Preliminary images from an adaptive imaging system.

I-ImaS (Intelligent Imaging Sensors) is a European project aiming to produce real-time adaptive X-ray imaging systems using Monolithic Active Pixel Sensors (MAPS) to create images with maximum diagnostic information within given dose constraints. Initial systems concentrate on mammography and cephalography. In our system, the exposure in each image region is optimised and the beam intensity is a function of tissue thickness and attenuation, and also of local physical and statistical parameters in the image. Using a linear array of detectors, the system will perform on-line analysis of the image during the scan, followed by optimisation of the X-ray intensity to obtain the maximum diagnostic information from the region of interest while minimising exposure of diagnostically less important regions. This paper presents preliminary images obtained with a small area CMOS detector developed for this application. Wedge systems were used to modulate the beam intensity during breast and dental imaging using suitable X-ray spectra. The sensitive imaging area of the sensor is 512 x 32 pixels 32 x 32 microm(2) in size. The sensors' X-ray sensitivity was increased by coupling to a structured CsI(Tl) scintillator. In order to develop the I-ImaS prototype, the on-line data analysis and data acquisition control are based on custom-developed electronics using multiple FPGAs. Images of both breast tissues and jaw samples were acquired and different exposure optimisation algorithms applied. Results are very promising since the average dose has been reduced to around 60% of the dose delivered by conventional imaging systems without decrease in the visibility of details.

A review of caveats in statistical nuclear image analysis.

A large body of the published literature in nuclear image analysis do not evaluate their findings on an independent data set. Hence, if several features are evaluated on a limited data set over-optimistic results are easily achieved. In order to find features that separate different outcome classes of interest, statistical evaluation of the nuclear features must be performed. Furthermore, to classify an unknown sample using image analysis, a classification rule must be designed and evaluated. Unfortunately, statistical evaluation methods used in the literature of nuclear image analysis are often inappropriate. The present article discusses some of the difficulties in statistical evaluation of nuclear image analysis, and a study of cervical cancer is presented in order to illustrate the problems. In conclusion, some of the most severe errors in nuclear image analysis occur in analysis of a large feature set, including few patients, without confirming the results on an independent data set. To select features, Bonferroni correction for multiple test is recommended, together with a standard feature set selection method. Furthermore, we consider that the minimum requirement of performing statistical evaluation in nuclear image analysis is confirmation of the results on an independent data set. We suggest that a consensus of how to perform evaluation of diagnostic and prognostic features is necessary, in order to develop reliable tools for clinical use, based on nuclear image analysis.

Ultrastructural texture analysis as a diagnostic tool in mouse liver carcinogenesis.

Nuclear texture, which reflects the overall structure of the chromatin, may be used to detect early as well as later stages of malignancy. In this study, texture analysis was applied to four groups of liver cells in mice: normal and regenerating liver, hyperplastic nodules, and hepatocellular carcinomas. The best discriminating set of features was selected based on a training data set. The model was then tested on an independent series of 10 hyperplastic nodules and 6 hepatocellular carcinomas. A correct classification rate of 95% was obtained on the training data set and 100% accuracy was obtained on the test set. This kind of image analysis technique offers an opportunity to identify and describe the nuclear changes related to carcinogenesis, and the present results demonstrate the possible use of digital texture analysis as a diagnostic aid in tumor pathology.