Microfabricated bioelectrodes on self-expandable NiTi thin film devices for implants and diagnostic instruments.

State of the art minimally invasive treatments and diagnostics of neurological and cardiovascular diseases demand for flexible instruments and implants that enable sensing and stimulation of bioelectric signals. Besides medical applications, implantable bioelectronic brain-computer interfaces are envisioned as the next step in communication and data transfer. Conventional microelectrode arrays used for these types of applications are based on polymer substrates that are not suitable for biostable, rigid and self-expanding devices. Here, we present fully integrated bioelectrodes on superelastic NiTi carriers fabricated by microsystem technology processes. The insulation between the metallic NiTi structure and the Pt electrode layer is realized by different oxide layers (SiOx, TaOx and Yttrium stabilized Zirconia YSZ). Key properties of bioelectronic implants such as dissolution in body fluids, biocompatibility, mechanical properties and bioelectrical sensing/stimulation capabilities have been investigated by in vitro methods. Particular devices with YSZ are biostable and biocompatible, enabling sensing and stimulation. The major advantage of this system is the combination of medically approved materials and novel fabrication technology that enables miniaturization and integration beyond the state-of-the-art processes. The results demonstrate that this functionalization of superelastic NiTi is an enabling technology for the development of new kinds of bioelectronic devices.

Cell adhesion on NiTi thin film sputter-deposited meshes.

Scaffolds for tissue engineering enable the possibility to fabricate and form biomedical implants in vitro, which fulfill special functionality in vivo. In this study, free-standing Nickel­Titanium(NiTi) thin film mesheswere produced by means of magnetron sputter deposition.Meshes contained precisely defined rhombic holes in the size of 440 to 1309 µm2 and a strut width ranging from 5.3 to 9.2 µm. The effective mechanical properties of the microstructured superelastic NiTi thin film were examined by tensile testing. These results will be adapted for the design of the holes in the film. The influence of hole and strut dimensions on the adhesion of sheep autologous cells (CD133+) was studied after 24 h and after seven days of incubation. Optical analysis using fluorescence microscopy and scanning electron microscopy showed that cell adhesion depends on the structural parameters of the mesh. After 7 days in cell culture a large part of the mesh was covered with aligned fibrous material. Cell adhesion is particularly facilitated on meshes with small rhombic holes of 440 µm2 and a strut width of 5.3 µm. Our results demonstrate that free-standing NiTi thin film meshes have a promising potential for applicationsin cardiovascular tissue engineering, particularly for the fabrication of heart valves.

Bioactive compounds immobilized on Ti and TiNbHf: AFM-based investigations of biofunctionalization efficiency and cell adhesion.

Implant materials require optimal biointegration, including strong and stable cell-material interactions from the early stages of implantation. Ti-based alloys with low elastic modulus are attracting a lot of interest for avoiding stress shielding, but their osseointegration potential is still very low. In this study, we report on how cell adhesion is influenced by linear RGD, cyclic RGD, and recombinant fibronectin fragment III8-10 coated on titanium versus a novel low-modulus TiNbHf alloy. The bioactive molecules were either physisorbed or covalently coupled to the substrates and their conformation on the surfaces was investigated with atomic force microscopy (AFM). The influence of the different bioactive coatings on the adhesion of rat mesenchymal stem cells was evaluated using cell culture assays and quantitatively analyzed at the single cell level by AFM-based single-cell force spectroscopy. Our results show that bioactive moieties, particularly fibronectin fragment III8-10, improve cell adhesion on titanium and TiNbHf and that the covalent tethering of such molecules provides the most promising strategy to biofunctionalize these materials. Therefore, the use of recombinant protein fragments is of high importance for improving the osseointegration potential of implant materials.

Cell adhesion strength is controlled by intermolecular spacing of adhesion receptors.

Spatial patterning of biochemical cues on the micro- and nanometer scale controls numerous cellular processes such as spreading, adhesion, migration, and proliferation. Using force microscopy we show that the lateral spacing of individual integrin receptor-ligand bonds determines the strength of cell adhesion. For spacings > or = 90 nm, focal contact formation was inhibited and the detachment forces as well as the stiffness of the cell body were significantly decreased compared to spacings < or = 50 nm. Analyzing cell detachment at the subcellular level revealed that rupture forces of focal contacts increase with loading rate as predicted by a theoretical model for adhesion clusters. Furthermore, we show that the weak link between the intra- and extracellular space is at the intracellular side of a focal contact. Our results show that cells can amplify small differences in adhesive cues to large differences in cell adhesion strength.