The Influence of Starch Sweeteners on Functional Properties of Cellulose Fat Mimetics: Rheological and Textural Aspects.

Starch sweeteners are commonly used in many confectionery food products. Usually, considering the trend of producing low-energy and low-fat products, these products include fat mimetics. The aim of this study was to investigate the influence of fructose sweeteners on the development of functional properties of MCG fat mimetic, such as rheological and textural behavior. Fat mimetics made from Microcrystalline cellulose gel (MCG) consist of colloidal microcrystalline cellulose (MCC) and sodium carboxymethyl cellulose (NaCMC) and were observed in five different concentrations (1, 3, 5, 7, and 10%). The amount of starch sweetener in the mixture with the fat mimetics was 20%. The effect of pure crystalline fructose and a mixture of crystalline-fructose and high-fructose corn syrup in a ratio of 1:1 was analyzed. Rheological parameters significantly decreased with the application of starch sweeteners. By adding a mixture of starch sweeteners, this decrease was further increased by 10%. At higher gel concentrations of 5, 7, and 10%, the dominance of the elastic modulus G' was preserved. Texture parameters such as firmness, consistency, cohesiveness, and viscosity index were reduced accordingly. The presence of starch sweeteners significantly disrupted the networking of the three-dimensional structure of the MCG gel and the proper hydration process during the formation of fat mimetics.

Comparative characterization of sugar beet fibers to sugar beet pectin and octenyl succinic anhydride modified maltodextrin in aqueous solutions using viscometry, conductometry, tensiometry and component analysis.

BACKGROUND: Knowledge about specific functional characteristics, such as viscosimetric, conductometric, tensiometric and structural properties of polysaccharide aqueous solutions is highly important in the successful and adequate application in food emulsion formulation. For the first time detailed characterization of sugar beet fibers aqueous solutions in comparison to high molecular weight (sugar beet pectin) and low molecular weight [octenyl succinic anhydride (OSA) maltodextrin] hydrocolloids/stabilizers was performed through viscometry, conductometry, tensiometry and component analysis. RESULTS: Sugar beet fibers and its water-soluble fraction were investigated. All sugar beet fiber samples showed substantial surface-active properties but different effect on the viscosity values of aqueous solutions. Sugar beet pectin had higher impact on aqueous solutions viscosity values compared to sugar beet fiber samples. Structural bonding between investigated polysaccharides were evaluated through conductometric measurements. Intermolecular linking and probable embedding of OSA maltodextrin molecules into the sugar beet fiber complex structure was detected in conductometric studies. The increased concentration of sugar beet fibers in the presence of sugar beet pectin led to the accelerated increase in specific conductivity values indicating effects of 'macromolecular crowding', intermolecular and intramolecular conformation changes and charge formation. CONCLUSIONS: Detailed characterization of sugar beet fibers provided scientific insight towards fundamental characteristics of sugar beet fiber aqueous solutions. The presented characteristics are particularly applicable in the field of food emulsion stabilization due to the presented surface-active properties of sugar beet fibers as well as specific characteristics of investigated multi-polysaccharide systems. © 2022 Society of Chemical Industry.

Processing of alfalfa seeds by convective hot air drying, vacuum drying and germination: Proximate composition, techno-functional, thermal and structural properties evaluation.

The effect of convective hot air and vacuum drying alone and combined with germination on alfalfa seeds' proximate composition, techno-functional, thermal and structural properties was investigated. Corresponding properties of treated alfalfa samples were compared with those of commercially available alfalfa sprouts. Both drying and combined germination and drying treatments resulted in increased carbohydrates (41.99-48.82 %), TDF (10.51-12.51 %) and Mg contents (789.49-2119.24 mg/kg), while the reduction in ash, lipid and Fe content compared to raw alfalfa seeds was observed. Alfalfa seeds subjected to combined germination and drying treatment exhibited higher water and oil binding capacities, as well as emulsions with smaller volume mean droplet diameters compared to the raw and dried samples. Conducted treatments resulted in greater thermal stability of globulins and a slight decrease in crystallinity index, although alfalfa seeds' structure did not change significantly according to FTIR analysis. Differences in applied drying techniques on alfalfa seeds' properties were not observed.

The food industry by-products in bread making: single and combined effect of carob pod flour, sugar beet fibers and molasses on dough rheology, quality and food safety.

Obtaining high-quality value-added bread with extended shelf-life by utilizing food industry by-products that would have minimal negative effect on gluten structure while avoiding the usage of synthetic preservatives, was the challenge of this study. For this purpose the influence of the combination of carob pod flour (C, 0-15%), sugar beet fibers (F, 0-10%) and sugar beet molasses (M, 0-6%) on dough rheology and bread quality was investigated. Selected materials were of good microbiological quality, while carob flour and sugar beet fibers were rich in dietary fibers (43.6% and 67.0%, respectively). The presence of high share of dietary fibers (combination of C and F) increased dough resistance to extension up to 2.5 times, while dough extensibility was reduced by 50%. The addition of molasses had less pronounced single effect on dough properties however its impact in combination with fiber-rich materials outweighed the individual effect (an increase of dough resistance at about 55%). Molasses alone and in combination with other ingredients had positive effect on bread quality. Sample M6F5 attained crumb quality score (6.0 of maximum 7.0) higher than in control sample (5.6). High share of C and F reduced loaf volume and crumb quality of bread up to 56% and 50%, respectively and increased hardness 7.5 times. However, carob flour (7.5%) increased polyphenols content and antioxidant capacity 3 and 4 times, respectively. Moreover, carob flour and molasses and their combination showed inhibitory effect on mold mycelia growth and spores formation. Regarding all of the above, C7.5M3F5 was chosen as optimal sample.

Hepatoprotective Effect of Carob Pulp Flour (Ceratonia siliqua L.) Extract Obtained by Optimized Microwave-Assisted Extraction.

To examine antioxidant capacity and the hepatoprotective effect of carob pulp flour, microwave-assisted extraction was performed. The influence of ethanol concentration (0-40% w/w), extraction time (5-25 min) and irradiation power (400-800 W) on DPPH, FRAP and ABTS antioxidant activity of carob pulp flour extract was evaluated. The strongest influence was that of the ethanol concentration, followed by extraction time. Optimal process parameters for maximizing total antioxidant activity were determined, using response surface methodology: ethanol concentration 40%, time 25 min and power 800 W. Carob extract obtained at optimal conditions (CE) was analyzed in vivo using a paracetamol-induced hepatotoxicity model in mice. Treatment with CE attenuated the parameters of liver injury, especially aspartate and alanine aminotransferase activity, and prevented paracetamol-induced increase in malondialdehyde levels. Pretreatment with CE reversed the activities of superoxide dismutase, catalase, glutathione peroxidase and glutathione S-transferase enzymes after the high dose of paracetamol in the liver. Hepatotoxicity induced using a toxic dose of paracetamol was also seen through histopathological alterations, which were significantly reduced in the groups treated with CE prior to paracetamol. Still, the number of Kupffer cells and macrophages did not differ among groups. Finally, pretreatment of mice with CE and paracetamol significantly decreased the expression of cytochrome P450 2E1 (CYP2E1) in hepatocytes.

Waste Management in the Agri-Food Industry: The Conversion of Eggshells, Spent Coffee Grounds, and Brown Onion Skins into Carriers for Lipase Immobilization.

One of the major challenges in sustainable waste management in the agri-food industry following the "zero waste" model is the application of the circular economy strategy, including the development of innovative waste utilization techniques. The conversion of agri-food waste into carriers for the immobilization of enzymes is one such technique. Replacing chemical catalysts with immobilized enzymes (i.e., immobilized/heterogeneous biocatalysts) could help reduce the energy efficiency and environmental sustainability problems of existing chemically catalysed processes. On the other hand, the economics of the process strongly depend on the price of the immobilized enzyme. The conversion of agricultural and food wastes into low-cost enzyme carriers could lead to the development of immobilized enzymes with desirable operating characteristics and subsequently lower the price of immobilized enzymes for use in biocatalytic production. In this context, this review provides insight into the possibilities of reusing food industry wastes, namely, eggshells, coffee grounds, and brown onion skins, as carriers for lipase immobilization.

Impact of Short-Time Micronization on Structural and Thermal Properties of Sugar Beet Fibre and Inulin.

Research background: By tailoring dietary fibre's structural and physicochemical properties, their functionality and applicability can be remarkably increased. One of the approaches used in this respect is fibre particle size reduction. Accordingly, the present study explores the impact of short-time micronization in a planetary ball mill on structural and thermal changes of modified and commercial sugar beet fibre, inulin and sucrose for their potential application as food excipients. Experimental approach: Short-time micronization in a planetary ball mill (30 and 60 min) was applied for particle size reduction of modified and commercial sugar beet fibre, inulin and sucrose as less energy-consumptive and less destructive approach than long-time micronization. Dietary fibre and sucrose samples were characterised in terms of particle size, morphology, intermolecular bonds and presence of functional groups, crystallinity and thermal properties, before and after the short-time micronization. Results and conclusions: Particle size was successfully reduced to micron-scale already after 30 min of micronization in most of the samples without significant changes in thermal properties and crystallinity or present functional groups. An enhanced particle size decrease with prolonged micronization time (60 min) was noticed in modified sugar beet fibre with slightly wider particle size distribution than in other examined samples. Furthermore, morphology and exposure of the present functional groups in samples were altered by the micronization, which is favourable for their further application as excipients in the food matrix. Novelty and scientific contribution: The corresponding research reports the short-time micronization impact on sugar beet fibre and modified sugar beet fibre, inulin and sucrose for the first time, hence contributing to the widening of their application as excipients in diverse products.

Sugar beet and apple fibres coupled with hydroxypropylmethylcellulose as functional ingredients in gluten-free formulations: Rheological, technological and sensory aspects.

The presented study examined the influence of hydroxypropylmethylcellulose (HPMC), sugar beet fibre (SBF) and apple fibre (AF) incorporation coupled with adequate water levels on gluten-free (GF) batter rheology, bread quality and sensory characteristics. A Box-Behnken experimental design with independent variables: HPMC quantity (2-4 g/100 g), SBF and AF quantity (3-7 g/100 g) and water quantity (180-230 g/100 g depending on the fibre type) based on a maize flour/starch mixture was applied. GF breads with 4 g/100 g HPMC coupled with 3 g/100 g SBF and 7 g/100 g AF reached the highest specific volumes (2.44 cm3/g and 3.97 cm3/g) accompanied with the lowest crumb hardness (2.29 and 2.10 N, respectively). Appealing crust and crumb colour and good sensory characteristics were achieved in GF breads with 4 g/100 g HPMC and 3, 5 and 7 g/100 g SBF or AF. The corresponding GF breads showed enhanced fibre content (4.56-6.07 g/100 g).