A low-energy set-up for gamma-ray spectrometry of NORM tailored to the needs of a secondary smelting facility.

A measurement station dedicated for quantitative radiological characterisation of naturally occurring radionuclides in a metallurgical company and based on gamma-ray spectrometry was developed. The station is intended for performing quality control of final non-ferrous metal products and for radiological checks of incoming materials. A low-background point-contact HPGe-detector was used and the signal was split in two branches to enable collecting simultaneously spectra with high amplification (for gamma-ray energies below 250keV) and low amplification.

The use of portable equipment for the activity concentration index determination of building materials: method validation and survey of building materials on the Belgian market.

The Euratom BSS requires that in the near future (2015) the building materials for application in dwellings or buildings such as offices or workshops are screened for NORM nuclides. The screening tool is the activity concentration index (ACI). Therefore it is expected that a large number of building materials will be screened for NORM and thus require ACI determination. Nowadays, the proposed standard for determination of building material ACI is a laboratory analyses technique with high purity germanium spectrometry and 21 days equilibrium delay. In this paper, the B-NORM method for determination of building material ACI is assessed as a faster method that can be performed on-site, alternative to the aforementioned standard method. The B-NORM method utilizes a LaBr3(Ce) scintillation probe to obtain the spectral data. Commercially available software was applied to comprehensively take into account the factors determining the counting efficiency. The ACI was determined by interpreting the gamma spectrum from (226)Ra and its progeny; (232)Th progeny and (40)K. In order to assess the accuracy of the B-NORM method, a large selection of samples was analyzed by a certified laboratory and the results were compared with the B-NORM results. The results obtained with the B-NORM method were in good correlation with the results obtained by the certified laboratory, indicating that the B-NORM method is an appropriate screening method to assess building material ACI. The B-NORM method was applied to analyze more than 120 building materials on the Belgian market. No building materials that exceed the proposed reference level of 1 mSv/year were encountered.

Implementation of alanine/EPR as transfer dosimetry system in a radiotherapy audit programme in Belgium.

A measurement procedure based on alanine/electron paramagnetic resonance (EPR) dosimetry was implemented successfully providing simple, stable, and accurate dose-to-water (D(w)) measurements. The correspondence between alanine and ionization chamber measurements in reference conditions was excellent. Alanine/EMR dosimetry might be a valuable alternative to thermoluminescent (TLD) and ionization chamber based measuring procedures in radiotherapy audits.

Dose reconstruction using mobile phones.

Electronic components inside mobile phones are regarded as useful tools for accident and retrospective dosimetry using optically stimulated luminescence (OSL) and thermoluminescence. Components inside the devices with suitable properties for luminescence dosimetry include, amongst others, ceramic substrates in resistors, capacitors, transistors and antenna switches. Checking the performance of such devices in dosimetric experiments is a crucial step towards developing a reliable dosimetry system for emergency situations using personal belongings. Here, the results of dose assessment experiments using irradiated mobile phones are reported. It will be shown that simple regenerative dose estimates, derived from various types of components removed from different mobile phone models, are consistent with the given dose, after applying an average fading correction factor.

Triplet states as non-radiative traps in multichromophoric entities: single molecule spectroscopy of an artificial and natural antenna system.

Energy transfer in antenna systems, ordered arrays of chromophores, is one of the key steps in the photosynthetic process. The photophysical processes taking place in such multichromophoric systems, even at the single molecule level, are complicated and not yet fully understood. Instead of directly studying individual antenna systems, we have chosen to focus first on systems for which the amount of chromophores and the interactions among the chromophores can be varied in a systematic way. Dendrimers with a controlled number of chromophores at the rim fulfill those requirements perfectly. A detailed photophysical study of a second-generation dendrimer, containing eight peryleneimide chromophores at the rim, was performed 'J. Am. Chem. Soc., 122 (2000) 9278'. One of the most intriguing findings was the presence of collective on/off jumps in the fluorescence intensity traces of the dendrimers. This phenomenon can be explained by assuming a simultaneous presence of both a radiative trap (energetically lowest chromophoric site) and a non-radiative trap (triplet state of one chromophore) within one individual dendrimer. It was shown that an analogue scheme could explain the collective on/off jumps in the fluorescence intensity traces of the photosynthetic pigment B-phycoerythrin (B-PE) (Porphyridium cruentum). The different values of the triplet lifetime that could be recovered for a fluorescence intensity trace of B-PE were correlated with different intensity levels in the trace, suggesting different chromophores acting as a trap as function of time.