Biosynthesis of TiO2 nano particles by using Rosemary (Rosmarinus officinalis) leaf extracts and its application for crystal dye degradation under sunlight.

Titanium dioxide (TiO2) nanoparticles were prepared through Rosmarinus-officinalis leaf extracts at 90 and 200°C. In this research, the degradations of methylene blues by using TiO2 nanoparticles Sun light radiations were studied. The synthesized materials were characterized using XRDs, UV-Vis, PL, SEM, TEM, EDS and XPS. The results displayed that bio-synthesis temperatures intrude the shapes and sizes of TiO2 nanoparticles. For TiO2-90, micrographs show separable crystalline with irregular morphologies and agglomerate cubic particles. For the other TiO2-200 sample, SEM and TEM micro-imaging shows crumbly agglomerated cubic structures. The XRD shows that the intense peaks observed at angles of 25.37°, 37.19°, 47.81° and 53.89° confirming a highly crystalline oriented as (004), (200), and (105) planes respectively. The optical properties of TiO2 nanoparticles synthesized were conveyed by PL and UV-Vis. The energy band gap calculated was 3.0 eV for both samples; that indicates heating temperature didn't influence the band gap of the samples. The elemental composition Ti and O2 is shown by EDS and XPS. Photo-catalytic experiments discovered that TiO2-90 nanoparticles were well-organized in photo-degradations of MB, likened to TiO2-200. The great activities of TiO2-90 were because of better physicochemical characteristics associated with TiO2-200 effectively degrading MB under photo-light. Photo-degradations of dye under sunlight as plentifully obtainable energy sources by TiO2, synthesized by simpler techniques, can be hopeful to grow an eco-friendly and economical process.

Regression analysis on forward modeling of diffuse optical tomography system for carcinoma cell detection.

The forward model design was employed in the Diffuse Optical Tomography (DOT) system to determine the optimal photonic flux in soft tissues like the brain and breast. Absorption coefficient (mua), reduced scattering coefficient (mus), and photonic flux (phi) were the parameters subjected to optimization. The Box-Behnken Design (BBD) method of the Response Surface Methodology (RSM) was applied to enhance the Diffuse Optical Tomography experimental system. The DC modulation voltages applied to different laser diodes of 850 nm and 780 nm wavelengths and spacing between the source and detector are the two factors operating on three optimization parameters that predicted the result through two-dimensional tissue image contours. The analysis of the Variance (ANOVA) model developed was substantial (R2 = > 0.954). The experimental results indicate that spacing and wavelength were more influential factors for rebuilding image contour. The position of the tumor in soft tissues is inspired by parameters like absorption coefficient and scattering coefficient, which depend on DC voltages applied to the Laser diode. This regression method predicted the values throughout the studied parameter space and was suitable for enhancement learning of diffuse optical tomography systems. The range of residual error percentage evaluated between experimental and predicted values for mua, mus, and phi was 0.301%, 0.287%, and 0.1%, respectively.

Growth, yield, and yield variables of onion (Allium Cepa L.) varieties as influenced by plantspacing at DambiDollo, Western Ethiopia.

Onion (Allium cepa L.) is an important bulb plant grown worldwide. Proper use of the agronomic practice has undoubtedly contributed to growing crop yields. The right level of any farming practice, like the distance between plants, plant density, date of planting, and time of harvest, can produce the wanted outcomes. Therefore, this research was piloted to evaluate the influence of plant spacing on the development of bulb harvest-related traits of onion varieties in Dambi Dollo University, Western Ethiopia, in 2021. Three onion varieties (Adama red, Monarch, Nafis) and four intra-row spaces (6 cm, 8 cm, 10 cm, and 12 cm) in factorial combinations were settled by a complete randomized block design which was simulated three times. The findings of the study indicate that all the factors related to crop growth and bulb yield of onion varieties were mainly influenced by different kinds and plant spacing. Conversely, the collaboration of these two factors did not affect all other factors, but the interaction of the two factors had a great effect on the days to maturity measured in this study. The highest plant height was registered on the onion planted at a distance of 10 cm (59.83 cm) and 12 cm (59.08 cm) distance between plants. The high commercial yields (34.44 t ha-1) and entire bulb yield (35.40 t ha-1) were found in the Nafis variety. The highest marketable yields (31.12 ha-1) and entire marketable yield (31.78 ha-1) were recorded on an onion plant planted 10 cm between plants. Therefore, in the research area, farmers can use a variety of Nafis and a 10 cm distance between plants to increase their onion production.

Biosynthesis of TiO2 nanoparticles by Caricaceae (Papaya) shell extracts for antifungal application.

Titanium dioxide nanoparticles (TiO2 NPs) were prepared by Caricaceae (Papaya) Shell extracts. The Nanoparticles were analyzed by UV-Vis spectrums, X-ray diffractions, and energy-dispersive X-rays spectroscopy analyses with a scanning electron microscope. An antifungal study was carried out for TiO2 NP in contradiction of S. sclerotiorums, R. necatrixs and Fusarium classes that verified a sophisticated inhibitions ratio for S. sclerotiorums (60.5%). Germs of pea were individually preserved with numerous concentrations of TiO2 NPs. An experience of TiO2 NPs (20%, 40%, 80% and 100%), as well as mechanisms that instigated momentous alterations in seed germinations, roots interval, shoot lengths, and antioxidant enzymes, were investigated. Associated with controls, the supreme seeds germinations, roots and plant growth were perceived with the treatments of TiO2 NPs. Super-oxide dis-mutase and catalase activities increased because of TiO2 NPs treatments. This advocates that TiO2 Nanoparticles may considerably change antioxidant metabolisms in seed germinations.

Influence of capillary tube length on the performance of domestic refrigerator with eco-friendly refrigerant R152a.

The household heating and cooling system often use the capillary device. The use of the helical capillary eliminates the need for lightweight refrigeration devices in the system. Capillary pressure is noticeably affected by the capillary geometric parameters, such as length, mean diameter, and pitch. This paper is concerned with the effects of the capillary length on the performance of the system. Three separate length capillary tubes were used in the experiment. The data on R152a were studied under various conditions to assess the impact of varying the length. Maximum COP is obtained at an evaporator temperature of - 12 °C and capillary length of 3.65 m. The result is drawn that the system performance enhances when the capillary length is improved to 3.65 m when compared to 3.35 m and 3.96 m. As a result, as the capillary length increases up to a specific amount, the system's performance improves. The findings from the experiment were compared with those from the computational fluid dynamics (CFD) analysis.

Investigation on Pollution Control Device (PCD) in iron foundry industry to reduce environmental chemicals.

Right from the olden days, many products have been made according to foundry practices in order to generate prosperity in the societies in which they operate while reaping these types of benefits through the operation of foundries. It is alarming that the emissions released by foundries affect human health. Therefore, foundries installed Pollution Control devices (PCDs), in accordance with this development; researchers examined the effectiveness of these PCDs in controlling emissions from foundries in different parts of the world. The emission control obtained by installing these PCDs is explained in this article based on the data gathered from the survey. The cartridge filter equipped with an induction furnace reduced the concentration of SPM to less than 20 mg/Nm3. This result of the investigation indicates that the cartridge filter built into the induction furnace achieves the best efficiency in controlling contaminants from iron foundries. Interestingly, the operation of the cartridge filter has yet to be documented. Therefore, the construction operation, the performance of the cartridge filter, and its efficiency in achieving contaminations control in foundries are described. This will provide useful information on the use of cartridge filters in an induction furnace to reduce Iron foundry emissions.

Reduction of environmental chemicals, toxicity and particulate matter in wet scrubber device to achieve zero emissions.

The fine particles generated by the foundry industry are present in the atmosphere; they have an impact on the climate because of their influence on atmospheric radioactive phenomena. As a result of this scenario, there is a rising amount of legislation restricting the emission of pollutants from foundry industries and related businesses. In response to this situation, many researchers have concentrated on end-of-pipe technologies, one of which is the wet scrubber, which is a device that is primarily used in foundries to control pollution and is one of the devices that has been incorporated. The disadvantage of using this wet scrubber, on the other hand, is that it contributes to secondary pollution when it is used. In order to combat secondary pollution, a model of an enhanced wet scrubber system that incorporates a multi-sand filtering technology was developed. The performance of this redesigned wet scrubber system was evaluated with the use of computational fluid dynamics (CFD) software. In CFD, the Reynolds stress model was applied for simulation. The pressure magnitudes and velocity magnitudes are obtained by this simulation. The volume fraction of the dust was evaluated through the DPM approach. Because of the introduction of the filtration tank's computation, it was discovered that successful filtration was accomplished using sand filters, meaning that environmental chemicals and particles were totally filtered from 0.17 kg at the entrance to zero kg of particles at the outflow.

Biological approach synthesis and characterization of iron sulfide (FeS) thin films from banana peel extract for contamination of environmental remediation.

Biological approach synthesis and characterization of Iron Sulfide (FeS) thin films from banana peel extract for contamination remediation of environment studied. Iron chloride, Sodium thiosulfate and Ethylene-di-amine-tetra acetate (EDTA) were used as precursor solutions without further purification. The nanoparticle of banana peel was extracted and prepared with synthesized FeS thin films and analyzed by X ray-diffraction for structural examination, Scanning electron microscope (SEM) for surface morphological analysis, Ultra-violet-visible-spectrometer (UV-Vis) and photo-luminescence spectro-photo-meter (P-L) for optical characterizations. XRD peaks are shown with recognized to (110), (200), (310), and (301) crystalline planes. The occurrence of this deflection peak are recognised the FeS crystal segment of the tetragonal crystalline systems. SEM micrographs of the films prepared biological method show the distribution of grains, which cover the surface of the substrate completely and are uniform and films deposited purely have defects. The photo-luminescence, absorbance, and transmittance strength of banana peel extract FeS thin film is greater than pure FeS thin films in which wide-ranging and symmetries groups were perceived. In the present study, the comparison of pure FeS thin films and Nano synthesized banana peel extract with FeS thin films was studied. It is observed that Nano synthesized banana fibre absorbs higher than pure FeS thin films in solar cell application. Finally, green synthesis is an ecofriendly, easy and cheap promising method for the fabrication of thin films for solar cell applications.