Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 2 de 2
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Gels ; 8(5)2022 May 19.
Artigo em Inglês | MEDLINE | ID: mdl-35621615

RESUMO

The current trend is represented by replacing solid fats with structured liquid oil while maintaining the plastic properties of food products. In this study, the behavior of refined sunflower oil structured with various agents (carnauba wax-CRW, ß-sitosterol:beeswax-BS:BW, ß-sitosterol:lecithin-BS:LEC, and glycerol monostearate-GM) was evaluated in the process dynamics of oleogel-based tender dough products. The oleogel with the mixture of ß-sitosterol:beeswax (OG_BS:BW) displayed the highest capacity to retain oil inside the matrix with a percentage of oil loss as low as 0.05% and also had a significantly higher hardness (6.37 N) than the reference, a commercial margarine (MR-3.58 N). During cooling from 90 to 4 °C, the increase in oleogel' viscosity results from oleogelator's liquid-solid phase transition. As demonstrated by the frequency sweeps performed, storage modulus G' was higher than loss modulus G″, no cross-over points were observed, and the strongest gel network was for the oleogel with glycerol monostearate (OG_GM). Regarding the dough, the sample prepared using the oleogel with carnauba wax (D_CRW) showed the strongest hardness (92.49 N) compared to the reference (D_MR-21.80 N). All the oleogel-containing doughs had elastic solid-like behavior. The samples with margarine (D_MR) and the mixture of ß-sitosterol:lecithin (D_BS:LEC) presented the lowest value of both moduli of G' and G" during the frequency sweep. The biscuits formulated with commercial margarine (B_MR) registered a hardness of 28.74 N. Samples with oleogels showed a specific tenderness for tender dough products, thus being suitable for this type of product (11.22-20.97 N).

2.
Curr Microbiol ; 78(8): 3246-3257, 2021 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-34232363

RESUMO

The high phenolic content of Palm Oil Mill Effluent (POME) constitutes an environmental concern. In this study, laccase producing microorganisms were isolated from POME samples collected in Côte d'Ivoire for their possible use in POME treatment. Strain showing the highest laccase activity was identified by ITS1-5.8S-ITS2 region sequencing as Trametes polyzona. A maximum laccase production (156.3 U/mL) was obtained after 10 days of incubation under shaking condition, at 37 °C, pH 4, with starch (1%), tryptone (0.3%) and 10 mM of guaiacol. The partially purified laccase of 31 kDa exhibited maximum activity at 50 °C and pH 4.5 with a Km for guaiacol and Vmax of 0.7 mM and 0.04 mM/min, respectively. Metals, SDS and EDTA did not inhibit his activity. Used as biotreatment agent, T. polyzona MPS1-3 reduced COD, total suspended solids, total solids and total phenolics by 16.03%, 70.15%, 38.9%, 50.84%, respectively, for sterilized POME and by 13.09%, 58.07%, 36.53%, 42.05% for unsterilized POME. These results showed the promising application of T. polyzona for bioremediation of phenolics compounds in wastewater and it potentially useful in several other biotechnological applications.


Assuntos
Lacase , Trametes , Resíduos Industriais/análise , Isoenzimas , Óleo de Palmeira , Óleos de Plantas , Polyporaceae
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...