USAGE OF CHLORHEXIDINE AS A FINAL IRRIGANT IN ONE-VISIT ROOT CANAL TREATMENT IN COMPARISON WITH CONVENTIONAL TWO-VISIT ROOT CANAL TREATMENT IN MANDIBULAR MOLARS: A RANDOMIZED CLINICAL TRIAL.

OBJECTIVES: The effectiveness of 1-visit root canal treatment (RCT), especially for teeth with large periapical lesions, are still being debated. Although, the use of chlorhexidine (CHX) as a final irrigant have been recommended to provide an optimized approach in 1-visit RCT, there is limited knowledge about the outcome of 1-visit RCT using CHX as the final irrigant. AIM: The aim of this randomized clinical trial was to evaluate the healing of mandibular molar teeth with large periapical lesions after RCT that was completed in 1 visit using 2% CHX as a final irrigant, comparing the results with a conventional 2-visit RCT as a control group. METHODOLOGY: This study is a prospective, parallel-designed, and single-blinded randomized clinical trial. One-hundred asymptomatic mandibular molar teeth with large periapical lesions were randomly assigned to 2 groups. All teeth were instrumented with Reciproc files with 2.5% sodium hypochloride (NaOCl) and 5% ethylenediaminetetraacetic acid (EDTA) as irrigants. In the intervention group, half of the teeth were treated in 1 visit, receiving an additional final rinse with 2% CHX before obturation; the other half of the teeth, however, were treated in 2 visits with calcium hydroxide (CH) dressings, in the control group. All root canals were obturated with Reciproc gutta-percha cones and AH Plus root canal sealer. All patients were recalled and investigated clinically and radiographically for 48 months. Periapical healing was evaluated statistically using the Mann-Whitney U test, followed by the Friedman and the Wilcoxon tests (α = 0.05). RESULTS: During the 48-month follow-up process, 86 teeth (44 in 1-visit and 42 in 2-visit group) were examined. There were no significant differences between the 2 groups regarding the radiographic healing rates (1-visit group 91% and 2-visit group 88%) (P > .05). CONCLUSION: In this study, 1-visit RCT using 2% CHX as final irrigant in asymptomatic mandibular molars with large periapical lesions produced favorable healing results, similar to 2-visit root canal treatment with calcium hydroxide.

Quality of root canal treatment performed by undergraduate students using nickel-titanium reciprocating versus hand instruments.

PURPOSE: To compare the technical quality of root canal treatment (RCT) depending on the incidence of procedural errors performed by undergraduate students using nickel-titanium reciprocating and conventional hand instrumentation techniques, and to assess the impact of case difficulty and localization of the teeth (maxillary or mandibular molars). METHODS: Dental records and periapical radiographs of molars that were treated with either hand or reciprocating WaveOne (WO) instruments were evaluated retrospectively. The technical quality of RCTs, the incidence of ledge formation, perforation, instrument fracture, overinstrumentation, underfilling, overfilling, inadequate root canal filling, and the effects of case difficulty and tooth localization were compared using the chi-square test with a significance of 5% (α = 0.05). RESULTS: While overinstrumentation was more frequent in the WO group (247 teeth), the incidence of inadequate root canal fillings was higher in the hand instrumentation group (245 teeth) (p < 0.01). No significant difference was observed in the incidence of other procedural errors (p > 0.05). The number of teeth with acceptable technical quality in preparation and obturation was 172 (69.6%) in the WO group, whereas it was 142 (58%) in the hand instrumentation group, presenting a significant difference between the instrumentation techniques (p < 0.01). Higher technical quality rates were observed with WO instrumentation in the high difficulty category and in maxillary teeth (p < 0.01). CONCLUSION: Higher technical quality in preparation and obturation can be achieved with WO reciprocating instruments and file-matched greater tapered gutta-percha cones. No significant difference was observed between the groups in the incidence of procedural errors except for overinstrumentation and insufficient root canal filling. WO instrumentation and obturation with file-matched greater tapered gutta-percha cones provided better technical quality in the high difficulty category and in maxillary teeth.

Energy-Dispersive X-Ray Spectrometry Analysis and Radiopacity of Five Different Root Canal Sealers.

Root canal sealers should have optimum adhesion to the root dentin, low cytotoxicity, sufficient radiopacity and high dimensional stability, which depend mainly on their chemical composition. The aims of this study were to evaluate the chemical composition of Syntex (Cerkamed, Stalowa Wola, Poland), Adseal (Meta Biomed, Cheongju-si, Korea), Sealapex (SybronEndo, Scafati, Italy), MTA Fillapex (Angelus, Londrina, Brazil) and GuttaFlow Bioseal (Coltene/Whaledent, Altstätten, Switzerland) and to determine their radiopacity comparatively. Stainless steel molds with an inner diameter of 5 mm and a depth of 2 mm were constructed. Tested root-canal sealers were mixed and poured into the molds. Following setting, digital periapical radiographs of the specimens (n=12) were taken under standard exposure conditions and the mean gray-values of specimens were measured using a computer graphics program. Then the specimens were examined by scanning electron microscopy, and Energy-dispersive X-ray analysis was performed. The data were analyzed using One-way ANOVA followed by Holm-Sidak multi-comparison test (p = 0.05). Sealapex showed higher calcium peak than MTA Fillapex, GuttaFlow Bioseal, Adseal and Syntex sealers. MTA Fillapex contained a highest amount of tungstate. Sealapex presented the highest radiopacity value among the tested materials (p < 0.05), whereas MTA Fillapex was the least radiopaque material (p < 0.05). Each root canal sealer contains different compositions of radiopacifiers including bismuth oxide, calcium tungstate and zirconium oxide. The tested root canal sealers had radiopacity values above the ISO-specified limit. Sealapex was the most radiopaque root canal sealer followed by GuttaFlow Bioseal, Syntex, Adseal and MTA Fillapex.

A prospective cohort study evaluating the outcome of root canal retreatment in symptomatic mandibular first molars with periapical lesions.

AIM: To evaluate the impact of various predictors on the outcome of root canal retreatment in symptomatic mandibular first molars with periapical lesions after a minimum of 2 years. METHODOLOGY: One hundred and twenty previously root canal treated symptomatic mandibular first molars with periapical lesions which were diagnosed as symptomatic apical periodontitis or acute apical abscess with localized intraoral swelling were included. Root canal retreatment was performed by an experienced endodontist using a standardized treatment protocol. The teeth were followed up clinically and radiographically and the radiographic outcome was assessed using a modified periapical index scale (PAI). The cumulative success proportion and the influence of predictors on the outcome of the root canal retreatment were analysed using Kaplan-Meier analyses and log-rank tests, and the hazard ratios for the predictors were also investigated using Univariate Cox Proportional Hazard regression analysis at a significance level of 5%. RESULTS: Of the 120 teeth, 103 teeth were re-examined with an 85% recall rate. The cumulative success rate was 88% in which 64% were healed and 24% were healing, and failure rate was recorded as 12%. None of the preoperative predictors, including age, gender, soft tissue tenderness, intraoral swelling, size of the lesion, PAI score, apical level and density of root canal filling before root canal retreatment, nor intraoperative predictors, such as active exudate drainage, density of root canal filling after root canal retreatment and restoration type had an influence on the outcome of root canal retreatment (p > .05). The only factor that significantly reduced the success rate of root canal retreatment was the apical level of the root canal filling; when it was more than 2 mm short of the radiographic apex in teeth where apical patency was not established, the success was significantly lower (p = .023). CONCLUSIONS: Root canal retreatment in symptomatic mandibular first molars with periapical lesions resulted in a success rate of 88%. None of the predictors had a significant influence on the outcome, except for the apical level of the root canal filling after root canal retreatment with short root fillings being associated with significantly more post-treatment endodontic disease.

Energy-Dispersive X-Ray Spectrometry Analysis and Radiopacity of Five Different Root Canal Sealers

Abstract Root canal sealers should have optimum adhesion to the root dentin, low cytotoxicity, sufficient radiopacity and high dimensional stability, which depend mainly on their chemical composition. The aims of this study were to evaluate the chemical composition of Syntex (Cerkamed, Stalowa Wola, Poland), Adseal (Meta Biomed, Cheongju-si, Korea), Sealapex (SybronEndo, Scafati, Italy), MTA Fillapex (Angelus, Londrina, Brazil) and GuttaFlow Bioseal (Coltene/Whaledent, Altstätten, Switzerland) and to determine their radiopacity comparatively. Stainless steel molds with an inner diameter of 5 mm and a depth of 2 mm were constructed. Tested root-canal sealers were mixed and poured into the molds. Following setting, digital periapical radiographs of the specimens (n=12) were taken under standard exposure conditions and the mean gray-values of specimens were measured using a computer graphics program. Then the specimens were examined by scanning electron microscopy, and Energy-dispersive X-ray analysis was performed. The data were analyzed using One-way ANOVA followed by Holm-Sidak multi-comparison test (p = 0.05). Sealapex showed higher calcium peak than MTA Fillapex, GuttaFlow Bioseal, Adseal and Syntex sealers. MTA Fillapex contained a highest amount of tungstate. Sealapex presented the highest radiopacity value among the tested materials (p < 0.05), whereas MTA Fillapex was the least radiopaque material (p < 0.05). Each root canal sealer contains different compositions of radiopacifiers including bismuth oxide, calcium tungstate and zirconium oxide. The tested root canal sealers had radiopacity values above the ISO-specified limit. Sealapex was the most radiopaque root canal sealer followed by GuttaFlow Bioseal, Syntex, Adseal and MTA Fillapex.

Resumo Os cimentos endodônticos devem conter ótima adesão à dentina radicular, baixa citotoxicidade, radiopacidade suficiente e estabilidade dimensional elevada, que dependem principalmente da sua composição química. Os objetivos deste estudo foram avaliar a composição química de Syntex (Cerkamed, Stalowa Wola, Polônia), Adseal (Meta Biomed, Cheongju-si, Coreia), Sealapex (SybronEndo, Scafati, Itália), MTA Fillapex (Angelus, Londrina, Brasil) e GuttaFlow Bioseal (Coltene/Whaledent, Altstätten, Suíça) e determinar comparativamente a sua radiopacidade. Foram construídos moldes de aço inoxidável com um diâmetro interior de 5 mm e uma profundidade de 2 mm. Os cimentos testados foram misturados e vertidos em moldes. Após a fixação, foram feitas radiografias periapicais digitais dos espécimes (n=12) em condições de exposição padrão e os valores médios de cinza dos espécimes foram medidos utilizando um programa de computação gráfica. Em seguida, as amostras foram examinadas por microscopia eletrônica de varredura, e foi realizada uma análise de raios X dispersiva de energia. Os dados foram analisados utilizando a ANOVA unidirecional seguida do teste de comparação múltipla Holm-Sidak (p = 0,05). O Sealapex mostrou um pico de cálcio mais elevado do que os cimentos MTA Fillapex, GuttaFlow Bioseal, Adseal e Syntex. O MTA Fillapex continha uma quantidade mais elevada de tungstato. O Sealapex apresentou o maior valor de radiopacidade entre os materiais testados (p < 0,05), enquanto que a MTA Fillapex foi o material menos radiopaco (p < 0,05). Cada cimento endodôntico contém diferentes composições de radiopacificadores incluindo óxido de bismuto, tungstato de cálcio e óxido de zircônio. Os cimentos testados apresentaram valores de radiopacidade acima do limite especificado pela ISO. Sealapex foi o cimento obturador mais radiopaco seguido por GuttaFlow Bioseal, Syntex, Adseal e MTA Fillapex.

The influence of different NiTi instrumentation techniques on postoperative pain after single-visit root canal treatment.

This study aimed to evaluate the effect of multi-file rotary (Protaper Universal) and reciprocating single-file (Reciproc Blue) root canal preparation techniques on the occurrence of postoperative pain in asymptomatic mandibular molar teeth with large periapical lesions in single-visit root canal treatment (RCT). A hundred and twenty teeth were randomly assigned to two groups: Protaper Universal (PTU) or Reciproc Blue (RB) instruments. Postoperative pain at 6, 12, 24, 48, 72 h and 7 days after obturation was measured. Mann-Whitney U-test was performed to compare the pain scores between the groups and to assess the relation of pain with patients' age and gender. Spearman's rank correlation was utilized to correlate the pain intensity and analgesic intake at different time points. There was no significant difference between the instrumentation techniques regarding postoperative pain at any time points evaluated (P > 0.05). There was a correlation between analgesic intake and intensity of pain (P < 0.05). No statistically significant difference was found among the groups assessed in the study in terms of analgesic intake (P > 0.05).

Impact of root canal curvature and instrument type on the amount of extruded debris during retreatment.

OBJECTIVES: The aim of the current study was to assess whether the amount of extruded debris differs for straight and severely curved root canals during retreatment using H-files, R-Endo, Reciproc and ProTaper Universal Retreatment (PTU-R) files. Additionally, the area of residual filling material was evaluated. MATERIALS AND METHODS: Severely curved (n = 104) and straight (n = 104) root canals of maxillary molar teeth were prepared with WaveOne Primary file and obturated with gutta-percha and AH Plus sealer. Root canal filling materials were removed with one of the preparation techniques: group 1: H-file; group 2: R-Endo; group 3: Reciproc; group 4: PTU-R (n = 26). The amount of extruded material and the area of the residual filling material was measured. The data were analyzed with 2-way analysis of variance (ANOVA) and 1-way ANOVA at the 0.05 significance level. RESULTS: Except for Reciproc group (p > 0.05), PTU-R, R-Endo, and H-file systems extruded significantly more debris in severely curved canals (p < 0.05). Each file system caused more residual filling material in severely curved canals than in straight ones (p < 0.05). CONCLUSIONS: All instruments used in this study caused apical debris extrusion. Root canal curvature had an effect on extruded debris, except for Reciproc system. Clinicians should be aware that the difficult morphology of the severely curved root canals is a factor increasing the amount of extruded debris during the retreatment procedure.

Cyclic fatigue resistance and energy dispersive X-ray spectroscopy analysis of novel heat-treated nickel-titanium instruments at body temperature.

The aim of this study was to evaluate the cyclic fatigue resistance of Dia-X, WaveOne Gold and One Curve files in a water bath at intracanal temperature (35°C). Thirty-nine instruments Dia-X, WaveOne Gold, and One Curve systems (n = 13) were tested in an artificial canal with a curvature angle of 60° and a radius of 3 mm. A water bath setup at a temperature of 35°C was used to simulate the intracanal temperature and time to fracture (TTF) as seconds was recorded. The mean data were analyzed statistically using one-way ANOVA, and post hoc Tukey test (p = .05). The fractured surface of the instruments was examined with scanning electron microscopy (SEM) and chemical composition of the instruments were investigated with energy dispersive X-ray spectroscopy (EDS). Statistically significant differences were detected in TTF values of all the systems as follows: One Curve > WaveOne Gold > Dia-X (p < .05). One Curve instruments demonstrated the highest TTF values in all the tested instruments. The EDS microanalysis revealed similar NiTi composition of on the surface of One Curve, WaveOne Gold, and Dia-X instruments. The novel manufacturing process, including C-wire heat treatment and the variable cross-section of the One Curve files, could be the main factors affecting the fatigue life of the instruments.

Cyclic Fatigue Resistance of Multiused Reciproc Blue Instruments during Retreatment Procedure.

INTRODUCTION: Root canal retreatment procedure may reduce the mechanical resistance of nickel-titanium instruments and increase the frequency of instrument fracture. The aim of the present study was to evaluate the effect of multiuse of Reciproc Blue R25 instruments on cyclic fatigue resistance during retreatment procedure in mandibular molar teeth. METHODS: Forty-eight Reciproc Blue R25 files were included in the study. In control group, 12 new Reciproc Blue R25 instruments were subjected to cyclic fatigue test by using a stainless steel artificial canal with a 90° angle and 3-mm radius of curvatures. In experimental groups, Reciproc Blue R25 files (n = 12) were used to remove the root canal filling (RCF) material of 1, 2, and 3 molar teeth, respectively. Then cyclic fatigue tests of these 36 instruments were performed. The number of cycles to fracture (NCF) and the length of the fractured fragment were calculated for each instrument. Working time for retreatment procedures was determined in seconds with a digital chronometer. The data were analyzed by using one-way analysis of variance followed by post hoc Tukey test and mixed-effect analysis (P = .05). RESULTS: No significant difference was found between NCF values of new and first time used files (P > .05), but NCF values of new and first time used files were significantly higher than those of second and third time used files (P < .05). The second and third time used files revealed no difference (P > .05). As the number of uses increased, the average time for retreatment procedure statistically extended (P < .05). CONCLUSIONS: Reciproc Blue R25 instrument can be used to remove RCF material of 2 molar teeth. However, because of its decreased NCF values, multiple use over 2 molars may not be suggested.

Cyclic Fatigue Resistance of Novel Glide Path Instruments with Different Alloy Properties and Kinematics.

INTRODUCTION: The aim of the present study was to evaluate the cyclic fatigue resistance of the WaveOne Gold Glider (Dentsply Maillefer, Ballaigues, Switzerland), R-Pilot (VDW, Munich, Germany), and ProGlider (Dentsply Maillefer) glide path instruments. METHODS: Ten instruments from each glide path system were included in the study. A stainless steel artificial canal with a 90° angle and a 3-mm radius of curvature was used for the testing process. The working lengths of the instruments were fixed at 19 mm, and the instruments were operated using an endodontic motor (X-Smart Plus, Dentsply Maillefer) at recommended setting for each. A digital camera (Sony HDR-XR260; Sony Corporation, Minato, Tokyo, Japan) was positioned on the top of the cyclic fatigue test device, and the time to fracture was recorded in seconds by means of the video camera. For each instrument, the number of cycles to failure was calculated, and the length of the fractured fragment was measured. The data were analyzed using 1-way analysis of variance followed by the post hoc Tukey test. RESULTS: Statistically significant differences in the number of cycles to failure values were observed across the tested groups; the ranking of the instruments was as follows: WaveOne Gold Glider > R Pilot > ProGlider (P < .05). There was no significant difference in the mean length of the fractured fragment of the instruments (P > .05). CONCLUSIONS: Within the limitations of the present study, it can be concluded that improved alloy properties and reciprocating motion could enhance the cyclic fatigue resistance of glide path instruments.

Micro computed tomography evaluation of the Self-adjusting file and ProTaper Universal system on curved mandibular molars.

The aim of this investigation was to compare the cleaning and shaping efficiency of Self-adjusting file and Protaper, and to assess the correlation between root canal curvature and working time in mandibular molars using micro-computed tomography. Twenty extracted mandibular molars instrumented with Protaper and Self-adjusting file and the total working time was measured in mesial canals. The changes in canal volume, surface area and structure model index, transportation, uninstrumented area and the correlation between working-time and the curvature were analyzed. Although no statistically significant difference was observed between two systems in distal canals (p>0.05), a significantly higher amount of removed dentin volume and lower uninstrumented area were provided by Protaper in mesial canals (p<0.0001). A correlation between working-time and the canal-curvature was also observed in mesial canals for both groups (SAFr2 =0.792, p<0.0004, PTUr2=0.9098, p<0.0001).