Halide Complexes of 5,6-Dicyano-2,1,3-Benzoselenadiazole with 1 : 4 Stoichiometry: Cooperativity between Chalcogen and Hydrogen Bonding.

The [M4 -Hal]- (M=the title compound; Hal=Cl, Br, and I) complexes were isolated in the form of salts of [Et4 N]+ cation and characterized by XRD, NMR, UV-Vis, DFT, QTAIM, EDD, and EDA. Their stoichiometry is caused by a cooperative interplay of σ-hole-driven chalcogen (ChB) and hydrogen (HB) bondings. In the crystal, [M4 -Hal]- are connected by the π-hole-driven ChB; overall, each [Hal]- is six-coordinated. In the ChB, the electrostatic interaction dominates over orbital and dispersion interactions. In UV-Vis spectra of the M+[Hal]- solutions, ChB-typical and [Hal]- -dependent charge-transfer bands are present; they reflect orbital interactions and allow identification of the individual [Hal]- . However, the structural situation in the solutions is not entirely clear. Particularly, the UV-Vis spectra of the solutions are different from the solid-state spectra of the [Et4 N]+ [M4 -Hal]- ; very tentatively, species in the solutions are assigned [M-Hal]- . It is supposed that the formation of the [M4 -Hal]- proceeds during the crystallization of the [Et4 N]+ [M4 -Hal]- . Overall, M can be considered as a chromogenic receptor and prototype sensor of [Hal]- . The findings are also useful for crystal engineering and supramolecular chemistry.

Tuning Molecular Electron Affinities against Atomic Electronegativities by Spatial Expansion of a π-System.

2,1,3-Benzochalcogenadiazoles C6 R4 N2 E (E/R; E=S, Se, Te; R=H, F, Cl, Br, I) and C6 H2 R2 N2 E (E/R'; E=S, Se, Te; R=Br, I) are 10π-electron hetarenes. By CV/EPR measurements, DFT calculations, and QTAIM and ELI-D analyses, it is shown that their molecular electron affinities (EAs) increase with decreasing Allen electronegativities and electron affinities of the E and non-hydrogen R (except Cl) atoms. DFT calculations for E/R+e⋅- →[E/R]⋅- electron capture reveal negative ΔG values numerically increasing with increasing atomic numbers of the E and R atoms; positive ΔS has a minor influence. It is suggested that the EA increase is caused by more effective charge/spin delocalization in the radical anions of heavier derivatives due to contributions from diffuse (a real-space expanded) p-AOs of the heavier E and R atoms; and that this counterintuitive effect might be of the general character.

Acid-Base and Anion Binding Properties of Tetrafluorinated 1,3-Benzodiazole, 1,2,3-Benzotriazole and 2,1,3-Benzoselenadiazole.

The influence of fluorination on the acid-base properties and the capacity of structurally related 6-5 bicyclic compounds - 1,3-benzodiazole 1, 1,2,3-benzotriazole 2 and 2,1,3-benzoselenadiazole 3 to σ-hole interactions, i. e. hydrogen (1 and 2) and chalcogen (3) bondings, is studied experimentally and computationally. The tetrafluorination increases the Brønsted acidity of the diazole and triazole scaffolds and the Lewis acidity of selenadiazole scaffold decreases the basicity. Increased Brønsted acidity facilitates anion binding via the formation of hydrogen bonds; particularly, tetrafluorinated derivative of 1 (compound 4) binds Cl- . Increased Lewis acidity of tetrafluorinated derivative of 3 (compound 10), however, is not enough for binding with Cl- and F- via chalcogen bonds in contrast to previously studied Te analog of 10. It is suggested that the maximum positive values of molecular electrostatic potential at the σ-holes, VS,max , can be a reasonable metric for design and synthesis of new anion receptors with selenadiazole-diazole/triazole hybrids as a special target. Related chlorinated compounds are also discussed.

Electrorheological Behavior of Suspensions of Polyimide-Based on the Sodium Salt of 2,5-Diaminobenzenesulfonic Acid.

Electrorheological suspensions (ERS) of polyimide particles with organoelement fragments from the sodium salt of 2,5-diaminobenzene sulfonic acid were obtained for the first time. Their rheological and electrorheological characteristics, their dependence on the parameters of deformation, and the intensity of the external electric field were studied. It was found that the ERS of PI-Na polyimide particles have a significant electrorheological response. Solid-polyimide materials were previously studied using a scanning electron microscope. The effect of the polyimide concentration on the properties of the solution was studied by spectrophotometry. It was shown that polyimide suspension is a result of increasing intensity as the electric field changes the flow type from Newtonian to pseudoplastic due to polarization of the particles and formation of the chain structures along the power lines of the electric field. The influence of temperature on the change of rheological and electrorheological properties of a polyimide ERS in constant electric fields was investigated.

3D molecular network and magnetic ordering, formed by multi-dentate magnetic couplers, bis(benzene)chromium(i) and [1,2,5]thiadiazolo[3,4-c][1,2,5]thiadiazolidyl.

The reaction between bis(benzene)chromium(0), Cr0(C6H6)2, and [1,2,5]thiadiazolo[3,4-c][1,2,5]thiadiazole (abbreviated as TDTD) formed single crystals of the 1 : 1 salt, [CrI(C6H6)2]+[TDTD]-. The crystal structure of [Cr(C6H6)2][TDTD] belongs to the monoclinic P21/c space group, and involves a CdSO4-type network (or quartz dual net), which is formed by CHN hydrogen bonds between [Cr(C6H6)2]+ (S = 1/2) and [TDTD]- (S = 1/2). In addition to this network, the two components form an alternating chain crystal with a π-π overlap along the [110] and [11[combining macron]0] directions. The theoretical calculations for the pairwise intermolecular magnetic exchange interactions in [Cr(C6H6)2][TDTD] reveal the presence of 3D interactions, ranging from an antiferromagnetic interaction of -8.96 cm-1 to a ferromagnetic one of 1.70 cm-1. The temperature dependence of the paramagnetic susceptibility χp indicates the dominance of an antiferromagnetic interaction with a negative Weiss constant of -4.8 K and a magnetic ordering at 8 K, which can be characterized in terms of weak ferromagnetism.

Donor-Acceptor Complexes between 1,2,5-Chalcogenadiazoles (Te, Se, S) and the Pseudohalides CN- and XCN- (X=O, S, Se, Te).

Donor-acceptor (D-A) complexes between 3,4-dicyano-1,2,5-chalcogenadiazoles [chalcogen=Te (1 a), Se (1 b), S (1 c)] and the pseudohalides CN- and XCN- (X=O, S, Se, Te) were studied experimentally and theoretically. For 1 a, they were isolated as [K(18-crown-6)][1 a-CN] (2), [K(18-crown-6)][1 a-NCO] (3), [K(18-crown-6)][1 a-SCN] (4), [K(18-crown-6)][1 a-SeCN] (5), and [K][1 a-NCSe] (6) and characterized by X-ray diffraction (XRD), UV/Vis and NMR spectroscopy, and DFT and QTAIM calculations. For 1 b and 1 c, the complexes were not isolated due to unfavorable thermodynamics. In all isolated complexes, the D-A bonds, stabilized by negative hyperconjugation, were longer than the sum of the covalent radii and shorter than the sum of the van der Waals radii of the bonded atoms. In mixtures of 1 a, F- , and SeCN- , the complex [1 a-F]- was selectively formed in accordance with thermodynamics. The reaction of 1 a with SeCN- and the cyclic trimeric perfluoro-ortho-phenylene mercury afforded the complex [K(18-crown-6)][SCN]⋅(o-C6 F4 Hg)3 , which was characterized by XRD.

Fused 1,2,3-Thiaselenazoles Synthesized from 1,2,3-Dithiazoles through Selective Chalcogen Exchange.

A new approach to the synthesis of fused 1,2,3-thiaselenazoles-rare five-membered heterocycles that contain two different chalcogens-from the corresponding 1,2,3-dithiazoles and SeO2 was accomplished by selective exchange of S and Se atoms. The fused carbo- and heterocyclic units were indene, naphthalenone, cyclohexadienone, cyclopentadiene, benzoannulene, and benzoxazine. The molecular structures of two of the thiaselenadiazole products and one of the dithiazole precursors were confirmed by single-crystal X-ray diffraction. The reaction is highly solvent selective; it only takes place in solvents that contain a C=O group (e.g., DMF or tetramethylurea). According to DFT calculations, the reaction is thermodynamically favorable. Based on the DFT calculations and 77 Se NMR spectroscopy, two tentative mechanisms that feature isomeric transition states and intermediates are suggested for the reaction via ring-opening addition of SeO2 to the S-X dithiazole bond (X=N or S). The DFT-calculated first adiabatic electron affinities of the compounds were chalcogen independent and positive in all cases, which assumes formation of thermodynamically stable radical anions (RAs). These calculated RAs featured either normal or abnormal elongation of the S1-X2 (X=S or Se) bond relative to their neutral precursors and possessed π* or σ* SOMOs, respectively.

Synthesis and Properties of the Heterospin (S1 = S2 = (1)/2) Radical-Ion Salt Bis(mesitylene)molybdenum(I) [1,2,5]Thiadiazolo[3,4-c][1,2,5]thiadiazolidyl.

Low-temperature interaction of [1,2,5]thiadiazolo[3,4-c][1,2,5]thiadiazole (1) with MoMes2 (Mes = mesitylene/1,3,5-trimethylbenzene) in tetrahydrofuran gave the heterospin (S1 = S2 = (1)/2) radical-ion salt [MoMes2](+)[1](-) (2) whose structure was confirmed by single-crystal X-ray diffraction (XRD). The structure revealed alternating layers of the cations and anions with the Mes ligands perpendicular, and the anions tilted by 45°, to the layer plane. At 300 K the effective magnetic moment of 2 is equal to 2.40 µB (theoretically expected 2.45 µB) and monotonically decreases with lowering of the temperature. In the temperature range 2-300 K, the molar magnetic susceptibility of 2 is well-described by the Curie-Weiss law with parameters C and θ equal to 0.78 cm(3) K mol(-1) and -31.2 K, respectively. Overall, the magnetic behavior of 2 is similar to that of [CrTol2](+)[1](-) and [CrCp*2](+)[1](-), i.e., changing the cation [MAr2](+) 3d atom M = Cr (Z = 24) with weak spin-orbit coupling (SOC) to a 4d atom M = Mo (Z = 42) with stronger SOC does not affect macroscopic magnetic properties of the salts. For the XRD structure of salt 2, parameters of the Heisenberg spin-Hamiltonian were calculated using the broken-symmetry DFT and CASSCF approaches, and the complex 3D magnetic structure with both the ferromagnetic (FM) and antiferromagnetic (AF) exchange interactions was revealed with the latter as dominating. Salt 2 is thermally unstable and slowly loses the Mes ligands upon storage at ambient temperature. Under the same reaction conditions, interaction of 1 with MoTol2 (Tol = toluene) proceeded with partial loss of the Tol ligands to afford diamagnetic product.

Bis(toluene)chromium(I) [1,2,5]thiadiazolo[3,4-c][1,2,5]thiadiazolidyl and [1,2,5]thiadiazolo[3,4-b]pyrazinidyl: new heterospin (S1 = S2 = ½) radical-ion salts.

Bis(toluene)chromium(0), Cr(0)(η(6)-C7H8)2 (3), readily reduced [1,2,5]thiadiazolo[3,4-c][1,2,5]thiadiazole (1) and [1,2,5]thiadiazolo[3,4-b]pyrazine (2) in a tetrahydrofuran solvent with the formation of heterospin, S1 = S2 = ½, radical-ion salts [3](+)[1](-) (4) and [3](+)[2](-) (5) isolated in high yields. The salts 4 and 5 were characterized by single-crystal X-ray diffraction (XRD), solution and solid-state electron paramagnetic resonance, and magnetic susceptibility measurements in the temperature range 2-300 K. Despite the formal similarity of the salts, their crystal structures were very different and, in contrast to 4, in 5 anions were disordered. For the XRD structures of the salts, parameters of the Heisenberg spin Hamiltonian were calculated using the CASSCF/NEVPT2 and broken-symmetry density functional theory approaches, and the complex magnetic motifs featuring the dominance of antiferromagnetic (AF) interactions were revealed. The experimental χT temperature dependences of the salts were simulated using the Van Vleck formula and a diagonalization of the matrix of the Heisenberg spin Hamiltonian for the clusters of 12 paramagnetic species with periodic boundary conditions. According to the calculations and χT temperature dependence simulation, a simplified magnetic model can be suggested for the salt 4 with AF interactions between the anions ([1](-)···[1](-), J1 = -5.77 cm(-1)) and anions and cations ([1](-)···[3](+), J2 = -0.84 cm(-1)). The magnetic structure of the salt 5 is much more complex and can be characterized by AF interactions between the anions, [2](-)···[2](-), and by both AF and ferromagnetic (FM) interactions between the anions and cations, [2](-)···[3](+). The contribution from FM interactions to the magnetic properties of the salt 5 is in qualitative agreement with the positive value of the Weiss constant Θ (0.4 K), whereas for salt 4, the constant is negative (-7.1 K).

Interaction of 1,2,5-chalcogenadiazole derivatives with thiophenolate: hypercoordination with formation of interchalcogen bond versus reduction to radical anion.

According to the DFT calculations, [1,2,5]thiadiazolo[3,4-c][1,2,5]thiadiazole (4), [1,2,5]selenadiazolo[3,4-c][1,2,5]thiadiazole (5), 3,4-dicyano-1,2,5-thiadiazole (6), and 3,4-dicyano-1,2,5-selenadiazole (7) have nearly the same positive electron affinity (EA). Under the CV conditions they readily produce long-lived π-delocalized radical anions (π-RAs) characterized by EPR. Whereas 4 and 5 were chemically reduced into the π-RAs with thiophenolate (PhS(-)), 6 did not react and 7 formed a product of hypercoordination at the Se center (9) isolated in the form of the thermally stable salt [K(18-crown-6)][9] (10). The latter type of reactivity has never been observed previously for any 1,2,5-chalcogenadiazole derivatives. The X-ray structure of salt 10 revealed that the Se-S distance in the anion 9 (2.722 Å) is ca. 0.5 Å longer than the sum of the covalent radii of these atoms but ca. 1 Å shorter than the sum of their van der Waals radii. According to the QTAIM and NBO analysis, the Se-S bond in 9 can be considered a donor-acceptor bond whose formation leads to transfer of ca. 40% of negative charge from PhS(-) onto the heterocycle. For various PhS(-)/1,2,5-chalcogenadiazole reaction systems, thermodynamics and kinetics were theoretically studied to rationalize the interchalcogen hypercoordination vs reduction to π-RA dichotomy. It is predicted that interaction between PhS(-) and 3,4-dicyano-1,2,5-telluradiazole (12), whose EA slightly exceeds that of 6 and 7, will lead to hypercoordinate anion (17) with the interchalcogen Te-S bond being stronger than the Se-S bond observed in anion 9.

Congestive Heart Failure home monitoring pilot study in urban Denver.

With a growing number of low-income patients developing Congestive Heart Failure in urban Denver, accessible and affordable solutions are needed to provide home management options. A multidisciplinary team evaluated currently available options for telemonitoring and developed a solution for an initial pilot study. This system is currently used in the Denver Metro area (Colorado) for 44 CHF patients. Preliminary results show this approach is effective and has reduced the patients' average length of stay at the hospital compared to historical data and control patients who do not use a remote monitoring system.

Heterospin pi-heterocyclic radical-anion salt: synthesis, structure, and magnetic properties of decamethylchromocenium [1,2,5]thiadiazolo[3,4-c][1,2,5]thiadiazolidyl.

Decamethylchromocene, Cr(II)(eta(5)-C(5)(CH(3))(5))(2) (2), readily reduced [1,2,5]thiadiazolo[3,4-c][1,2,5]thiadiazole (1) in a tetrahydrofuran solvent at ambient temperature with the formation of radical-anion salt [2](+)[1](-) (3) isolated in 97% yield. The heterospin salt 3 ([2](+), S = 3/2; [1](-), S = 1/2) was characterized by single-crystal X-ray diffraction as well as magnetic susceptibility measurements in the temperature range 2-300 K. The experimental data together with theoretical analysis of the salt's magnetic structure within the CASSCF and spin-unrestricted broken-symmetry (BS) density functional theory (DFT) approaches revealed antiferromagnetic (AF) interactions in the crystalline 3: significant between anions [1](-), weak between cations [2](+), and very weak between [1](-) and [2](+). Experimental temperature dependences of the magnetic susceptibility and the effective magnetic moment of 3 were very well reproduced in the assumption of the AF-coupled [1](-)...[1](-) (J(1) = -40 +/- 9 cm(-1)) and [2](+)...[2](+) (J(2) = -0.58 +/- 0.03 cm(-1)) pairs. The experimental J(1) value is in reasonable agreement with the value calculated using BS UB3LYP/6-31+G(d) (-61 cm(-1)) and CASSCF(10,10)/6-31+G(d) (-15.3 cm(-1)) approaches. The experimental J(2) value is also in agreement with that calculated using the BS DFT approach (-0.33 cm(-1)).