Measurements of extinct fission products in nuclear bomb debris: Determination of the yield of the Trinity nuclear test 70 y later.

This paper describes an approach to measuring extinct fission products that would allow for the characterization of a nuclear test at any time. The isotopic composition of molybdenum in five samples of glassy debris from the 1945 Trinity nuclear test has been measured. Nonnatural molybdenum isotopic compositions were observed, reflecting an input from the decay of the short-lived fission products (95)Zr and (97)Zr. By measuring both the perturbation of the (95)Mo/(96)Mo and (97)Mo/(96)Mo isotopic ratios and the total amount of molybdenum in the Trinity nuclear debris samples, it is possible to calculate the original concentrations of the (95)Zr and (97)Zr isotopes formed in the nuclear detonation. Together with a determination of the amount of plutonium in the debris, these measurements of extinct fission products allow for new estimates of the efficiency and yield of the historic Trinity test.

Alcohol addition to acetonitrile activated by the [Re6(mu3-Se)8]2+ cluster core.

The addition of methanol and ethanol to the previously reported cluster solvates [Re6(mu3-Se)8(PEt3)5(MeCN)](SbF6)2 and trans-[Re6(mu3-Se)8(PEt3)4(CH3CN)2][SbF6]2 afforded three cluster complexes with imino ester ligands: {Re6(mu3-Se)8(PEt3)5[HN=C(OCH3)(CH3)]}(SbF6)2, {Re6(mu3-Se)8(PEt3)5[HN=C(OCH2CH3)(CH3)]}{SbF6}2, and trans-{Re6(mu3-Se)8(PEt3)4[HN=C(OCH3)(CH3)]2}{SbF6}2. In all cases, predominant formation of the Z isomers was observed.

Dendritic arrays of [Re6(mu3-Se)8]2+ core-containing clusters: exploratory synthesis and electrochemical studies.

The reaction between the previously reported site-differentiated cluster solvate [Re(6)(mu(3)-Se)(8)(PEt(3))(5)(MeCN)](SbF(6))(2) (1) with pyridyl-based ditopic ligands 4,4'-trimethylenedipyridine (2), 1,2-bis(4-pyridyl)ethane (3), and (E)-1,2-bis(4-pyridyl)ethene (4) afforded cluster complexes of the general formula [Re(6)(mu(3)-Se)(8)(PEt(3))(5)(L)](SbF(6))(2) (5-7), where L represents one of the pyridyl-based ligands. Reacting these cluster complex-based ligands with the fully solvated cluster complex [Re(6)(mu(3)-Se)(8)(MeCN)(6)](SbF(6))(2) (8) produced dendritic arrays of the general formula {Re(6)(mu(3)-Se)(8)[Re(6)(mu(3)-Se)(8)(PEt(3))(5)(L)](6)}(SbF(6))(14) (9-11), each featuring six circumjacent [Re(6)(mu(3)-Se)(8)(PEt(3))(5)](2+) units bridged to a [Re(6)(mu(3)-Se)(8)](2+) core cluster by the pyridyl-based ligands. Electrochemical studies using a thin-layer electrochemical cell revealed cluster-based redox events in these cluster arrays. For 9 (L = 2), one reversible oxidation event corresponding to the removal of 7 electrons was observed, indicating noninteraction or extremely weak interactions between the clusters. For 10 (L = 3), two poorly resolved oxidation waves were found. For 11 (L = 4), two reversible oxidation events, corresponding respectively to the removal of 1 and 6 electrons, were observed with the 1-electron oxidation event occurring at a potential 150 mV more positive than the 6-electron oxidation. These electrochemical studies suggest intercluster coupling in 11 via through-bond electronic delocalization, which is consistent with electronic spectroscopic studies of this same molecule.

Organic crystal engineering with 1,4-piperazine-2,5-diones. 6. Studies of the hydrogen-bond association of cyclo[(2-methylamino-4,7-dimethoxyindan-2-carboxylic acid)(2-amino-4,7-dimethoxyindan-2-carboxylic acid)].

[structure: see text] The title 1,4-piperazine-2,5-dione was synthesized in 23% yield over six steps from ethyl 2-amino-4,7-dimethoxyindan-2-carboxylate. Crystallization by slow diffusion of ether into a chloroform solution and by slow evaporation of an ethanol-chloroform-benzene solution produced polymorphic crystalline forms as determined by single-crystal X-ray analysis. The polymorphs exhibited different hydrogen-bonding networks. The association of this piperazinedione in solution was studied using mass spectrometric and nuclear magnetic resonance spectroscopic techniques. The MS and NMR data were interpreted using the solid-state structures as models for solution aggregation. Association constants extracted from the NMR data are in line with those of other cyclic cis amides in chloroform solvent.

Three new phases in the K/Cu/Th/S system: KCuThS3, K2Cu2ThS4, and K3Cu3Th2S7.

Synthetic exploration of K/Cu/Th/S quaternary phase space has yielded three new compounds: KCuThS3 (I), K2Cu2ThS4 (II), and K3Cu3Th2S7 (III). All three phases are semiconductors with optical band gaps of 2.95, 2.17, and 2.49 eV(I-III). Compound I crystallizes in the orthorhombic space group Cmcm with a = 4.076(1) A, b = 13.864(4) A, and c = 10.541(3) A. Compound II crystallizes in the monoclinic space group C2/m with a = 14.522(1) A, b = 4.026(3) A, and c = 7.566(6) A; beta = 109.949(1) degrees . Compound III crystallizes in orthorhombic space group Pbcn with a = 4.051(2) A, b = 14.023(8) A, and c = 24.633(13) A. The compounds are all layered materials, with each layer composed of threads of edge-sharing ThS6 octahedra bridged by CuS4 tetrahedral threads of varying dimension. The layers are separated by well-ordered potassium ions. The relatively wide range of optical band gaps is attributed to the extent of the CuS4 motifs. As the dimension of the CuS4 chains increases, band gaps decrease in the series. All materials were characterized by single-crystal X-ray diffraction, microprobe chemical analysis, and diffuse reflectance spectroscopy (NIR-UV).

Ligand-bridged oligomeric and supramolecular arrays of the hexanuclear rhenium selenide clusters--exploratory synthesis, structural characterization, and property investigation.

Transition metal clusters, by virtue of their well-defined structures and unique properties, present themselves as an attractive class of structural and functional building blocks for molecular and supramolecular construction. Summarized in this Account are highlights of our efforts utilizing face-capped octahedral [Re(6)(mu(3)-Se)(8)](2+) clusters as the fundamental building units to create a wide variety of preprogrammed architectures. These include molecular "Tinkertoys", featuring stereospecific cluster units bridged by multitopic ligands and extended arrays of clusters engineered via hydrogen bonding and secondary metal-ligand coordination.

Hydrogen-bonded extended arrays of the [Re6(mu3-Se)8]2+ core-containing clusters.

Site-differentiated solvated clusters of the general formula [Re(6)(mu(3)-Se)(8)(PEt(3))(n)(MeCN)(6)(-)(n)](SbF(6))(2) (n = 4, cis and trans; n = 5) undergo ligand substitution reaction with isonicotinamide to afford the corresponding amide derivatives, [Re(6)(mu(3)-Se)(8)(PEt(3))(n)(isonicotinamide)(6)(-)(n)](2+) [1 (n = 5); 2 (n = 4, trans); 3 (n = 4, cis)]. Retention of stereochemistry in each case was confirmed by (1)H and (31)P NMR. The solid-state structures of all three compounds were established crystallographically, which revealed self-complementary hydrogen-bonding interactions between adjacent cluster units. While complex 1 exists as hydrogen-bonded dimers in the solid state, compounds 2 and 3 form one-dimensional chains of clusters bridged by paired hydrogen bonds. It is the rigid stereochemistry of the cluster, combined with the classic crystal engineering motif of complementary N-H.O amide hydrogen bonding, that affords the predictable solid-state structures and dimensionality.

New oxovanadium bis(1,2-dithiolate) compounds that mimic the hydrogen-bonding interactions at the active sites of mononuclear molybdenum enzymes.

Reaction of VO(acac)(2) with 1,2-dithiols in the presence of triethylamine gives pentacoordinate oxovanadium complexes [HNEt(3)](2)[VO(bdt)(2)] (1), [HNEt(3)](2)[VO(tdt)(2)] (2), and [HNEt(3)](2)[VO(bdtCl(2))(2)] (3) (where H(2)bdt = 1,2-benzenedithiol, H(2)tdt = 3,4-toluenedithiol, and H(2)bdtCl(2) = 3,6-dichloro-1,2-benzenedithiol). Compounds 1-3 have been characterized by IR, UV/visible, EPR, and mass spectroscopies. The X-ray crystal stuctures of 1 and 2 show hydrogen-bonding interactions between the terminal oxo atom and triethylammonium counterions and between ligand sulfur atoms and the counterions. These interactions are comparable with those found at the active sites of mononuclear molybdenum enzymes.

Novel concentration-driven structural interconversion in shape-specific solids supported by the octahedral [Re(6)(mu3-Se)8]2+ cluster core.

A complex containing the face-capped octahedral [Re(6)(mu(3)-Se)(8)](2+) cluster core, cis-[Re(6)(mu(3)-Se)(8)(PPh(3))(4)(4,4'-dipyridyl)(2)](SbF(6))(2) (1), is used as a ditopic ligand with an enforced right angle between the two 4,4'-dipyridyl moieties for the coordination of Cd(2+) ion. Two coordination polymers, [[Re(6)(mu(3)-Se)(8)(PPh(3))(4)(4,4'-dipyridyl)(2)](2)[Cd(NO(3))(2)]](SbF(6))(4).21C(4)H(10)O.21CH(2)Cl(2) (2) and [[Re(6)(mu(3)-Se)(8)(PPh(3))(4)(4,4'-dipyridyl)(2)][Cd(NO(3))(3)]](NO(3)).2C(4)H(10)O.CH(2)Cl(2) (3), are obtained. The relative concentration of Cd(2+) determines which species is isolated, and the conversion of the first structure into the second is demonstrated experimentally.

Built to order: molecular tinkertoys from the [Re(6)(mu(3)-Se)(8)](2+) clusters.

Ligand substitution of [Re(6)(mu(3)-Se)(8)(PEt(3))(5)(CH(3)CN)](SbF(6))(2) (1) with pyridyl-based ligands, 2,4,6-tri-4-pyridyl-1,3,5-triazine (L1) and 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (L2), produced respectively the star-shaped tricluster (T1) and tetracluster (T2) arrays, wherein three (T1) and four (T2) units of the [Re(6)(mu(3)-Se)(8)](2+) core-containing clusters are interconnected by the corresponding bridging ligands. These novel supramolecular assemblies were characterized by a combination of NMR ((1)H and (31)P) spectroscopy, ESI-MS, and microanalysis. The molecular and solid-state structures of T1 have also been established by single-crystal X-ray diffraction.

Halide-templated assembly of polynuclear lanthanide-hydroxo complexes.

A series of pentadecanuclear lanthanide-hydroxo complexes possessing a common core of the formula [Ln(15)(mu(3)-OH)(20)(mu(5)-X)](24+)(1, Ln = Eu, X = Cl(-); 2, Ln = Nd, X = Cl(-); 3, Ln = Gd, X = Cl(-); 4, Ln = Pr, X = Br(-); 5, Ln = Eu, X = Br(-)) were prepared by L-tyrosine-controlled hydrolysis of corresponding lanthanide perchlorates in the presence of added Cl(-) or Br(-). The cationic cluster core comprises five vertex-sharing cubane-like [Ln(4)(mu(3)-OH)(4)](8+) units centered on the halide template. In the case of templating I(-), dodecanuclear complexes were isolated instead. The core component, [Ln(12)(mu(3)-OH)(16)(I)(2)](18+) (6, Ln = Dy; 7, Ln = Er), consists of four vertex-sharing cubane-like [Ln(4)(mu(3)-OH)(4)](8+) units and exists as a square-shaped cyclic structure with one I(-) located on each side of the square plane. An analogous hydrolytic reaction involving Er(NO(3))(3), L-tyrosine, and NaOH affords the known hexanuclear complex [Er(6)(mu(6)-O)(mu(3)-OH)(8)(NO(3))(6)(H(2)O)(12)](NO(3))(2) whose core component is a face-capped octahedral [Er(6)(mu(6)-O)(mu(3)-OH)(8)](8+) cluster with an interstitial mu(6)-oxo group (Wang, R.; Carducci, M. D.; Zheng, Z. Inorg. Chem. 2000, 39, 1836-1837.). The efficient self-assembly of halide-encapsulating multicubane complexes (1-7) and the inability to produce an analogous nitrate-containing complex demonstrate the superior templating roles played by the halide ion(s). Further credence for the halide template effects was provided by the isolation of the cationic pentadecanuclear complex 3 as the sole product when tyrosine-supported hydrolysis of Gd(NO(3))(3) was carried out in the presence of competitive Cl(-). Magnetic moments of complexes 1-7 measured at room temperature by using Evans' method are in excellent agreement with those calculated by the Van Vleck equation, assuming magnetically noninteractive lanthanide ions.