Toxicity of humidifier disinfectant polyhexamethylene guanidine hydrochloride by two-week whole body-inhalation exposure in rats.

The use of polyhexamethylene guanidine hydrochloride (PHMG·HCl) as a humidifier disinfectant caused an outbreak of pulmonary disease, leading to the deaths of pregnant women and children in South Korea. However, limited information is available on the inhalation toxicity of PHMG·HCl. Therefore, this study aimed to characterize the subacute inhalation toxicity of PHMG·HCl by whole-body exposure in rats. F344 rats were exposed to 0 mg/m3, 1 mg/m3, 5 mg/m3, or 25 mg/m3 of PHMG·HCl for 6 h/day, 5 days/week for two weeks via whole-body inhalation. Emaciation and rale were observed in rats in the 25 mg/m3 PHMG·HCl group. Significant changes in body weight, hematology, serum chemistry and organ weight were observed in all PHMG·HCl-exposed groups. Gross lesions showed ballooning or red focus in the lungs of rats in the PHMG·HCl-exposed groups. In histopathological examination, most of histological lesions (including degeneration, atrophy, ulcer, inflammatory cell infiltration, inflammation, and fibrosis in nasal cavity, larynx, trachea, and lungs) indicated tissue damage by PHMG·HCl in all PHMG·HCl-exposed groups. Additionally, atrophy of the spleen, thymus, and reproductive organs; immaturity of the testes; and cell debris in the epididymides were affected by the reduction in body weight in PHMG·HCl-exposed groups. In conclusion, two-week repeated whole-body inhalation exposure of rats to PHMG·HCl reveled toxic effects on the respiratory system and secondary effects on other organs. The results of this study indicate that the no observable adverse effect level (NOAEL) for PHMG·HCl is below 1 mg/m3.

Assessment of respiratory and systemic toxicity of Benzalkonium chloride following a 14-day inhalation study in rats.

BACKGROUND: Although biocides at low concentrations have been used to control pests, they can be more harmful than industrial chemicals as humans are directly and frequently exposed to such biocides. Benzalkonium chloride (BAC or BKC) is a non-toxic substance used to control pests. Recently, BAC has been increasingly used as a component in humidifier disinfectants in Korea, raising a serious health concern. Moreover, it poses significant health hazards to workers handling the chemical because of direct exposure. In the present study, we aimed to evaluate the respiratory toxicity of BAC due to its inhalation at exposure concentrations of 0.8 (T1 group), 4 (T2 group) and 20 (T3 group) mg/m3. RESULTS: In our previous study on the acute inhalational toxicity of BAC, bleeding from the nasal cavity was observed in all the rats after exposure to 50 mg/m3 BAC. Therefore, in this study, 20 mg/m3 was set as the highest exposure concentration, followed by 4 and 0.8 mg/m3 as the medium and low concentrations for 6 h/day and 14 days, respectively. After exposure, recovery periods of 2 and 4 weeks were provided. Additionally, alveolar lavage fluid was analyzed in males of the BAC-exposed groups at the end of exposure and 2 weeks after exposure to evaluate oxidative damage. In the T3 group exposed to BAC, deep breathing, hoarseness, and nasal discharge were observed along with a decline in feed intake and body weight, and nasal discharge was also observed in the T1 and T2 groups. ROS/RNS, IL-1ß, IL-6, and MIP-2 levels decreased in a concentration-dependent manner in the bronchoalveolar lavage fluid. Histopathological examination showed cellular changes in the nasal cavity and the lungs of the TI, T2, and T3 groups. CONCLUSIONS: As a result, it was confirmed that the target organs in the respiratory system were the nasal cavity and the lungs. The adverse effects were evaluated as reversible responses to oxidative damage. Furthermore, the no observed adverse effect level was found to be less than 0.8 mg/m3 and the lowest benchmark dose was 0.0031 mg/m3. Accordingly, the derived no-effect level of BAC was calculated as 0.000062 mg/m3.

Anti-Photoaging Effect of Plant Extract Fermented with Lactobacillus buchneri on CCD-986sk Fibroblasts and HaCaT Keratinocytes.

Ultraviolet (UV) exposure triggers the abnormal production of reactive oxygen (ROS) species and the expression of matrix metalloproteinases (MMPs) that are responsible for photoaging. Probiotics are widely used in healthcare and for immune enhancement. One probiotic, Lactobacillus buchneri is found in Kimchi. This study was aimed at assessing the anti-photoaging effect of plant extracts fermented with L. buchneri (PELB) to develop functional cosmetics. We investigated the anti-photoaging effect of PELB in a UVB-induced photoaging in vitro model and selected effective extracts using the elastase inhibition assay, ELISA for Type I procollagen and collagenase-1, and quantitative real time PCR. Normal human dermal fibroblasts and epidermal keratinocytes were pre-treated with PELB and exposed to UVB. We found that PELB decreased elastase activity and increased type I collagen expression in a UVB-induced photoaging in vitro model. In addition, PELB greatly reduced collagenase activity and MMP mRNA levels in a UVB-induced photoaging in vitro model. Furthermore, PELB promoted the expression of moisture factor and anti-oxidant enzymes in a UVB-induced photoaging in vitro model. These results indicated that the PELB could be potential candidates for the protective effects against UVB-induced photoaging. Overall, these results suggest that PELB might be useful natural components of cosmetic products.

Immunohistochemical characterization of oxidative stress in the lungs of rats exposed to the humidifier disinfectant polyhexamethylene guanidine hydrochloride.

Polyhexamethylene guanidine hydrochloride (PHMG-HCl), an antimicrobial additive in humidifier disinfectants, was associated with the pulmonary disease outbreak in South Korea. However, PHMG-mediated oxidative stress has only been studied in vitro. Here, we evaluated PHMG-induced oxidative stress in the lungs of rats exposed to PHMG-HCl. Male F344 rats were exposed to different concentrations of PHMG-HCl for 13-weeks via whole-body inhalation. Histopathological examination of the exposed rats showed the presence of lung lesions, including alveolar/interstitial fibrosis with inflammatory cell infiltration, bronchioalveolar hyperplasia, bronchiolar/alveolar squamous metaplasia, bronchial/bronchiolar epithelial detachment, and alveolar hemorrhage. Immunohistochemical analysis showed that 4-hydroxynonenal (4-HNE) was expressed in the bronchiolar epithelium, mainly in Clara cells and macrophages of the fibrotic tissue. The number of 4-HNE-positive cells increased significantly in a dose-dependent manner. This is the first in vivo study to report PHMG-induced oxidative stress. Our study provides clues to elucidate the mechanisms underlying PHMG-induced damage in patients affected by humidifier disinfectants.

Twenty-Eight-Day Repeated Inhalation Toxicity Study of Aluminum Oxide Nanoparticles in Male Sprague-Dawley Rats.

Aluminum oxide nanoparticles (Al2O3 NPs) are among the most widely used nanomaterials; however, relatively little information about their risk identification and assessment is available. In the present study, we aimed to investigate the potential toxicity of Al2O3 NPs following repeated inhalation exposure in male Sprague-Dawley rats. Rats were exposed to Al2O3 NPs for 28 days (5 days/week) at doses of 0, 0.2, 1, and 5 mg/m3 using a nose-only inhalation system. During the experimental period, we evaluated the clinical signs, body weight change, hematological and serum biochemical parameters, necropsy findings, organ weight, and histopathology findings. Additionally, we analyzed the bronchoalveolar lavage fluid (BALF), including differential leukocyte counts, and aluminum contents in the major organs and blood. Aluminum contents were the highest in lung tissues and showed a dose-dependent relationship in the exposure group. Histopathology showed alveolar macrophage accumulation in the lungs of rats in the 5 mg/m3 group during exposure and recovery. These changes tended to increase at the end of the recovery period. In the BALF analysis, total cell and neutrophil counts and lactate dehydrogenase, tumor necrosis factor-α, and interleukin-6 levels significantly increased in the 1 and 5 mg/m3 groups during exposure. Under the present experimental conditions, we suggested that the no-observed-adverse-effect level of Al2O3 NPs in male rats was 1 mg/m3, and the target organ was the lung.

Assessment of cyclohexanone toxicity in inhalation-exposed F344 rats and B6C3F1 mice: applications in occupational health.

BACKGROUND: Cyclohexanone is a chemical used in various industries and many workers are exposed to it. Therefore, in this study, we determined the toxicity of cyclohexanone in inhalation-exposed F344 rats and B6C3F1 mice, so as to apply the findings in hazard and risk assessments. METHODS: Ten male and 10 female rats and mice per test group were exposed to cyclohexanone vapors at 0, 100, 250, and 625 ppm concentrations for 6 h per day, 5 d per week, and for 13 weeks. All rats and mice were killed after the exposure period. Clinical signs, body weight, feed intake, and ophthalmoscopy findings were recorded during the exposure period, and hematology, blood biochemistry, organ weights, gross findings, and histopathology were evaluated thereafter. RESULTS: The following findings were noted in cyclohexanone-exposed F344 rats: increased alanine aminotransferase (ALT) and aspartate aminotransferase (AST) levels, increased liver weight, and bile duct hyperplasia in the males exposed to 250 and 625 ppm cyclohexanone, increased ALT levels and bile duct hyperplasia in the females exposed to 625 ppm cyclohexanone, and increased blood urea nitrogen (BUN) and tubular basophilia in the renal cortex in the males exposed to 625 ppm cyclohexanone. On the other hand, B6C3F1 mice exposed to cyclohexanone showed no obvious exposure-related effects. CONCLUSION: Based on the findings, the no-observed-adverse-effect level (NOAEL) was determined to be 100 ppm in F344 rats and >625 ppm in B6C3F1 mice. Therefore, 2 ppm was revealed as the derived no-effect level (DNEL) for cyclohexanone.

Influence of Starting Powders on Hydroxyapatite Coatings Fabricated by Room Temperature Spraying Method.

Three types of raw materials were used for the fabrication of hydroxyapatite coatings by using the room temperature spraying method and their influence on the microstructure and in vitro characteristics were investigated. Starting hydroxyapatite powders for coatings on titanium substrate were prepared by a heat treatment at 1100 °C for 2 h of bovine bone, bone ash, and commercial hydroxyapatite powders. The phase compositions and Ca/P ratios of the three hydroxyapatite coatings were similar to those of the raw materials without decomposition or formation of a new phase. All hydroxyapatite coatings showed a honeycomb structure, but their surface microstructures revealed different features in regards to surface morphology and roughness, based on the staring materials. All coatings consisted of nano-sized grains and had dense microstructure. Inferred from in vitro experiments in pure water, all coatings have a good dissolution-resistance and biostability in water.

Fabrication and Microstructure of Hydroxyapatite Coatings on Zirconia by Room Temperature Spray Process.

Hydroxyapatite coatings were fabricated on zirconia substrates by a room temperature spray process and were investigated with regards to their microstructure, composition and dissolution in water. An initial hydroxyapatite powder was prepared by heat treatment of bovine-bone derived powder at 1100 °C for 2 h, while dense zirconia substrates were fabricated by pressing 3Y-TZP powder and sintering it at 1350 °C for 2 h. Room temperature spray coating was performed using a slit nozzle in a low pressure-chamber with a controlled coating time. The phase composition of the resultant hydroxyapatite coatings was similar to that of the starting powder, however, the grain size of the hydroxyapatite particles was reduced to about 100 nm due to their formation by particle impaction and fracture. All areas of the coating had a similar morphology, consisting of reticulated structure with a high surface roughness. The hydroxyapatite coating layer exhibited biostability in a stimulated body fluid, with no severe dissolution being observed during in vitro experimentation.

Surface Corrosion of Nanoscaled Hydroxyapatite During an In Vivo Experiment.

Hydroxyapatite (HA) is widely used as a bioactive ceramics as it forms a chemical bond with bone. However, the drawback to using this material is its inferior mechanical properties. In this research, surface corrosion and disintegration of nanoscaled HA in a dog were studied, and the mechanism by which phase-pure HA dissolved in vivo was investigated. Biological properties of HA in vivo are affected by the grain-boundary dissolution followed by a surface corrosion and microstructural disintegration. This kind of dissolution process, apparently evidenced at the grain boundary, causes particle generation, which indicates that both long-term bone in-growth and mechanical properties can dramatically deteriorate. Implant dissolution by osteoclasts in vivo is also observed on the surface of hydroxyapatite. Implant surface showed an aggressive corrosion by an osteoclast resorption. Severe and deeper dissolution underwent close to osteoclast resulting in formation of smaller and more round particle shape.

Acute Oral or Dermal and Repeated Dose 90-Day Oral Toxicity of Tetrasodium Pyrophosphate in Spraque Dawley (SD) Rats.

OBJECTIVES: Tetrasodium pyrophosphate (TSP) is used in processed meat products, as an emulsifier in cheese, and as a color preservative in soybean paste. However, little is known about its toxicity. This study was conducted to investigate the potential acute and repeated dose toxicity of TSP in Spraque Dawley (SD) rats. METHODS: In the acute study, animals were administered with oral or dermal doses of 2,000 mg/kg TSP. In the repeated dose study, animals were administered doses of 0, 250, 500, and 1,000 mg/kg by oral gavage five times a week for 90 days. RESULTS: In acute toxicity studies, no dead animals or abnormal necropsy findings were found in the control or treated group. In the repeated dose toxicity study, there were no significant changes in body weight in the 1,000 mg/kg treatment group, or food consumption, urinalysis, and hematology in any group. With regards serum biochemistry, the levels of total protein, albumin, A/G ratio, triglyceride, calcium and inorganic phosphate were altered at doses of 500 and 1,000 mg/kg. However, no changes were observed at the dose of 250 mg/kg. With regards histopathological findings, cortical tubular basophilia of the kidney increased at the dose of 1,000 mg/kg, but not at doses of 250 and 500 mg/kg. No significant changes were observed in other organs at doses of 250, 500, and 1,000 mg/kg. CONCLUSIONS: Based on the results, TSP is unclassified according to the Globally Harmonization System, with an LD(50) value of over 2,000 mg/kg. The no observed effect level (NOEL) and no observed adverse effect level (NOAEL) were 250 and 500 mg/kg /day respectively and the target organ appears to be the kidney.

AFM analysis of anisotropic dissolution in dense hydroxyapatite.

Dense, polycrystalline hydroxyapatite (HA) ceramics prepared by microwave sintering process were immersed for 1-60s in an acidic solution of pH 3, similar to the circumstance of osteoclastic resorption. Dissolution behavior on the surface of HA immersed in the solution was investigated. The surface topography was evaluated by using atomic force microscopy (AFM) with tapping mode. The erosion of grain boundaries in the dense HA was observed and the grain boundary dissolution occurred to a great extent forming a wide gap (50-100 nm) between grains. Notably, anisotropic dissolution was observed on the HA surface showing two topographically different regions; grains (Grain 1) with relatively intact surface, and grains (Grain 2) involving formation of subgrain boundaries and aligned crystallites in a certain direction. The difference in RMS surface roughness evidenced the distinct dissolution feature of ceramic grains. The surface roughness of Grain 1 increased from 1.45+/-0.30 to 3.11+/-0.63 nm, whereas the roughness of Grain 2 increased from 2.36+/-0.11 to 5.27+/-1.34 nm.

Nanostructured hydroxyapatite by microwave sintering.

In this work, nanostructured HA ceramics with dense microstructure were prepared by microwave sintering process and their microstructures were compared with the case of conventional sintering. Commercially obtained HA powder with Ca/P molar ratio of 1.67 was used as a starting material. The powder of granular type consists of nanocrystalline particles of 20-30 nm in size. The as-received HA powder or the powder calcined at 800 degrees C, followed by ball-milling was used for the preparation of HA disks. Microwave sintering was conducted at 1200 degrees C for 5 min with a heating rate of 50 degrees C/min. HA ceramics with the sintered densities of approximately 96-97% of the theoretical were obtained. XRD analysis showed that all detectable peaks are identical to pure hydroxyapatite. The HA sintered body made of calcined and ball-milled powder showed uniform microstructure with grain size of 300-400 nm and with finer sub-grains of 30-40 nm.

Effect of lead-free frit on conductivity of nanoparticles-aided silver paste.

Silver thick films were prepared from lead-free silver paste adding silver nanoparticles for low sintering temperature, and the effect of glass frit content on conductivity in the films was investigated. Silver pastes with different glass contents were prepared by mixing micron-scale silver powder of 1.6 microm and nanoparticles of 30-50 nm in size. To prepare lead-free silver paste, 5 wt% of the silver nanoparticles as a sintering aid were added to the micron-scale silver powder. Then, 3 wt%, 6 wt%, and 9 wt% of lead-free frits were added to the mixed powders. Using the paste, thick films were prepared by a screen printing on an alumina substrate and then the films were sintered at temperatures from 300 degrees C to 550 degrees C. As increasing the sintering temperature and content of lead-free frit, the thick films showed dense microstructure. The glass frit enhanced to develop denser microstructure by liquid phase sintering. However, excess of glass content increased sheet resistivity due to the formation of glass pool separated from particle network. Furthermore, the nanoparticles can assist to develop a conductive network in the film. The films with 6 wt% of glass frit had the best conductive network and the lowest sheet resistivity of 3.2 microomega cm.

Preparation of conductive silver paste using bimodal particles.

Networking and density of silver particles is a great importance to obtain low electrical resistivity of silver paste. In order to improve packing density, interconnectivity and conductivity at low sintering temperature, silver paste was prepared from bimodal silver particles, i.e., consisting of micro- and nano-sized particles. In order to fit nano-Ag particle into the interstices of the micro-Ag particles of 1.6 microm in size, the interstices need to be approximate below 360 nm in size. Therefore, we prepared nano-Ag particles of 100-300 nm in size by chemical reduction method. The silver paste prepared by mixing the bimodal powders, Pb-free frit and vehicle were printed on an alumina substrate by screen printing and sintered at temperature of 400-500 degrees C. As increasing the amount of nano-Ag particles and sintering temperature, packing density and electrical conductivity were increased. The nano-Ag particles placed between the micro-Ag particles contributed to improve interconnectivity and densification of the printed films. Accordingly, as the amount of nano-Ag particles was increased, the electrical resistivity were decreased. The thick film at sintered 500 degrees C showed the lowest electrical resistivity of 3.9 microomega cm which can be compatible for application in microelectronics devices.

Dissolution of human teeth-derived hydroxyapatite.

We have been interested in human teeth which consist of hydroxyapatite (HA), but do not degrade for a long time. In order to overcome dissolution and mechanical degradation of man-made HA, biologically derived hydroxyapatite (BHA) ceramics were prepared from human teeth and their dissolving behavior was investigated in distilled water for 3-14 days and compared with an artificial HA made of synthetic HA powder. BHA ceramics were prepared by calcining freshly extracted human teeth at 900 degrees C and followed by sintering at 1200 degrees C for 2 h. All detectable peaks in the artificial HA are identical to HA lattice planes, whereas BHA consisted of a mixture of HA and beta-tricalcium phosphate (TCP). Although the artificial HA was expected to be stable in water, the surface dissolution initiated at grain boundaries followed by generated many separated grains and their associated pores. On the other hand, BHA showed that definite grains considered as beta-TCP were predominantly dissolved and the grains were separated from the matrix leaving pores. In the mean time, the rest region, mainly consisting of HA, did not show any evidence of dissolution. It indicates that BHA showed rather stable grain boundaries and lack of excessive dissolution in liquid environment.

Electrical properties of silver paste prepared from nanoparticles and lead-free frit.

Recently, PbO containing glass systems in commercial silver paste have been used due to their low glass transition temperature, good thermal and electrical properties. However, PbO is a hazardous material to both health and the environment. In this study, Pb-free silver paste was prepared by mixing commercial silver powder and silver nanoparticles. The commercial powder has an average particle size of 1.6 microm. The silver nanoparticles with particles size of 20-50 nm were synthesized by a chemical reduction method using surfactant. Pb-free frit was added into the mixed silver powder as the amounts of 3, 6 and 9 wt%. Using the obtained paste, thick films were fabricated by a screen printing on alumina substrate and the films were fired at temperature from 400 to 550 degrees C. The films had thickness of 6-11 microm and sheet resistivity of about 4-11 microomega cm.

Toxicological study of the hepatotherapeutic herbal formula, chunggan extract, in beagle dogs.

AIM: To evaluate the pharmaceutical safety of a Chinese herbal formula, chunggan extract (CGX), traditionally prescribed as a hepatotherapeutic drug via systemic acute and subacute toxicological study. METHODS: Twenty male dogs and 20 female dogs were fed doses 50 times and 4 times greater than the clinically-recommended drug dosages in an acute and a subacute toxicological study, respectively. Adverse effects were examined by comparing the differences between normal and drug-administered groups using clinical signs, necropsies, histopathologic findings, haematology, urinalysis, and biochemical analysis. RESULTS: In the acute study no change in the body weight, diarrhoea, apetite, mortality rate and histopathology of major organs was observed in male or female dogs with a single administration of CGX at 5 g/kg. No drug-induced abnormalities at analysis of histopathology, haematology, urinalysis, and biochemistry were found with any dose of this drug. CONCLUSION: CGX is supposed to be very safe when used in a clinical application with a wide therapeutic index.