The Influence of Pichia kluyveri Addition on the Aroma Profile of a Kombucha Tea Fermentation.

Traditional kombucha is a functional tea-based drink that has gained attention as a low or non-alcoholic beverage. The fermentation is conducted by a community of different microorganisms, collectively called SCOBY (Symbiotic Culture of Bacteria and Yeast) and typically consists of different acetic acid bacteria and fermenting yeast, and in some cases lactic acid bacteria that would convert the sugars into organic acids-mostly acetic acid. In this study, the effect of including a Pichia kluyveri starter culture in a kombucha fermentation was investigated. P. kluyveri additions led to a quicker accumulation of acetic acid along with the production of several acetate esters including isoamyl acetate and 2-phenethyl acetate. A subsequent tasting also noted a significant increase in the fruitiness of the kombucha. The significant contribution to the aroma content shows the promise of this yeast in future microbial formulations for kombucha fermentations.

Zinc availability from zinc-enriched yeast studied with an in vitro digestion/Caco-2 cell culture model.

BACKGROUND: Organic zinc sources for the treatment of zinc deficiency or as a supplement to a specific diet are increasingly needed. Zinc-enriched yeast (ZnYeast) biomass is a promising nutritional supplement for this essential micronutrient. However, these products are not yet authorized in the European Union and a clear position from the European Food Safety Authority on the use of ZnYeast as a zinc supplement is pending, demanding more data on its bioavailability. OBJECTIVE: The study aimed to produce a ZnYeast based on a Saccharomyces genus (S. pastorianus Rh), characterize its zinc enrichment quota, cellular distribution of zinc, and evaluate its zinc bioavailability after human digestion by comparing it to commonly used inorganic and organic zinc supplements (ZnO, ZnSO4, zinc gluconate, and zinc aspartate). METHOD AND MAIN FINDINGS: The zinc-enriched S. pastorianus Rh contained 5.9 ± 1.0 mg zinc/g yeast, which was predominantly localized on the cell surface according to its characterization on the microscale with scanning electron microscopy (SEM) with energy-dispersive X-ray (EDX). Combined experiments with a human in vitro digestion model and the in vitro intestinal cell model Caco-2 showed that intestinal zinc bioavailability of digested yeast biomass was comparable to the other zinc supplements, apart from ZnO, which was somewhat less bioavailable. Moreover, zinc released from digested ZnYeast was available for biological processes within the enterocytes, leading to mRNA upregulation of metallothionein, a biomarker of intestinal zinc status, and significantly elevated the cellular labile zinc pool. CONCLUSIONS: Our findings demonstrated that ZnYeast represents a suitable nutritional source for organically bound zinc and highlighted optimization strategies for future production of dietary ZnYeast.

Tradition as a Stepping Stone for a Microbial Defined Water Kefir Fermentation Process: Insights in Cell Growth, Bioflavoring, and Sensory Perception.

A process development from a traditional grain-based fermentation to a defined water kefir fermentation using a co-culture of one lactic acid bacterium and one yeast was elaborated as a prerequisite for an industrially scalable, controllable, and reproducible process. Further, to meet a healthy lifestyle, a low ethanol-containing product was aimed for. Five microbial strains-Hanseniaspora valbyensis, Dekkera bruxellensis, Saccharomyces cerevisiae, Liquorilactobacillus nagelii, and Leuconostoc mesenteroides-were used in pairs in order to examine their influence on the fermentation progress and the properties of the resulting water kefir products against grains as a control. Thereby, the combination of H. valbyensis and L. mesenteroides provided the best-rated water kefir beverage in terms of taste and low ethanol concentrations at the same time. As a further contribution to harmonization and reduction of complexity, the usage of dried figs in the medium was replaced by fig syrup, which could have been proven as an adequate substitute. However, nutritional limitations were faced afterward, and thus, an appropriate supplementation strategy for yeast extract was established. Finally, comparative trials in 5-L scale applying grains as well as a defined microbial consortium showed both water kefir beverages characterized by a pH of 3.14, and lactic acid and aromatic sensory properties. The product resulting from co-culturing outperformed the grain-based one, as the ethanol level was considerably lower in favor of an increased amount of lactic acid. The possibility of achieving a water kefir product by using only two species shows high potential for further detailed research of microbial interactions and thus functionality of water kefir.

Microbial production of glutathione.

Glutathione (GSH) is a non-coding tripeptide thiol with several important regulative and protective functions in eukaryotes and in most prokaryotes. The primary function of GSH is to maintain the redox potential of the cell, which is directly connected to GSH concentration, and to prevent cellular damages caused by reactive oxygen species or toxic heavy metals. Due to its antioxidant character, it is widely used in pharmaceutical, cosmetic and food industry. There have been different strategies to optimize GSH yield and productivity in bacteria and yeasts by means of metabolic and evolutionary engineering, media optimization and bioprocess engineering. The fed-batch procedure with yeasts of the genera Saccharomyces and Candida is still common method for industrial production. However, for an economic bioprocess production of GSH key factors like media costs, strain performance and process scalability are essential. Beside the extraction and purification of GSH as bulk product, GSH-enriched yeast cells are used for food and beverage applications, as well. This review outlines current applications of microbially produced GSH and illustrates current developments and strategies for its production.

Systematic development of a two-stage fed-batch process for lipid accumulation in Rhodotorula glutinis.

The application of oleaginous yeast cells as feed supplement, for instance in aqua culture, can be a meaningful alternative for fish meal and oil additives. Therefore, a two-stage fed-batch process split into growth and lipogenesis phase was systematically developed to enrich the oleaginous yeast Rhodotorula glutinis Rh-00301 with high amounts of lipids at industrial relevant biomasses. Thereby, the different carbon sources glucose, sucrose and glycerol were investigated concerning their abilities to serve as a suited raw material for growth and/or lipid accumulation. With the background of economic efficiency C/N ratios of 40, 50 and 70 were investigated as well. It became apparent that glycerol is an improper carbon source most likely because of the passive diffusion of this compound caused by absence of active transporters. The opposite was observed for sucrose, which is the main carbon source in molasses. Finally, an industrially applicable process was successfully established that ensures biomasses of 106±2gL-1 combined with an attractive lipid content of 63±6% and a high lipid-substrate yield (YL/S) of 0.18±0.02gg-1 in a short period of time (84h). Furthermore, during these studies a non-negligible formation of the by-product glycerol was detected. This characteristic of R. glutinis is discussed related to other oleaginous yeasts, where glycerol formation is absent. Nevertheless, due to modifications in the feeding procedure, the formation of glycerol could have been reduced but not avoided.

Medium optimization based on yeast's elemental composition for glutathione production in Saccharomyces cerevisiae.

The production of glutathione (GSH) or GSH enriched yeast is still in the focus of research driven by a high industrial interest. In this study, an optimal growth rate for GSH production via Saccharomyces cerevisiae Sa-07346 was investigated. To further improve the fermentation process in a way that it is independent of lots, the influence of different WMIX medium compositions on biomass and GSH production was studied. Thereby, the fermentation medium was adjusted based on yeast's elemental composition. The resulting chemically defined fermentation medium led to high cell densities in fed-batches. Therefore, it has the potential to be applied successfully for other high cell density yeast fermentation processes. As cysteine is the key component for GSH production, different cysteine addition strategies were studied and finally, a continuous cysteine feeding was applied in the late stage of fermentation. Thereby, a GSH concentration of 1459 ± 57 mg/l was reached by continuously feeding cysteine, which meant an increase to 253% compared to the control without cysteine addition (577 mg/l GSH).

Evaluation of cysteine ethyl ester as efficient inducer for glutathione overproduction in Saccharomyces spp.

Economical yeast based glutathione (GSH) production is a process that is influenced by several factors like raw material and production costs, biomass production and efficient biotransformation of adequate precursors into the final product GSH. Nowadays the usage of cysteine for the microbial conversion into GSH is industrial state of practice. In the following study, the potential of different inducers to increase the GSH content was evaluated by means of design of experiments methodology. Investigations were executed in three natural Saccharomyces strains, S. cerevisiae, S. bayanus and S. boulardii, in a well suited 50ml shake tube system. Results of shake tube experiments were confirmed in traditional baffled shake flasks and finally via batch cultivation in lab-scale bioreactors under controlled conditions. Comprehensive studies showed that the usage of cysteine ethyl ester (CEE) for the batch-wise biotransformation into GSH led up to a more than 2.2 times higher yield compared to cysteine as inducer. Additionally, the intracellular GSH content could be significantly increased for all strains in terms of 2.29±0.29% for cysteine to 3.65±0.23% for CEE, respectively, in bioreactors. Thus, the usage of CEE provides a highly attractive inducing strategy for the GSH overproduction.

Enhanced incorporation yield of cysteine for glutathione overproduction by fed-batch fermentation of Saccharomyces cerevisiae.

In the following work a high cell density fed-batch process with Saccharomyces cerevisiae coupled with a high efficient incorporation of cysteine for glutathione (GSH) overproduction was developed. Therefore, a feeding strategy based on the respiratory quotient (RQ) was applied to ensure high biomass (96.1g/l). Furthermore, the optimal cysteine concentration and time of cysteine addition were investigated. Low concentrations of cysteine at late fermentation phases resulted in relatively high incorporation yields of about 0.40mol/mol and maintained the physiology of cultivated yeast. By changing the cysteine feeding from standard single shot to continuous addition, an often observed cell specific toxicity, triggered by high cysteine concentrations, could be prevented and the cysteine incorporation yield (0.54±0.01mol/mol) and GSH content (1650.7±42.8mg/l; 1.76±0.08%) were maximized, respectively. The developed process was transferred from laboratory into pilot plant scale. Further, the reduced cell specific toxicity enabled the development of a repeated fed-batch procedure with a suitable performance concerning cysteine incorporation yield (0.40±0.1mol/mol), biomass (84.2±1.2g/l) and GSH content (1304.7±61.4mg/l).

Control of cell morphology of probiotic Lactobacillus acidophilus for enhanced cell stability during industrial processing.

The viability of bacteria during industrial processing is an essential quality criterion for bacterial preparations, such as probiotics and starter cultures. Therefore, producing stable microbial cultures during proliferation is of great interest. A strong correlation between the culture medium and cellular morphology was observed for the lactic acid bacterium Lactobacillus acidophilus NCFM, which is commonly used in the dairy industry as a probiotic supplement and as a starter culture. The cell shapes ranged from single short rods to long filamentous rods. The culture medium composition could control this phenomenon of pleomorphism, especially the use of peptone in combination with an adequate heating of the medium during preparation. Furthermore, we observed a correlation between the cell size and stability of the microorganisms during industrial processing steps, such as freeze-drying, extrusion encapsulation and storage following dried preparations. The results revealed that short cells are more stable than long cells during each of the industrially relevant processing steps. As demonstrated for L. acidophilus NCFM, the adaptation of the medium composition and optimized medium preparation offer the possibility to increase the concentration of viable cells during up- and survival rate during down-stream processing.