Room-Temperature Photochemical Copper-Mediated Fluorination of Aryl Iodides.

This report describes a method for the photochemical Cu-mediated fluorination of aryl iodides with AgF via putative aryl radical (Ar•) intermediates. It involves irradiating an aryl iodide with UVB light (λmax = 313 nm) in the presence of a mixture of CuI and CuII salts and AgF. Under these conditions, fluorination proceeds at room temperature for substrates containing diverse substituents, including alkoxy and alkyl groups, ketones, esters, sulfonate esters, sulfonamides, and protected amines. This method has been translated to radiofluorination using a combination of K18F, K3PO4, and AgOTf.

[68Ga]PSMA-11 for positron emission tomography (PET) imaging of prostate-specific membrane antigen (PSMA)-positive lesions in men with prostate cancer.

INTRODUCTION: Theranostics targeting prostate-specific membrane antigen (PSMA) represent a new targeted approach for prostate cancer care that combines diagnostic and therapeutic radiopharmaceuticals to diagnose and treat the disease. Positron emission tomography (PET) is the imaging method of choice and several diagnostic radiopharmaceuticals for quantifying PSMA have received FDA approval and are in clinical use. [68Ga]Ga-PSMA-11 is one such imaging agent and the focus of this article. One beta-emitting radioligand therapy ([177Lu]Lu-PSMA-617) has also received FDA approval for prostate cancer treatment, and several other alpha- and beta-emitting radioligand therapies are in clinical trials. AREAS COVERED: Theranostics targeting PSMA in men with prostate cancer are discussed with a focus on use of [68Ga]Ga-PSMA-11 for imaging PSMA-positive lesions in men with prostate cancer. The review covers [68Ga]Ga-PSMA-11 manufacture, current regulatory status, comparison of [68Ga]Ga-PSMA-11 to other imaging techniques, clinical updates, and emerging applications of artificial intelligence for [68Ga]Ga-PSMA-11 PET. EXPERT OPINION: [68Ga]Ga-PSMA-11 is used in conjunction with a PET/CT scan to image PSMA positive lesions in men with prostate cancer. It is manufactured by chelating precursor with68Ga, either from a generator or cyclotron, and has regulatory approval around the world. It is widely used clinically in conjunction with radioligand therapies like [177Lu]Lu-PSMA-617.

Combining Nuclear Medicine With Other Modalities: Future Prospect for Multimodality Imaging.

This meeting report summarizes a consultants meeting that was held at International Atomic Energy Agency Headquarters, Vienna, in July 2022 to provide an update on the development of multimodality imaging by combining nuclear medicine imaging agents with other nonradioactive molecular probes and/or biomedical imaging techniques.

Improved Radiosynthesis and Automation of [11C]2-(2,6-Difluoro-4-((2-(N-methylphenylsulfonamido)ethyl)thio)phenoxy)acetamide ([11C]K2) for Positron Emission Tomography of the Glutamate α-Amino-3-hydroxy-5-methyl-4-isoxazole Propionic Acid (AMPA) Receptor.

A new automated radiosynthesis of [11C]2-(2,6-difluoro-4-((2-(N-methylphenylsulfonamido)ethyl)thio)phenoxy)acetamide ([11C]K2), a radiopharmaceutical for the glutamate α-amino-3-hydroxy-5-methyl-4-isoxazole propionic acid (AMPA) receptor, is reported. Although manual syntheses have been described, these are unsuitable for routine production of larger batches of [11C]K2 for (pre)clinical PET imaging applications. To meet demands for the imaging agent from our functional neuroimaging collaborators, herein, we report a current good manufacturing practice (cGMP)-compliant synthesis of [11C]K2 using a commercial synthesis module. The new synthesis is fully automated and has been validated for clinical use. The total synthesis time is 33 min from end of bombardment, and the production method provides 2.66 ± 0.3 GBq (71.9 ± 8.6 mCi) of [11C]K2 in 97.7 ± 0.5% radiochemical purity and 754.1 ± 231.5 TBq/mmol (20,382.7 ± 6256.1 Ci/mmol) molar activity (n = 3). Batches passed all requisite quality control testing confirming suitability for clinical use.

Recent advances and impending challenges for the radiopharmaceutical sciences in oncology.

This paper is the first of a Series on theranostics that summarises the current landscape of the radiopharmaceutical sciences as they pertain to oncology. In this Series paper, we describe exciting developments in radiochemistry and the production of radionuclides, the development and translation of theranostics, and the application of artificial intelligence to our field. These developments are catalysing growth in the use of radiopharmaceuticals to the benefit of patients worldwide. We also highlight some of the key issues to be addressed in the coming years to realise the full potential of radiopharmaceuticals to treat cancer.

Trends in nuclear medicine and the radiopharmaceutical sciences in oncology: workforce challenges and training in the age of theranostics.

Although the promise of radionuclides for the diagnosis and treatment of disease was recognised soon after the discovery of radioactivity in the late 19th century, the systematic use of radionuclides in medicine only gradually increased over the subsequent hundred years. The past two decades, however, has seen a remarkable surge in the clinical application of diagnostic and therapeutic radiopharmaceuticals, particularly in oncology. This development is an exciting time for the use of theranostics in oncology, but the rapid growth of this area of nuclear medicine has created challenges as well. In particular, the infrastructure for the manufacturing and distribution of radiopharmaceuticals remains in development, and regulatory bodies are still optimising guidelines for this new class of drug. One issue of paramount importance for achieving equitable access to theranostics is building a sufficiently trained workforce in high-income, middle-income, and low-income countries. Here, we discuss the key challenges and opportunities that face the field as it seeks to build its workforce for the 21st century.

Development of High-Throughput Experimentation Approaches for Rapid Radiochemical Exploration.

Positron emission tomography is a widely used imaging platform for studying physiological processes. Despite the proliferation of modern synthetic methodologies for radiolabeling, the optimization of these reactions still primarily relies on inefficient one-factor-at-a-time approaches. High-throughput experimentation (HTE) has proven to be a powerful approach for optimizing reactions in many areas of chemical synthesis. However, to date, HTE has rarely been applied to radiochemistry. This is largely because of the short lifetime of common radioisotopes, which presents major challenges for efficient parallel reaction setup and analysis using standard equipment and workflows. Herein, we demonstrate an effective HTE workflow and apply it to the optimization of copper-mediated radiofluorination of pharmaceutically relevant boronate ester substrates. The workflow utilizes commercial equipment and allows for rapid analysis of reactions for optimizing reactions, exploring chemical space using pharmaceutically relevant aryl boronates for radiofluorinations, and constructing large radiochemistry data sets.

Photo- and Cu-Mediated 11C Cyanation of (Hetero)Aryl Thianthrenium Salts.

We present a photo- and Cu-mediated 11C cyanation of bench-stable (hetero)aryl thianthrenium salts via an aryl radical addition pathway. The thianthrenium substrates can be readily accessed via C-H functionalization, and the radiocyanation protocol proceeds under mild conditions (<50 °C, 5 min) and can be automated using open-source, readily accessible augmentations to existing radiochemistry equipment.

Improved purification of cyclotron [68Ga]GaCl3 for the production of 68Ga radiopharmaceuticals.

INTRODUCTION: Increased demand for NetSpot and Illuccix as requirement to receive the respective Lutathera and Pluvicto radiotherapies, and monitor subsequent response to treatment, have reinforced the need to develop alternative ways of producing gallium-68 (68Ga). Building on our efforts to produce 68Ga in a liquid target on a GE PETtrace, the goal of this work is to modify the current GE Gallium Chloride cassette using the FASTLab 2 synthesis module to produce [68Ga]GaCl3 equivalent to a 1.85 GBq generator and demonstrate compatibility with FDA-approved kits for production of 68Ga-labeled radiopharmaceuticals. METHODS: 68Ga was produced in a liquid target via the 68Zn(p,n)68Ga reaction. 68Ga was loaded onto various sizes of ZR resins (ZR Load, 0.3 mL, 1 mL, or 2 mL). The loading efficiency was determined using a dose calibrator. After washing with HNO3, 1.75 M HCl was used to elute the ZR Load resin through various sizes of a second ZR resin (ZR CG, 0 mL, 2 mL, 4 mL). Using 0.5 mL fractions, the elution profile was determined. Compatibility of the [68Ga]GaCl3 with NetSpot and Illuccix kits was investigated. Radiochemical purity (RCP) and 4 h stability were determined using radioTLC and radioHPLC. Using a modified [68Ga]GaCl3 cassette and new FASTLab program, 6 validation preparations were conducted using NetSpot and Illuccix kits for which RCP, stability, sterility and suitability were determined. Dual irradiation of 2 liquid targets was also performed, which was used to simultaneously prepare 1 NetSpot and 2 Illuccix kits by diluting the required activity with 0.1 M HCl. RESULTS: The commercially available GE Cassette gave low RCP using commercial FDA kits. To optimize this, the loading efficiency onto ZR Load and the ratio of ZR resin used to load the initial activity and subsequent elution were explored. When using a 2:4 ratio of ZR Load to ZR CG, 97.89 % RCP was observed when a 3.8 mL [68Ga]GaCl3 solution was used. For Dotatate validation, 0.55 mL of buffer was added to 4.2 mL of [68Ga]GaCl3 which gave 1.35 GBq of formulated product. For Illuccix validation, [68Ga]GaCl3 was added to 2.5 mL of buffer which gave 1.52 GBq of [68Ga]Ga-PSMA-11. Formulated products passed package insert quality control (QC) requirements. When dual target irradiations were performed, 2.84 GBq was delivered to an external vial and used to label 1 NetSpot and 2 Illuccix kits simultaneously, and each kit also met or exceeded established QC criteria. CONCLUSION: Methods are reported for using cyclotron-produced 68Ga from a liquid target in conjunction with FDA-approved NetSpot and Illucix kits. By employing a 2 mL ZR Load resin with a 4 mL ZR CG resin, adequate resolution between residual 68Zn and desired 68Ga was achieved. By modifying the FASTLab procedure to retain the final 2.5 mL of eluate from the ZR CG resin, [68Ga]GaCl3 equivalent to a new 1.85 GBq generator was obtained. This was suitable for labeling NetSpot and Illucix kits, resulting in high incorporation of 68Ga (RCP >95 %), which has not previously been demonstrated. Delivering [68Ga]GaCl3 into an external vial and diluting with 0.1 M HCl makes it possible to prepare multiple kits simultaneously. These new procedures should facilitate use of cyclotron-produced [68Ga]GaCl3 for clinical production going.

Zinc-Mediated Radiosynthesis of Unprotected Fluorine-18 Labelled α-Tertiary Amides.

This report describes the development of a Zn(OTf)2 -mediated method for converting α-tertiary haloamides to the corresponding fluorine-18 labelled α-tertiary fluoroamides with no-carrier-added [18 F]tetramethylammonium fluoride. 1,5,7-Triazabicyclo[4.4.0]dec-5-ene is an essential additive for achieving high radiochemical conversion. Under the optimised conditions, radiofluorination proceeds at sterically hindered tertiary sites in high radiochemical conversions, yields, and purities. This method has been successfully automated and applied to access >200 mCi (>7.4 GBq) of several model radiofluorides. Mechanistic studies led to the development of a new, nucleophilic C-H radiofluorination process using N-sulphonyloxyamide substrates.

Exploring HD-tDCS Effect on µ-opioid Receptor and Pain Sensitivity in Temporomandibular Disorder: A Pilot Randomized Clinical Trial Study.

This study explored the association between experimentally-induced pain sensitivity and µ-opioid receptor (µOR) availability in patients with temporomandibular disorder (TMD) and further investigated any changes in the pain and µOR availability following high-definition transcranial direct current stimulation (HD-tDCS) over the primary motor cortex (M1) with pilot randomized clinical trials. Seven patients with TMD completed either active (n = 3) or sham treatment (n = 4) for 10 daily sessions and underwent positron emission tomography (PET) scans with [11C]carfentanil, a selective µOR agonist, a week before and after treatment. PET imaging consisted of an early resting and late phase with the sustained masseteric pain challenge by computer-controlled injection of 5% hypertonic saline. We also included 12 patients with TMD, obtained from our previous study, for baseline PET analysis. We observed that patients with more sensitivity to pain, indicated by lower infusion rate, had less µOR availability in the right amygdala during the late phase. Moreover, active M1 HD-tDCS, compared to sham, increased µOR availability post-treatment in the thalamus during the early resting phase and the amygdala, hippocampus, and parahippocampal gyrus during the late pain challenge phase. Importantly, increased µOR availability post-treatment in limbic structures including the amygdala and hippocampus was associated with decreased pain sensitivity. The findings underscore the role of the µOR system in pain regulation and the therapeutic potential of HD-tDCS for TMD. Nonetheless, large-scale studies are necessary to establish the clinical significance of these results. TRIAL REGISTRATION: ClinicalTrial.gov (NCT03724032) PERSPECTIVE: This study links pain sensitivity and µ-opioid receptors in patients with TMD. HD-tDCS over M1 improved µOR availability, which was associated with reduced pain sensitivity. Implications for TMD pain management are promising, but larger clinical trials are essential for validation.

Tandem Iridium-Catalyzed C-H Borylation/Copper-Mediated Radiofluorination of Aromatic C-H Bonds with [18F]TBAF.

Direct C-H functionalization of (hetero)aromatic C-H bonds with iridium-catalyzed borylation followed by copper-mediated radiofluorination of the in situ generated organoboronates affords fluorine-18 labeled aromatics in high radiochemical conversions and meta-selectivities. This protocol describes the benchtop reaction assembly of the C-H borylation and radiofluorination steps, which can be utilized for the fluorine-18 labeling of densely functionalized bioactive scaffolds.

GABAA Receptor Benzodiazepine Binding Sites and Motor Impairments in Parkinson's Disease.

Flumazenil is an allosteric modulator of the γ-aminobutyric acid-A receptor (GABAAR) benzodiazepine binding site that could normalize neuronal signaling and improve motor impairments in Parkinson's disease (PD). Little is known about how regional GABAAR availability affects motor symptoms. We investigated the relationship between regional availability of GABAAR benzodiazepine binding sites and motor impairments in PD. Methods: A total of 11 Patients with PD (males; mean age 69.0 ± 4.6 years; Hoehn and Yahr stages 2-3) underwent [11C]flumazenil GABAAR benzodiazepine binding site and [11C]dihydrotetrabenazine vesicular monoamine transporter type-2 (VMAT2) PET imaging and clinical assessment. Stepwise regression analysis was used to predict regional cerebral correlates of the four cardinal UPDRS motor scores using cortical, striatal, thalamic, and cerebellar flumazenil binding estimates. Thalamic GABAAR availability was selectively associated with axial motor scores (R2 = 0.55, F = 11.0, ß = -6.4, p = 0.0009). Multi-ligand analysis demonstrated significant axial motor predictor effects by both thalamic GABAAR availability (R2 = 0.47, ß = -5.2, F = 7.2, p = 0.028) and striatal VMAT2 binding (R2 = 0.30, ß = -3.9, F = 9.1, p = 0.019; total model: R2 = 0.77, F = 11.9, p = 0.0056). Post hoc analysis demonstrated that thalamic [11C]methyl-4-piperidinyl propionate cholinesterase PET and K1 flow delivery findings were not significant confounders. Findings suggest that reduced thalamic GABAAR availability correlates with worsened axial motor impairments in PD, independent of nigrostriatal degeneration. These findings may augur novel non-dopaminergic approaches to treating axial motor impairments in PD.

C-H radiocyanation of bioactive molecules via sequential iodination/copper-mediated cross-coupling.

This report describes a net C-H radiocyanation reaction for the transformation of electron rich (hetero)aromatic substrates into 11CN-labeled products. Electrophilic C(sp2)-H iodination of the (hetero)arene with N-iodosuccinimide is followed by Cu-mediated radiocyanation with K11CN. This sequence is applied to a variety of substrates, including the nucleobases uracil and cytosine, the amino acids tyrosine and tryptophan, and the peptide LYRAGWRAFS, which undergoes selective C-H radiocyanation at the tryptophan (W) residue.

Proceedings of international symposium of trends in radiopharmaceuticals 2023 (ISTR-2023).

The International Atomic Energy Agency (IAEA) held the 3rd International Symposium on Trends in Radiopharmaceuticals, (ISTR-2023) at IAEA Headquarters in Vienna, Austria, during the week of 16-21 April 2023. This procedural paper summarizes highlights from symposium presentations, posters, panel discussions and satellite meetings, and provides additional resources that may be useful to researchers working with diagnostic and therapeutic radiopharmaceuticals in the academic, government and industry setting amongst IAEA Member States and beyond. More than 550 participants in person from 88 Member States attended the ISTR-2023. Over 360 abstracts were presented from all over the world by a diverse group of global scientists working with radiopharmaceuticals. Given this group of international radiochemists is unique to ISTR (IAEA funding enabled many to attend), there was an invaluable wealth of knowledge on the global state of the radiopharmaceutical sciences present at the meeting. The intent of this Proceedings paper is to share this snapshot from our international colleagues with the broader radiopharmaceutical sciences community by highlighting presentations from the conference on the following topics: Isotope Production and Radiochemistry, Industrial Insights, Regional Trends, Training and Education, Women in the Radiopharmaceutical Sciences, and Future Perspectives and New Initiatives. The authors of this paper are employees of IAEA, members of the ISTR-2023 Organizing Committee and/or members of the EJNMMI Radiopharmacy and Chemistry Editorial Board who attended ISTR-2023. Overall, ISTR-2023 fostered the successful exchange of scientific ideas around every aspect of the radiopharmaceutical sciences. It was well attended by a diverse mix of radiopharmaceutical scientists from all over the world, and the oral and poster presentations provided a valuable update on the current state-of-the-art of the field amongst IAEA Member States. Presentations as well as networking amongst the attendees resulted in extensive knowledge transfer amongst the various stakeholders representing 88 IAEA Member States. This was considered particularly valuable for attendees from Member States where nuclear medicine and the radiopharmaceutical sciences are still relatively new. Since the goal is for the symposium series to be held every four years; the next one is anticipated to take place in 2027.

Ethical Considerations for Artificial Intelligence in Medical Imaging: Data Collection, Development, and Evaluation.

The development of artificial intelligence (AI) within nuclear imaging involves several ethically fraught components at different stages of the machine learning pipeline, including during data collection, model training and validation, and clinical use. Drawing on the traditional principles of medical and research ethics, and highlighting the need to ensure health justice, the AI task force of the Society of Nuclear Medicine and Molecular Imaging has identified 4 major ethical risks: privacy of data subjects, data quality and model efficacy, fairness toward marginalized populations, and transparency of clinical performance. We provide preliminary recommendations to developers of AI-driven medical devices for mitigating the impact of these risks on patients and populations.

Automated production of 11 C-labeled carboxylic acids and esters via "in-loop" 11 C-carbonylation using GE FX synthesis modules.

An in-loop 11 C-carbonylation process for the radiosynthesis of 11 C-carboxylic acids and esters from halide precursors has been developed. The reaction proceeds at room temperature under mild conditions and enables 11 C-carbonylation of both electron deficient and electron rich (hetero)aromatic halides to provide 11 C-carboxylic acids and esters in good to excellent radiochemical yields, high radiochemical purity, and excellent molar activity. The process has been fully automated using commercial radiochemistry synthesis modules, and application to clinical production is demonstrated via validated cGMP radiosyntheses of [11 C]bexarotene and [11 C]acetoacetic acid.

Ethical Considerations for Artificial Intelligence in Medical Imaging: Deployment and Governance.

The deployment of artificial intelligence (AI) has the potential to make nuclear medicine and medical imaging faster, cheaper, and both more effective and more accessible. This is possible, however, only if clinicians and patients feel that these AI medical devices (AIMDs) are trustworthy. Highlighting the need to ensure health justice by fairly distributing benefits and burdens while respecting individual patients' rights, the AI Task Force of the Society of Nuclear Medicine and Molecular Imaging has identified 4 major ethical risks that arise during the deployment of AIMD: autonomy of patients and clinicians, transparency of clinical performance and limitations, fairness toward marginalized populations, and accountability of physicians and developers. We provide preliminary recommendations for governing these ethical risks to realize the promise of AIMD for patients and populations.