA initiated from a silicon substrate functionalized with primary amino groups. The average tilt angle of the end-grafted helices in this film is approximately 66 degrees , indicating a nearly parallel helix orientation with respect to the substrate surface. After swelling of the grafted terpolyglutamate film in stearyl methacrylate and subsequent radical cross-linking, the average helix tilt angle decreases to about 11 degrees, indicating an almost perpendicular helix orientation. The film thickness increases accordingly from 151 A before to approximately 390 A after cross-linking. Extensive solvent treatment of the cross-linked film shows that the perpendicular helix orientation is permanent.

Synthesis and characterization of surface-grafted polyacrylamide brushes and their inhibition of microbial adhesion.

A method is presented to prevent microbial adhesion to solid surfaces exploiting the unique properties of polymer brushes. Polyacrylamide (PAAm) brushes were grown from silicon wafers by atom transfer radical polymerization (ATRP) using a three-step reaction procedure consisting of immobilization of a coupling agent gamma-aminopropyltriethoxysilane, anchoring of an ATRP initiator 4-(chloromethyl)benzoyl chloride, and controlled radical polymerization of acrylamide. The surfaces were characterized by X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, ellipsometry, and contact-angle measurements. The calculated grafting density pointed to the presence of a dense and homogeneous polymer brush. Initial deposition rates, adhesion after 4 h, and detachment of two bacterial strains (Staphylococcus aureus ATCC 12600 and Streptococcus salivarius GB 24/9) and one yeast strain (Candida albicans GB 1/2) to both PAAm-coated and untreated silicon surfaces were investigated in a parallel plate flow chamber. A high reduction (70-92%) in microbial adhesion to the surface-grafted PAAm brush was observed, as compared with untreated silicon surfaces. Application of the proposed grafting method to silicone rubbers may offer great potential to prevent biomaterials-centered infection of implants.