Infrared Spectroscopy of Bilberry Extract Water-in-Oil Emulsions: Sensing the Water-Oil Interface.

Water-in-oil (w/o) emulsions are of great interest in many areas of the life sciences, including food technology, bioprocess engineering, and pharmaceuticals. Such emulsions are complex multi-component systems and the molecular mechanisms which lead to a stable emulsion are yet to be fully understood. In this work, attenuated total reflection (ATR) infrared (IR) spectroscopy is applied to a series of w/o emulsions of an aqueous anthocyanin-rich bilberry extract dispersed in a medium chain triglyceride (MCT) oil phase. The content of the emulsifier polyglycerin-polyricinoleat (PGPR) has been varied systematically in order to investigate whether or not its concentration has an impact on the molecular stabilization mechanisms. The molecular stabilization is accessed by a careful analysis of the IR spectrum, where changes in the vibrational frequencies and signal strengths indicate alterations of the molecular environment at the water/oil interface. The results suggest that adding emulsifier in excess of 1% by weight does not lead to an enhanced stabilization of the emulsion.

Encapsulation of orange terpenes investigating a plasticisation extrusion process.

Extrusion is widely used for flavour encapsulation. However, there is a lack of process understanding. This study is aimed at improving the understanding of a counter rotating twin screw extrusion process. Orange terpenes as model flavour, maltodextrin and sucrose as matrix materials, and a water feed rate between 4.0% and 5.7% were applied. Product temperatures < 80 °C and specific mechanical energy inputs <260 Wh/kg resulted. Amorphous and partly crystalline samples were obtained. The loss of crystalline sucrose was linked to a dissolution process of the sugar in the available water amount. Melting of the excipients did not arise, resulting in a plasticisation extrusion process. Maximally 67% of the flavour was retained (corresponding to a 4.1% product flavour load). The flavour loss correlated with insufficient mixing during the process and flavour evaporation after extrusion. Based on these results, recommendations for an improved encapsulation process are given.

Encapsulation of liquids using a counter rotating twin screw extruder.

Until now extrusion is not applied for pharmaceutical encapsulation processes, whereas extrusion is widely used for encapsulation of flavours within food applications. Based on previous mixing studies, a hot melt counter-rotating extrusion process for encapsulation of liquid active pharmaceutical ingredients (APIs) was investigated. The mixing ratio of maltodextrin to sucrose as matrix material was adapted in first extrusion trials. Then the number of die holes was investigated to decrease expansion and agglutination of extrudates to a minimum. At a screw speed of 180 min(-1) the product temperature was decreased below 142 °C, resulting in extrudates of cylindrical shape with a crystalline content of 9-16%. Volatile orange terpenes and the nonvolatile α-tocopherol were chosen as model APIs. Design of experiments were performed to investigate the influences of barrel temperature, powder feed rate, and API content on the API retentions. A maximum of 9.2% α-tocopherol was encapsulated, while the orange terpene encapsulation rate decreased to 6.0% due to evaporation after leaving the die. During 12 weeks of storage re-crystallization of sucrose occurred; however, the encapsulated orange terpene amount remained unchanged.

Mechanistic study of carvacrol processing and stabilization as glassy solid solution and microcapsule.

Essential oils and other liquid active pharmaceutical ingredients (APIs) are frequently microencapsulated to improve shelf life, handling, and for tailoring release. A glassy solid solution (GSS), a single-phase system, where the excipient is plasticized by the API, could be an alternative formulation system. Thus this study focuses on the investigation of two formulation strategies using carvacrol as a model compound, namely a microcapsule (MC) and a glassy solid solution (GSS). Applying the solubility parameter approach, polyvinylpyrrolidone (PVP) was chosen as a suitable matrix material for a GSS system, whereas maltodextrin and sucrose served as excipients for a microcapsule (MC) system. Differential scanning calorimetry (DSC) measurements of the excipients' glass transition temperatures and the melting point of carvacrol verified plasticizing properties of carvacrol on PVP. Batch mixing processes, as preliminary experiments for future extrusion processes, were performed to prepare GSSs and MCs with various amounts of carvacrol, followed by crushing and sieving. Maximally 4.5% carvacrol was encapsulated in the carbohydrate material, whereas up to 16.3% were stabilized as GSS, which is an outstanding amount. However, grinding of the samples led to a loss of up to 30% of carvacrol.

Is the antioxidative effectiveness of a bilberry extract influenced by encapsulation?

BACKGROUND: Bilberries (Vaccinium myrtillus L.) have been suggested to have preventive properties against diseases associated with oxidative stress such as colon cancer or inflammatory bowel diseases. Therefore the gastrointestinal tract is regarded as a potential target for prevention. In this study the antioxidative properties of a commercially available anthocyanin-rich bilberry extract (BE) were investigated in comparison with four different BE-loaded microcapsule systems. As markers to describe the antioxidant status in this cellular system, intracellular reactive oxygen species (ROS) levels, oxidative DNA damage and total glutathione (tGSH) levels were monitored. RESULTS: Incubations with the BE-loaded capsule systems showed an increase in cellular glutathione levels and reduction of ROS levels at high BE concentrations (100-500 µg mL(-1) ) and a positive effect on the formation of DNA strand breaks (5-10 µg mL(-1) BE). The biological properties of BE-loaded pectin amide core-shell capsules, whey protein matrix capsules and coated apple pectin matrix capsules were comparable to those of the non-encapsulated BE. CONCLUSION: Overall, the BE and the encapsulated BE types tested have antioxidative activity under the studied assay conditions in terms of the prevention of oxidative DNA damage, the reduction of intracellular ROS and the enhancement of cellular tGSH.

Production of W/O/W (water-in-oil-in-water) multiple emulsions: droplet breakup and release of water.

We investigate breakup of W/O/W double emulsion droplets at high viscosity ratios and coalescence of inner water droplets dependent on the dispersed phase content (DPC) of the inner emulsion. The rheological analyses of the inner emulsions confirm the behavior expected from literature - increasing viscosity with increasing DPC and elastic behavior for high DPC. The resulting droplet sizes seem to be influenced only by the viscosity ratio calculated using the viscosity of the inner emulsion. An influence of the elastic properties of the inner emulsions could not be observed. Moreover, breakup of double emulsion droplets seems to follow the same rules as breakup of Newtonian droplets. In the second part of the paper we focus on the release of water from double emulsions by coalescence. A direct correlation between resulting double emulsion droplet sizes and encapsulation efficiency was found for each system. The initial inner dispersed phase content has a big influence on the release rate. This can partly be explained by the influence of the dispersed phase content on collision rate. Moreover, it was found that for high internal phase concentrations inner droplets coalesce with each other. The so formed bigger inner droplets seem to increase the overall release rate.

Influence of medium-chain triglycerides on expansion and rheological properties of extruded corn starch.

Enhancement of product properties of extruded starch based products can be achieved by incorporating health promoting oil into the matrix. In order to achieve a preferably high expansion with a homogeneous pore structure, the expansion mechanisms have to be understood. In our study, we applied a customized twin-screw extruder set up to feed medium-chain triglycerides after complete gelatinization of corn starch, minimizing its effect on the starch gelatinization. Despite the fact, that the addition of up to 3.5% oil showed no influence on the extrusion parameters, we observed a three-fold increase in sectional expansion. Longitudinal expansion was less affected by the oil content. Rheological properties of the gelatinized starch were measured using an inline slit die rheometer. In addition to shear viscosity, we presented a method to determine the Bagley pressure, which reflects the elongational properties of a fluid. We were able to observe an increase in the Bagley pressure from about 25 bar up to 35-37 bar due to the addition of oil.

In vitro toxicity of amorphous silica nanoparticles in human colon carcinoma cells.

The use of nanostructured silica (SiO2) particles is no longer restricted to biomedical and (bio-) technological fields but rather finding applications in products of the food industry. Thus, our studies on the toxicological relevance of SiO2 nanoparticles focused on cytotoxic effects, the modulation of the cellular redox status and the impact on DNA integrity in human colon carcinoma cells (HT29). The results indicate that these SiO2 nanoparticles stimulate the proliferation of HT29 cells, depending on the incubation time and the particle size. The cytotoxicity of the investigated SiO2 nanoparticles was found to depend on the concentration, size and on the FCS content of the culture medium. Furthermore, SiO2 seem to interfere with glutathione biosynthesis. The results indicate further that effects of SiO2 NPs are not mediated by oxidative stress but by interference with the MAPK/ERK1/2 as well as the Nrf2/ARE signalling pathways. Additionally, investigations regarding DNA integrity revealed no substantial (oxidative) DNA damage.

Stability of anthocyanin-rich w/o/w-emulsions designed for intestinal release in gastrointestinal environment.

Anthocyanins belong to the most important hydrophilic plant pigments. Outside their natural environment, these molecules are extremely unstable. Encapsulating them in submicron-sized containers is one possibility to stabilize them for the use in bioactivity studies or functional foods. The containers have to be designed for a target release in the human gastrointestinal system. In this contribution, an anthocyanin-rich bilberry extract was encapsulated in the inner aqueous phase of water-in-oil-in-water-double emulsions. The physical stability as well as the release of free fatty acids and encapsulated, bioactive substances from the emulsions during an in vitro gastrointestinal passage were investigated. The focus was on the influence of emulsion microstructural parameters (for example, inner and outer droplet size, disperse phase content) and required additives (emulsifier systems), respectively. It could be shown that it is possible to stabilize anthocyanins in the inner phase of double emulsions. The release rate of free fatty acids during incubation was independent of the emulsifier used. However, the exterior (O/W)-emulsifier has an impact on the stability of multiple emulsions in gastrointestinal environment and, thus, the location of release. Long-chained emulsifiers like whey proteins are most suitable to transport a maximum amount of bioactive substances to the effective location, being the small intestine for anthocyanins. In addition, it was shown that the dominating release mechanism for entrapped matter was coalescence of the interior W(1) -droplets with the surrounding W(2) -phase.

Mass transport characteristics of alkyl amines in a water/n-decane system.

Water-in-decane emulsions can be applied as reaction system for the precipitation of nanoparticles. Herein the precipitation reaction is induced once an oil as well as water soluble compound (here: alkyl amines) diffuses from the continuous oil phase into a water based droplet, loaded with the reaction partner. Thus, the mass transfer and adsorption characteristics of the alkyl amine at the interface are key parameters to understand particle formation in emulsion droplets. For this reason, the effective diffusion coefficients and the interfacial tension of different alkyl amines in a water/n-decane system were estimated. Furthermore, emulsifiers necessary for the stability of the emulsion might represent a diffusion barrier. In order to determine its influence, diffusion experiments were also conducted in the presence of emulsifier. The effective diffusion coefficients were measured using an adapted photometric method. To identify relevant adsorption characteristics of the water/n-decane/alkyl amine systems, the interfacial tension was studied with the pendant drop technique. According to the results, we can draw three conclusions: First, the effective diffusion coefficient depends on the molecular structure of the amines. Second, regarding our materials, the surface activity and surface coverage proved to be a governing parameter to describe differences in the transport mechanism. And third, the presence of additional surface active compounds leads to a decrease of the effective diffusion coefficient.

Characterisation of alkyl amines at the water/air surface with the drop and bubble profile analysis tensiometry.

Pendant drop and buoyant bubble methods have been used to study the surface characteristics of alkyl amines at the water/air surface. The investigated alkyl amines, triethylamine and octylamine, showed unusual changes in the surface tension as a function of time: an initially steep drop and a subsequent steady increase in the surface tension until a value close to the one of the pure water/air system was observed. This phenomenon is explained by the evaporation of the alkyl amines, for which several sets of experiments have been conducted with the pendant drop and buoyant bubble methods. Using an appropriate experimental protocol, the equilibrium adsorption behaviour of the two amines can be quantitatively measured.

Attenuated total reflection infrared (ATR-IR) spectroscopy of a water-in-oil emulsion.

Water-in-oil (w/o) emulsions are of great interest in many areas including food technology and the oil and gas industry. However, the molecular mechanisms that lead to a stable emulsion are yet to be fully understood. In this article, the potential of attenuated total reflection (ATR) infrared (IR) spectroscopy for studying the influence of an emulsifier on the molecular water structure in a thin layer at the w/o interface is demonstrated. For this purpose, IR spectra from a bilberry extract w/o emulsion are analyzed. The thickness of the probed water layer is estimated to be below 0.5 µm, which is well below the droplet diameter. The IR spectra recorded in aqueous solution and the w/o emulsion reveal a strengthening of the intramolecular covalent O-H bonds in the presence of the emulsifier, which in turn indicates a change in the hydrogen bond network in terms of weakening the intermolecular interactions in the water layer at the interface.

Surfactant concentration regime in miniemulsion polymerization for the formation of MMA nanodroplets by high-pressure homogenization.

This article focuses on the adequate surfactant concentration regime in which MMA droplets are stabilized sufficiently against coalescence during high-pressure homogenization but still no diffusion processes from droplets to micelles take place in the polymerization. Monomer miniemulsions with different surfactant concentrations were prepared with different energy inputs. Emulsions result that depend either on the surfactant concentration or on the energy input of the homogenization process. For both cases, the occupancy of the interface is compared as a function of the droplet size. It is shown that the surfactant concentration needed for the stabilization of a specified interface area decreases with increasing droplet size. For the dependence of droplet size on the energy input, it is shown that more surfactant can be applied before emulsion polymerization starts, but the applicable surfactant concentration is lower than the cmc and also depends on droplet size.

Online shear viscosity measurement of starchy melts enriched in wheat bran.

UNLABELLED: Addition of wheat bran to flours modifies their expansion properties after cooking extrusion. This can be attributed to changes in the melt shear viscosity at the die. The effect of wheat bran concentration added to achieve 2 levels of dietary fibers of 12. 6% and 24.4%, and process conditions on the shear viscosity of wheat flour was therefore assessed using an online twin-slit rheometer. The shear viscosity measured at 30 s⁻¹ ranged from 9.5 × 10³ to 53.4 × 10³ Pa s. Regardless of the process conditions and bran concentration, the extruded melts showed a pseudoplastic behavior with a power law index n ranging from 0.05 to 0.27. Increasing the barrel temperature of the extruder from 120 to 180 °C, the water content from 18% to 22% or the screw speed from 400 to 800 rpm significantly decreased the melt shear viscosity at the extruder exit. The addition of bran significantly increased the melt shear viscosity only at the highest bran concentration. The effect was process condition dependant. Mathematical interpretations, based upon observations, of the experimental data were carried out. They can be used to predict the effect of the process conditions on the melt shear viscosity at the die of extruded wheat flour with increasing bran concentration. The viscosity data will be applied in future works to study the expansion properties of extruded wheat flour supplemented with bran. PRACTICAL APPLICATION: Incorporation of wheat bran, a readily available and low cost by-product, in extruded puffed foods is constrained due to its negative effect on the product texture. Understanding the effect of wheat bran on rheological properties of extruded melts, driving the final product properties, is essential to provide solutions to the food industry and enhance its use.

Generation of 4-hydroxy-2,5-dimethyl-3(2H)-furanone from rhamnose as affected by reaction parameters: experimental design approach.

The formation of 4-hydroxy-2,5-dimethyl-3(2H)-furanone (HDMF) was studied in aqueous model systems containing L-rhamnose and L-lysine. The approach consisted in systematically varying four reaction parameters (rhamnose concentration, rhamnose to lysine ratio, pH, and phosphate concentration) at 3 levels. A fractional factorial design was used to reduce the number of trials. The degradation of rhamnose was followed by high performance anion exchange chromatography and the formation of HDMF by solid phase extraction in combination with GC/MS. The study permitted the identification of critical reaction parameters that affect the formation of HDMF from rhamnose in aqueous systems. Although all studied parameters have some impact on the HDMF formation and rhamnose degradation kinetics, the effect of phosphate is by far the most important, followed by concentration of precursors and pH. The experimental design approach permitted us, with a limited number of experiments, to accurately model the effects of the four investigated reaction parameters on the kinetics of rhamnose degradation and HDMF formation (R(2)>0.93). Overall, the results indicate that rhamnose can be an excellent precursor of HDMF (yield >40 mol%), if the reaction conditions are well mastered.

Cellular uptake of carotenoid-loaded oil-in-water emulsions in colon carcinoma cells in vitro.

Oil-in-water emulsions allow the preparation of lipophilic compounds such as carotenoids in the liquid form. Here, the effect of a combination of some emulsifiers, such as two whey protein isolates (BiPro and BioZate), sucrose laurate (L-1695), and polyoxyethylene-20-sorbitan-monolaurate (Tween 20), on the stability of lycopene and astaxanthin in emulsions, droplet size, and cellular uptake of these carotenoids has been investigated. The degradation of lycopene was slightly more pronounced than that of astaxanthin in all emulsions. The concentration of lycopene and astaxanthin decreased by about 30% and 20%, respectively, in all emulsions after 3 weeks of storage in the dark at 4 degrees C. The kind of emulsifiers or their combinations have played an important role in the cellular uptake by the colon carcinoma cells line HT-29 and Caco-2.