Blood Vessel Topography of the Feet in Selected Species of Birds of Prey and Owls.

Birds of prey and owls are susceptible to diseases of and traumatic injuries to their feet, which regularly require surgical intervention. A precise knowledge of the blood vessel topography is essential for a targeted therapy. Therefore, the metatarsal and digital vasculature was examined in eight species of birds of prey and owls. The study included contrast micro-computed tomography scans and anatomical dissections after intravascular injection of colored latex. In all examined species, the dorsal metatarsal arteries provided the main supply to the foot and their branching pattern and number differed between species. They continued distally as digital arteries. All examined species showed a basic pattern of four collaterally located digital blood vessels per toe: a prominent artery and small vein on one side and a small artery and prominent vein on the other side. Digital veins united to form common digital veins, most of which joined into a superficial, medially located metatarsal vein. This vein provided the main drainage of the foot. The detailed visualization of the topography of pedal blood vessels will help veterinary surgeons during surgical procedures. In addition, differences in the plantar arterial arch between hawks and falcons were discussed regarding their possible influence on the prevalence of pododermatitis (bumblefoot).

Ex Vivo Evaluation of the Cranial Tibial Artery and Its Compression through Fragment Rotation during Tibia Plateau Levelling Osteotomy: An Angiographic Three-Dimensional Reconstruction.

OBJECTIVE: To illustrate the arterial vascularity of the proximal tibia three-dimensionally and to evaluate the impact of fragment rotation on the cranial tibial artery by tibia plateau levelling osteotomy (TPLO). METHODS: Radiographic angiography and computed tomography (CT) were performed on 12 pelvic limbs from six large-breed canine cadavers before and after TPLO. Three-dimensional (3D) models of the stifle, including osseous and vascular structures, were obtained, and the integrity of the cranial tibial artery was assessed. Post-TPLO CT images were used to analyze compression of the cranial tibial artery by the rotated fragment. RESULTS: The uncompressed cranial tibial artery caliber, measured proximally and distally to the osteotomy, was 9.52 mm2 (6.07-18.90 mm2). In all adequately rotated fragments, the mean caliber of the artery on the level of the osteotomy was 1.57 mm2 (0.89-2.93 mm2) after TPLO. This represented a significant decrease of approximately 81%. Only slight cross-sectional area decrease (8.8%) was seen in one limb, which was revealed to have insufficient fragment rotation (2.83 mm). Another limb only showed signs of stretching of the artery (31.51%), which was under-rotated and medially displaced. Pre-TPLO 3D reconstructions were mainly consistent with previous anatomic studies except for the distance between tibial cortex and cranial tibial artery, which appeared closer. CONCLUSION: Sufficient fragment rotation leads to compression of the cranial tibial artery. Intraoperative hemorrhage can be caused by laceration of the main cranial tibial artery or by multiple small branches reaching craniolaterally.

Postoperative wound assessment in cattle: How reliable is the back hand palpation?

BACKGROUND: As part of clinical wound assessment in bovine surgery, discrepancies in skin temperature are evaluated by placing the back of the hand on the area to be examined. Generally, an increased skin temperature at the wound site for a prolonged period is considered as an indicator of impaired wound healing. The aim of this study was to verify the reliability of palpation under bovine practice conditions using laparotomy as an example. Fourteen cows (German Holstein) with a left displacement of the abomasum (LDA) without other severe concurrent diseases were examined preoperatively and once daily for ten days after surgery. The skin temperature of the wound site in the right flank was assessed by palpation, followed by thermographic evaluation using an infrared camera after a 45-min acclimatisation period, under standardised conditions in a closed examination room daily for 10 days. RESULTS: All the incisions healed without clinical detectable perturbances. The ambient temperature range during the study period was 7.8 - 24.1 °C. Two groups were retrospectively defined according to the ambient temperature: high ambient temperature (HT group; median: 20.2 °C 25/75 quartile: 18.5 °C / 21.7 °C; n = 6) and low ambient temperature (LT group; 10.8 °C; 9.4 °C / 12.8 °C; n = 8). The temperature differences (Δϑ) between the mean skin temperature of the wound site and a defined reference area cranial to the wound were assessed. A significant negative correlation was found between the ambient temperature (ϑAmb) and Δϑ (r=-0.51; P < 0.001). The Δϑ was postoperatively higher in the cows in the LT group (median of the individual animals 0.8-2.5 °C) than in the HT group (0.1-0.5 °C; P < 0.05). In contrast to the thermographic findings, manual palpation rarely detected local hyperthermia (> 1 °C) at the wound site (sensitivity 0.20; specificity 0.96). CONCLUSIONS: The infrared thermography provides a more reliable assessment of temperature changes at the wound site in comparison to manual palpation. The ambient temperature markedly affects the extent of local hyperthermia at the wound site.

Development of a three-dimensional computer model of the canine pelvic limb including cruciate ligaments to simulate movement.

Gait analysis as subjective visual assessment forms the foundation of the veterinarian's lameness examination. Pelvic limb lameness is frequently seen in dogs and the stifle joint with its cruciate ligaments, is a main cause of lameness due to cruciate ligament deficiency. In this study, we developed an open-source three-dimensional musculoskeletal pelvic limb model of a 30 kg Labrador Retriever including cruciate ligaments, simulating the gait cycle of the walking movement with the open-source programs NMSBuilder (Institutio Ortopedico Rizzoli, Bologna, Italy) and OpenSim (National Center for Simulation in Rehabilitation Research (NCSRR), Stanford, CA, USA). The computer model generated muscle activations based on motion data. The computed activations were similar to experimental electromyogram data. Highest joint torque was in extension/flexion in the stifle joint at 54 Nm at 14% of the gait cycle with cruciate ligaments. Highest stifle joint reaction force was 408 N at 16% of the gait cycle and was reduced after adding cruciate ligaments. Especially the cranial cruciate ligament loads up to 102 N (34% body weight). Cranial cruciate ligament forces increase with stifle extension and decrease with stifle flexion. On the contrary, the caudal cruciate ligament loads up to 27 N (9% body weight) during the swing phase with a flexed stifle joint. The model was validated with electromyogram data. The model's predictions are plausible because joint torques and forces match the applied ground reaction forces in curve progression and in timing. This model forms a basis for further investigations into stifle surgery after cruciate ligament deficiency.

Development of a zoomorphic test specimen for constancy testing on digital X-ray systems in veterinary radiology.

BACKGROUND: Technical failures and incorrect usage of digital X-ray systems may lead to a decreasing image quality, artefacts and a higher dose exposure of staff and patients. Although there are no regulations regarding constancy testing in veterinary radiology all operators are required to avoid unnecessary exposure. The aim of this study was to develop a reasonably inexpensive zoomorphic 3D-printed test specimen for constancy testing that allows the detection of changing image quality by visual analysis. Primarily, a calibration curve of the attenuation factor of the 3D-printing material (ZP150) was determined. MATLAB converted every pixel value of a thorax X-ray image of a Beagle dog into an equivalent thickness of printing material. The thickness distribution was printed using a 3D-printer. This printed test specimen was additionally provided with five thin aluminium discs to simulate lung nodules. To evaluate the usability for constancy testing 12 X-ray images of the test specimen were made. Two images (reference and control) were taken with the minimum dose in order to obtain images suitable for diagnosis purposes. Eight images were taken with a dose differing 30-140% from the reference dose by varying current-time product (mAs) or tube voltage (kVp). Two images were taken with the same parameters as the reference image but edited with different image processing. Six veterinarians (general practitioners) evaluated ten chosen structures in the X-ray images in a Visual Grading Analysis and scored the image quality of these structures for every image in comparison to the reference image. A Visual Grading Analysis Score was calculated and statistically analysed. RESULTS: A higher current-time product led to a negligibly better evaluation of the X-ray image. The lower the current-time product the worse the X-ray images were scored. Likewise, both increasing and decreasing of the tube voltage led to lower scores. CONCLUSIONS: A zoomorphic test specimen can be used for constancy testing of digital X-ray systems in veterinary medicine. Especially a lower dose can be recognised due to deviation in the image quality when compared to the reference image. The 3D-printed test specimen is less expensive than test equipment used in human medicine.

Evaluation of the static magnetic field interactions for a newly developed magnetic ophthalmic implant at 3 Tesla MRI. / Untersuchung der Wirkungen eines statischen Magnetfeldes auf ein neu-entwickeltes magnetisch ophthalmologisches Implantat in einem 3 Tesla MRT.

PURPOSE: The purpose of this study is to analyze the static magnetic field interactions for an ophthalmic-magnetic shunt implant with a ferromagnetic steel plate in a thin silicon layer. The plate is used for opening of a valve flap. Ten different sizes of this steel plate were investigated to characterize the relationship between the size of the metal and the magnetic forces of the static magnetic field of a 3.0 T MRI. MATERIALS AND METHODS: The magnetic translation force Fz was quantified by determining the deflection angle using the deflection angle test (ASTM F 2052). The torque was qualitatively estimated by using a 5-point grading scale (0: no torque; + 4: very strong torque) according to Sommer et al. 11. For the visual investigation of the function of the metal plate both prototypes were positioned at the magnetic field's spatial gradient and at the magnet's isocenter. The stitches were exposed to the thousandfold of the translational force by a dynamometer. RESULTS: The translational force was found to be 10 times greater than the weight of a single plate. The plates were exposed to a high torque (grade 3 to 4). The seams and the tissue withstood more than a thousandfold of the determined translational force. No spontaneous, uncontrolled opening of the valve flap was visible in the MRI, as a result of which the intraocular pressure could decrease considerably. CONCLUSION: Due to the small size of the plates the translational force and the torque will be compensated by the silicon layer and also by the fixation in the eye. KEY POINTS: · Magnetic forces will be compensated by silicon layer and fixation in the eye.. · The magnetic-ophthalmological implant is not restricted in its function by the MRI magnetic field.. · The ophthalmic magnetic shunt implant can be considered conditionally MRI-safe.. CITATION FORMAT: · Bodenstein A, Lüpke M, Seiler C et al. Evaluation of the static magnetic field interactions for a newly developed magnetic ophthalmic implant at 3 Tesla MRI. Fortschr Röntgenstr 2019; 191: 209 - 215.

Measurement of single kidney glomerular filtration rate in dogs using dynamic contrast-enhanced magnetic resonance imaging and the Rutland-Patlak plot technique.

BACKGROUND: Nephropathies are among the most common diseases in dogs. Regular examination of the kidney function plays an important role for an adequate treatment scheme. The determination of the glomerular filtration rate (GFR) is seen as the gold standard in assessing the kidney status. Most of the tests have the disadvantage that only the complete glomerular filtration rate of both kidneys can be assessed and not the single kidney glomerular filtration rate. Imaging examination techniques like dynamic contrast-enhanced magnetic resonance imaging have the potential to evaluate the single kidney GFR. There are studies in human medicine describing the determination of the single kidney GFR using this technique. To our knowledge there are no such studies for dogs. RESULTS: An exponential fit was found to describe the functional interrelation between signal intensity and contrast medium concentrations. The changes of contrast medium concentrations during the contrast medium bolus propagation were calculated. The extreme values of contrast medium concentrations in the kidneys were reached at nearly the same time in every individual dog (1st maximum aorta 8.5 s, 1st maximum in both kidneys after about 14.5 s; maximum concentration values varied between 17 and 125 µmol/mL in the aorta and between 4 and 15 µmol/mL in the kidneys). The glomerular filtration rate was calculated from the concentration changes of the contrast medium using a modified Rutland-Patlak plot technique. The GFR was 12.7 ± 2.9 mL/min m2 BS for the left kidney and 12.0 ± 2.2 mL/min/m2 BS for the right kidney. The mean values of the coefficient of determination of the regression lines were averagely 0.91 ± 0.08. CONCLUSIONS: The propagation of contrast medium bolus could be depicted well. The contrast medium proceeded in a similar manner for every individual dog. Additionally, the evaluation of the single kidney function of the individual dogs is possible with this method. A standardized examination procedure would be recommended in order to minimize influencing parameters.

Osteointegration of Porous Poly-ε-Caprolactone-Coated and Previtalised Magnesium Implants in Critically Sized Calvarial Bone Defects in the Mouse Model.

Metallic biomaterials are widely used in maxillofacial surgery. While titanium is presumed to be the gold standard, magnesium-based implants are a current topic of interest and investigation due to their biocompatible, osteoconductive and degradable properties. This study investigates the effects of poly-ε-caprolactone-coated and previtalised magnesium implants on osteointegration within murine calvarial bone defects: After setting a 3 mm × 3 mm defect into the calvaria of 40 BALB/c mice the animals were treated with poly-ε-caprolactone-coated porous magnesium implants (without previtalisation or previtalised with either osteoblasts or adipose derived mesenchymal stem cells), porous Ti6Al4V implants or without any implant. To evaluate bone formation and implant degradation, micro-computertomographic scans were performed at day 0, 28, 56 and 84 after surgery. Additionally, histological thin sections were prepared and evaluated histomorphometrically. The outcomes revealed no significant differences within the differently treated groups regarding bone formation and the amount of osteoid. While the implant degradation resulted in implant shifting, both implant geometry and previtalisation appeared to have positive effects on vascularisation. Although adjustments in degradation behaviour and implant fixation are indicated, this study still considers magnesium as a promising alternative to titanium-based implants in maxillofacial surgery in future.

Auditory functional magnetic resonance imaging in dogs--normalization and group analysis and the processing of pitch in the canine auditory pathways.

BACKGROUND: Functional magnetic resonance imaging (fMRI) is an advanced and frequently used technique for studying brain functions in humans and increasingly so in animals. A key element of analyzing fMRI data is group analysis, for which valid spatial normalization is a prerequisite. In the current study we applied normalization and group analysis to a dataset from an auditory functional MRI experiment in anesthetized beagles. The stimulation paradigm used in the experiment was composed of simple Gaussian noise and regular interval sounds (RIS), which included a periodicity pitch as an additional sound feature. The results from the performed group analysis were compared with those from single animal analysis. In addition to this, the data were examined for brain regions showing an increased activation associated with the perception of pitch. RESULTS: With the group analysis, significant activations matching the position of the right superior olivary nucleus, lateral lemniscus and internal capsule were identified, which could not be detected in the single animal analysis. In addition, a large cluster of activated voxels in the auditory cortex was found. The contrast of the RIS condition (including pitch) with Gaussian noise (no pitch) showed a significant effect in a region matching the location of the left medial geniculate nucleus. CONCLUSION: By using group analysis additional activated areas along the canine auditory pathways could be identified in comparison to single animal analysis. It was possible to demonstrate a pitch-specific effect, indicating that group analysis is a suitable method for improving the results of auditory fMRI studies in dogs and extending our knowledge of canine neuroanatomy.

Actinobacillus pleuropneumoniae challenge in swine: diagnostic of lung alterations by infrared thermography.

BACKGROUND: Actinobacillus pleuropneumoniae (A.pp.) is the causative agent of porcine pleuropneumonia leading to high economic losses in the pig industry. Infrared thermography (IRT) of the thorax might offer a new method to select swine with lung alterations for further diagnostics. In this study 50 german landrace pigs were infected with A.pp. in an established model for respiratory tract disease, while 10 healthy pigs served as control animals. To avoid drift errors during IR measurements absolute skin temperatures and temperature differences between a thoracal and an abdominal region were assessed for its diagnostic validity. RESULTS: IRT findings during the course of experimental A.pp.-infection were verified by computed tomography (CT) before and on days 4 and 21 after infection. Significant correlations were found between clinical scores, CT score and lung lesion score. Ambient temperature, body temperature and abdominal surface temperature were factors influencing the skin surface temperature of the thorax. On day 4 but not on day 21 after infection the right thoracal temperature was significantly higher and the difference between a thoracal region in the height of the left 10th vertebra and an abdominal region was significantly lower in infected pigs than in control pigs. At a cut off of 28°C of right thoracal temperature the specificity of the method was 100% (CI 95%: 69-100%) and the sensitivity 66% (CI 95%: 51-79%). At a cut off of 2°C temperature difference between thoracal and abdominal region on the left body site the specificity of the method was 100% (CI 95%: 69-100%) and the sensitivity 32% (CI 95%: 19-47%) with all control pigs detected negative. Orientation for lung biopsy by IRT resulted in 100% specificity and sensitivity (CI 95%: 69-100%) of bacteriological examination of tissue samples during the acute stage of infection. CONCLUSION: IRT might be a valuable tool for the detection of inflammatory lung alterations in pigs, especially during the acute stage of infection and if ambient temperatures are constant during individual measurements. External and internal factors interfere with this method, so that its application in the field might be restricted to a selection of pigs for further diagnostic with adequate specificity.

Intra-pulp temperature increase of equine cheek teeth during treatment with motorized grinding systems: influence of grinding head position and rotational speed.

BACKGROUND: In equine practice, teeth corrections by means of motorized grinding systems are standard procedure. The heat resulting from that treatment may cause irreparable damage to the dental pulp. It has been shown that a 5.5°C temperature rise may cause severe destruction in pulp cells. Hence, the capability to continuously form secondary dentine is lost, and may lead, due to equine-typical occlusal tooth abrasion, to an opening of the pulp cavity.To obtain reliable data on the intra-pulp increase in temperature during corrective treatments, equine cheek teeth (CT) were modified in a way (occlusal surface smoothed, apical parts detached, pulp horns standardized) that had been qualified in own former published studies. All parameters influencing the grinding process were standardized (force applied, initial temperatures, dimensions of pulp horns, positioning of grinding disk, rotational speed). During grinding experiments, imitating real dental treatments, the time span for an intra-pulp temperature increase of 5.5°C was determined. RESULTS: The minimum time recorded for an intra-pulp temperature increase of 5.5°C was 38 s in mandibular CT (buccal grinding, 12,000 rpm) and 70 s in maxillary CT (flat occlusal grinding, 12,000 rpm). The data obtained showed that doubling the rotational speed of the disk results in halving the time span after which the critical intra-pulp temperature increase in maxillary CT is reached. For mandibular CT, the time span even drops by two thirds. CONCLUSION: The use of standardized hypsodont CT enabled comparative studies of intra-pulp heating during the grinding of occlusal tooth surfaces using different tools and techniques. The anatomical structure of the natural vital hypsodont tooth must be kept in mind, so that the findings of this study do not create a deceptive sense of security with regard to the time-dependent heating of the native pulp.

Difference method for analysing infrared images in pigs with elevated body temperatures.

Infrared imaging proves to be a quick and simple method for measuring temperature distribution on the pig's head. The study showed that infrared imaging and analysis with a difference ROI (region of interest) method may be used for early detection of elevated body temperature in pigs (> 39.5°C). A high specificity of approx. 85% and a high sensitivity of 86% existed. The only prerequisite is that there are at least 2 anatomical regions which can be recognised as reproducible in the IR image. Noise suppression is guaranteed by averaging the temperature value within both of these ROI. The subsequent difference imaging extensively reduces the off-set error which varies in every thermal IR-image.

Three-dimensional anatomy of equine incisors: tooth length, enamel cover and age related changes.

BACKGROUND: Equine incisors are subjected to continuous occlusal wear causing multiple, age related changes of the extragingival crown. It is assumed that the occlusal wear is compensated by continued tooth elongation at the apical ends of the teeth. In this study, µCT-datasets offered the opportunity to analyze the three-dimensional appearance of the extra- and intraalveolar parts of the enamel containing dental crown as well as of the enamel-free dental root. Multiple morphometric measurements elucidated age related, morphological changes within the intraalveolar part of the incisors. RESULTS: Equine incisors possess a unique enamel cover displaying large indentations on the mesial and distal sides. After eruption tooth elongation at the apical end outbalances occlusal wear for two to four years resulting in increasing incisor length in this period of time. Remarkably, this maximum length is maintained for about ten years, up to a tooth age of 13 to 15 years post eruption. Variances in the total length of individual teeth are related to different Triadan positions (central-, middle- and corner incisors) as well as to the upper and lower arcades. CONCLUSION: Equine incisors are able to fully compensate occlusal wear for a limited period of time. However, after this ability ceases, it is expected that a diminished intraalveolar tooth length will cause massive changes in periodontal biomechanics. The time point of these morphodynamic and biomechanical changes (13 to 15 years post eruption) occurs in coincidence with the onset of a recently described destructive disease of equine incisor (equine odontoclastic tooth resorption and hypercementosis) in aged horses. However, further biomechanical, cell biological and microbiological investigations are needed to elucidate a correlation between age related changes of incisor morphology and this disease.

Functional magnetic resonance imaging of the ascending stages of the auditory system in dogs.

BACKGROUND: Functional magnetic resonance imaging (fMRI) is a technique able to localize neural activity in the brain by detecting associated changes in blood flow. It is an essential tool for studying human functional neuroanatomy including the auditory system. There are only a few studies, however, using fMRI to study canine brain functions. In the current study ten anesthetized dogs were scanned during auditory stimulation. Two functional sequences, each in combination with a suitable stimulation paradigm, were used in each subject. Sequence 1 provided periods of silence during which acoustic stimuli could be presented unmasked by scanner noise (sparse temporal sampling) whereas in sequence 2 the scanner noise was present throughout the entire session (continuous imaging). The results obtained with the two different functional sequences were compared. RESULTS: This study shows that with the proper experimental setup it is possible to detect neural activity in the auditory system of dogs. In contrast to human fMRI studies the strongest activity was found in the subcortical parts of the auditory pathways. Especially sequence 1 showed a high reliability in detecting activated voxels in brain regions associated with the auditory system. CONCLUSION: These results indicate that fMRI is applicable for studying the canine auditory system and could become an additional method for the clinical evaluation of the auditory function of dogs. Additionally, fMRI is an interesting technique for future studies concerned with canine functional neuroanatomy.

Periodontal biomechanics: finite element simulations of closing stroke and power stroke in equine cheek teeth.

BACKGROUND: In equine dentistry periodontal diseases, especially periapical inflammation, are frequently occurring problems. Anachoresis is believed to be the most common cause for the development of such disorders. Nevertheless, there is still no substantiated explanation why settlement of pathogen microorganisms occurs in equine periodontal tissues. It is expected that excessive strains and stresses occurring in the periodontal ligament (PDL) during the horse's chewing cycle might be a predisposing factor. In this study this assumption was examined by finite element (FE) analyses on virtual 3-D models of equine maxillary and mandibular cheek teeth, established on the basis of µCT datasets. Calculations were conducted both under conditions of closing and power stroke. RESULTS: Results showed a uniform distribution of low stresses and strain energy density (SED) during closing stroke, whereas during power stroke an occurrence of high stresses and SED could be observed in the PDL near the alveolar crest and in periapical regions. CONCLUSION: The concentration of forces during power stroke in these specific areas of the PDL may cause local tissue necrosis and inflammation and thus establish a suitable environment for the settlement of microorganisms.

[Influence of exercise on horses' limb volume, measured by an optoelectronic device]. / Experimentelle Untersuchung zum Einfluss definierter Bewegung auf das Volumen der Pferdeextremität anhand optoelektronischer Messungen.

This study tested for the first time an optoelectronic device (Perometer*) measuring limb volume of horses. An analysis of its application was performed regarding the influence of different types of physical exercise on the volume of the extremities. 40 horses were divided into four groups often horses, each group being exposed to exercise, differing in kind and duration of lunging, horse-ridden and riderless. The volume measurement was performed by determining the inactive value (I) after a twelfe-hour standing period, the load value (II) immediately after exercise and recovery value (III) one hour after exercise. The results showed a highly significant decrease in limb volume of 5.7% between values (I) and (II), as well as a highly significant increase of 68% between (II) and (III). The volume changes observed in male horses were significantly higher than in female horses. Volume changes in horse-ridden groups were higher than riderless ones, but not significant. There were fewer leg volume changes at low ambient temperatures (1-12 degrees C) compared to high temperatures (23-31 degrees C), but these were not statistically significant. Well-trained horses showed lower volume changes than less trained horses (not statistically significant). The Perometer is a fast and reliable tool for measuring limb volume of horses. The ICC (Interclass Correlation Coefficient) calculated a high measurement reproducibility of 0.996. A variance analysis showed no significant differences between the three repeated leg measurements. Thus, the Perometer can be used for monitoring and quantifying edema and documenting limb volume changes resulting from training, wearing compression stockings or bandages, manual lymph drainage.

Phantom and cadaver measurements of dose and dose distribution in micro-CT of the chest in mice.

BACKGROUND: Micro-computed tomography (CT) allows high-resolution imaging of the chest in mice for small animal research with a significant radiation dose applied. PURPOSE: To report on measurement of the applied radiation dose using different scan protocols in micro-CT of the chest in mice. MATERIAL AND METHODS: Repetitive dose measurements were performed for four different micro-CT protocols (with/without respiratory gating) and for micro-CT fluoroscopy used for chest imaging. Measurements were carried out using thermoluminescence dosimeters (TLD) in mouse cadavers and in a PMMA phantom allowing measurement of the radiation dose in the direct path of rays and assessment of scattered radiation. RESULTS: The dose measured inside and outside the chests of the cadavers varied between 190 und 210 mGy, respectively. The expected mean doses in mice in the direct path of rays for the four examined micro-CT protocols varied between 170 and 280 mGy. The mean values for 1 and 5 minutes of fluoroscopy were 17 mGy and 105 mGy, respectively. CONCLUSION: The measured dose values are similar to the dose values for micro-CT of the chest reported so far. A relevant dose can be delivered by micro-CT of the chest, which could possibly interact with small animal studies. Therefore, the applied dose for a specific protocol should be known and adverse radiation effects be considered.

Optimising magnetic resonance image quality of the ear in healthy dogs.

The aim of this study was to develop an examination protocol for magnetic resonance imaging, in order to display diagnostically important information of the canine middle and inner ear. To ensure that this protocol could also be used as a basis for determining pathological changes, the anatomical structures of the ear were presented in detail. To minimise stress through anaesthesia in live animals, preliminary examinations were carried out on four dog cadavers. During these initial examinations, three-dimensional (3D) sequences proved to be superior to two-dimensional ones. Therefore, only 3D sequences were applied for the main examinations performed on six clinically healthy Beagles. The anonymised MR images were rated by three experienced reviewers using a five-point scale. The most valuable sequence was a T2-weighted CISS sequence (TR = 16.7 ms, TE = 8.08 ms). This sequence proved to be most suitable for illustrating the inner ear structures and enabled good tissue contrasts. The sequence ranked second best was also a T2-weighted DESS sequence (TR = 19 ms, TE = 6 ms), allowing the imaging of the tympanic cavity and enabling 3D reconstruction due to its isotropic voxels. Due to low contrast and strong noise, the other sequences (TSE, FISP, MP RAGE) were not suitable for anatomical illustration of the middle and inner ear.

Modulation of neurogenesis by targeted hippocampal irradiation fails to affect kindling progression.

Changes in the rate of dentate granule cell neurogenesis and in the fate of newborn granule cells have been implicated in the development and progression of epilepsies. Strategies to normalize neurogenesis in chronic epilepsy models are thought to increase our understanding of the functional consequences of aberrant neurogenesis in the epileptic brain. Therefore, we modulated neurogenesis in an amygdala kindling paradigm in rats by targeted irradiation of the hippocampus using a medical linear accelerator device. Selective irradiation normalized the hippocampal cell proliferation rate in kindled animals. Both, in kindled and nonkindled rats the number of BrdU/NeuN-labeled newborn neurons was reduced in response to irradiation. Whereas kindling resulted in a pronounced increase in the number of neuroblasts identified based on doublecortin-labeling, irradiation prevented the expansion of the neuroblast population. Moreover, irradiation counteracted the kindling-associated increase in hilar basal dendrites, and kept the fraction of cells with basal dendrites at control levels. Despite the efficacious modulation of neurogenesis, irradiation did not affect the rate of kindling progression. Both, the number of stimulations as well as the cumulative afterdischarge duration to reach respective seizure stages were comparable in animals with and without irradiation. In addition, pre- and postkindling thresholds as well as seizure parameters recorded at threshold stimulation remained unaffected by irradiation. In conclusion, the fact that the efficacious modulation of neurogenesis by irradiation did not exert any effects on kindling acquisition and kindled seizures suggests that newborn neurons do not critically contribute to the hyperexcitable state in the chronic epilepsy model used.

[Optimising MR image quality of the canine nose]. / Optimierung der Bildqualität bei der MR-Darstellung der Hundenase.

The aim of this study was to optimize magnetic resonance imaging (MRI) sequences, which are already used for examinations of dog noses, to show more detail of the fine structures of the nose. Examinations were first carried out on phantoms. The resulting improved sequence parameters were further optimized on five clinically healthy animals. Images were made using nine optimized sequences on another five clinically healthy dogs, and the image quality was evaluated by three reviewers. Detail recognition and contour sharpness of the conchae and turbinates in the peripheral and central regions were evaluated as were image noise, contrast, subjective image quality, and diagnostic value. The best evaluation was given to a spin echo sequence. Second place went to a turbo spin echo sequence. Both sequences were proton density-weighted. The gradient echo sequences received the poorest evaluation and proved to be unsuitable for the anatomic portrayal of the nose. The TSE-sequence is more suitable to the clinical routine because of the significant shorter measure time compared to the SE-sequence. In case of suspected pathologic changes, a T2-weighted image sequence must also always be acquired, despite it being inappropriate to illustrate anatomic details.