New Scenarios for Training in Oral Radiology: Clinical Performance and Predoctoral Students' Perception of 3D-Printed Mannequins.

OBJECTIVES: This study aimed to evaluate the impact of 3D-printed mannequins on the training of predoctoral students. METHODS: Two 3D-printed training models were developed: a traditional model that simulates a sound adult patient and a customized model with pathological and physiological changes (impacted third molar and edentulous region). Students accomplished their pre-clinical training divided into a control group (CG, n = 23), which had access to the traditional model, and a test group (TG, n = 20), which had access to both models. Afterward, they performed a full mouth series on patients and filled out a perception questionnaire. Radiographs were evaluated for technical parameters. Descriptive statistics and the Mann-Whitney test were used to compare the groups. RESULTS: Students provided positive feedback regarding the use of 3D printing. The TG reported a more realistic training experience than the CG (p = 0.037). Both groups demonstrated good clinical performance (CG = 7.41; TG = 7.52), and no significant differences were observed between them. CONCLUSIONS: 3D printing is an option for producing simulators for pre-clinical training in Oral Radiology, reducing student stress and increasing confidence during clinical care.

Tomographic Planning of Dental Implants Using a Smartphone: Linear Measurements and Implant Selection-A Cross-Sectional Study.

PURPOSE: This study assessed the accuracy of linear measurements and dental implant selection performed in a smartphone application compared to a computer software. MATERIALS AND METHODS: Forty-four DICOM files from partially edentulous patients in the posterior region of the mandible were evaluated by three trained and calibrated examiners. Images were analyzed using three visualization methods: cross-sectional view (CScr) and coronal (CSco) plane using the CS 3D Imaging software, and coronal (DRco) plane using the DroidRender smartphone application. For the purpose of standardization, measurements of bone width and height were taken in the edentulous posterior region of the mandible, 10 mm posterior to the mental foramen. Dental implant selection was made according to Straumann® Standard implant catalog 2022/2023. Linear measurements were compared using the ANOVA test for repeated measurements and implant selection was compared using the Friedman test. Statistical analysis was performed using the SPSS software, considering a significance level of 5%. RESULTS: Linear measurements showed a statistically significant difference for bone width (p = 0.030), but not for height (p = 0.685). The choice of implant was not influenced by the visualization method (p = 0.614). CONCLUSION: It is possible to suggest the use of smartphone applications as an additional diagnostic tool for DICOM evaluation and dental implant planning in the posterior region of the mandible. Smartphone applications allow an assessment not limited to 2D images or to static environments. Therefore, information exchange and diagnostic opinion in emergency situations may be facilitated.

Smartphone Use for Tomographic Evaluation: Application in Endodontic Diagnosis.

INTRODUCTION: Portable equipment that allows quick exchanges of information, such as smartphones, is increasingly important in dentistry. Thus, they have become frequently used, with the potential to contribute to the tomographic evaluation. This study aimed to evaluate the accuracy of smartphone applications for diagnosing the root canal system (RCS) and measuring the root canal length. METHODS: Digital Imaging and Communications in Medicine files of 92 lower incisor teeth were evaluated by 2 trained and calibrated examiners using CS 3D Imaging software (Carestream Health, Rochester, NY) and 2 smartphone applications (DroidRender; Startm, Zhubei, Taiwan and Horos Mobile; iCat Solutions Ltd, Norwich, United Kingdom). The RCS was assessed according to Vertucci's classification, and the tooth length was measured using linear cusp-apex measurements. The diagnostic reference standard was obtained by the mode and the mean of the evaluations made by 3 experienced examiners using the CS 3D Imaging software. The diagnostic performance of RCS was evaluated using sensitivity (Se), specificity (Sp), and overall accuracy (Ac). Bland-Altman analysis was used to assess the agreement of linear measurements. RESULTS: The diagnostic tests showed similar performance between the smartphone applications (DroidRender: Se = 1.00, Sp = .95, and Ac = 0.97; Horos: Se = 0.95, Sp = .94, and Ac = 0.95) and the computer software (Se = 0.97-0.95, Sp = .93-0.96, and Ac = 0.95-0.96). The smartphone applications showed discrepancies greater than 1.0 mm for the dental lengths, which may signal relevant differences in some clinical situations. CONCLUSIONS: Smartphone applications offered similar diagnostic performance in comparison with the computer software for the RCS evaluation.

Utilização e percepção da tomografia computadorizada de feixe cônico por especialistas em cirurgia e traumatologia bucomaxilofacial para avaliação de terceiros molares inferiores impactados / Use and perception of cone beam computed tomography by oral & maxillofacial surgeons for impacted lower third molars evaluation

Objetivo: conhecer o perfil demográfico e as características que levam à solicitação de tomografia computa-dorizada de feixe cônico (TCFC) pelos especialistas em Cirurgia e Traumatologia Bucomaxilofacial (CTBMF) do estado do Rio Grande do Sul, para diagnóstico e planejamento cirúrgico de terceiros molares inferiores (3MI) impactados. Métodos: foram enviados questionários eletrônicos para todos os especialistas em CTBMF do RS. O questionário compreendia perguntas demográficas, clínicas e imaginológicas. O teste Qui-Quadra-do foi utilizado para verificar a associação entre as variáveis. Resultados: 115 questionários foram respondi-dos.O exame mais solicitado foi a panorâmica (95%). A TCFC foi solicitada por 50 especialistas (30 utilizam software). Localização do canal mandibular, dilaceração radicular e reabsorção do segundo molar são os aspectos mais avaliados na TCFC (P < 0,05); já o contato da raiz com o canal mandibular foi dito ser avaliado nos dois exames. Complicações permanentes foram relatadas por 21 especialistas, associadas a profissionais com maior tempo de graduação e/ou especialização (P < 0,05), mas não com o tipo de exame solicitado (P > 0,05). Na percepção dos especialistas, a TCFC tem papel importante em casos de alta complexidade. Con-clusão: a panorâmica ainda é o exame mais utilizado para avaliação de 3MI impactados pelos especialistas em CTBMF do RS, porém a TCFC tem sido solicitada para complementação do diagnóstico e planejamento e como meio de segurança jurídica do profissional.(AU)

Objective: to recognize the demographic profile and the characteristics that lead to the request of cone beam computed tomography (CBCT) by Oral & Maxillofacial (OMF) Surgeons in the state of RS for the diagnosis and surgical planning of impacted lower third molars (3LM). Methods: electronic questionnaires were sent to all OMF surgeons in RS. The questionnaire comprised demographic, clinical, and imaging questions. The chi-square test was used to verify the association between variables. Results: 115 questionnaires were answered. The most requested exam was the panoramic (95%). CBCT was requested by 50 specialists (30 use software). Localization of the mandibular canal, root dilaceration, and resorption of the second molar are the most evaluated aspects in the CBCT (P <0.05); the contact of the root with the mandibular canal was said to be evaluated in both exams. Permanent complications were reported by 21 OMF surgeons, and were related to the time of graduation and/or specialization (P < 0.05), but not to the type of exam (P > 0.05). In the OMF surgeons' perception, the CBCT has an important role in cases of high complexity. Conclusion: panoramic radiograph still is the most used exam for the assessment of impacted 3LM by OMF surgeons in RS, however, CBCT has been requested to complement the diagnosis and treatment plan, and as a means of professional legal security.(AU)

Efficacy of passive ultrasonic irrigation in removing root filling material during endodontic retreatment / Eficácia da irrigação ultrassônica passiva na remoção de material obturador durante o retratamento endodôntico

Introduction: The aim of endodontic retreatment is to remove the previous root filling materials completely to allow for the subsequent steps of cleaning, canal shaping and filling replacement. Objective: To evaluate the efficacy of passive ultrasonic irrigation (PUI) in the removal of residual root filling material after removing the bulk of the root filling with nickel-titanium rotary instruments. Material and method: Eighteen mesial isthmus-containing roots of human mandibular molars were prepared and filled. The root canal filling was removed with the ProTaper Retreatment system and K-files. The specimens were randomized into 2 groups (n = 9), both irrigated with 2.5% NaOCl and 17% EDTA. In the conventional group, an irrigation syringe was used. In the PUI group, the PUI technique was used. The roots were sectioned longitudinally and evaluated under stereomicroscopy. Student's t test was used to compare groups and the general linear model was used to compare the apical, cervical, and middle root thirds within each group, in regard to the percentages of remaining residual filling material. Result: There was no statistically significant intergroup difference, irrespective of which root third was evaluated (P > 0.05). In the PUI group, the apical third showed a significantly higher percentage of residual filling material, in comparison with the cervical (P = 0.038) and middle (P = 0.029) thirds. Conclusion The PUI technique was not more effective than the conventional irrigation technique in removing residual root filling material during endodontic retreatment in root canals with a complex anatomy.

Introdução: O retratamento endodôntico requer a remoção de todos os materiais obturadores para a limpeza, o preparo e a obturação subsequentes do canal radicular. Objetivo: Avaliar a eficácia da Irrigação Ultrassônica Passiva (IUP) na remoção de material obturador residual após a desobturação com sistema rotatório de níquel-titânio. Material e método: Dezoito raízes mesiais de molar inferior com istmos foram preparadas e obturadas. A obturação foi removida com o sistema rotatório ProTaper Retratamento e limas manuais tipo K. Os espécimes foram randomizados em dois grupos (n = 9), ambos irrigados com NaOCl a 2,5% e EDTA a 17%. No grupo Convencional, a seringa de irrigação foi utilizada. No grupo da IUP, a técnica da IUP foi usada. As raízes foram seccionadas longitudinalmente e avaliadas em estereomicroscópio. O teste t de Student foi usado para comparar os grupos e o modelo linear geral foi usado para comparar os terços cervical, médio e apical dentro de cada grupo, no que diz respeito a porcentagem de material obturador residual. Resultado: Não houve diferença estatisticamente significante entre os grupos, independentemente do terço do canal radicular analisado (P> 0.05). No grupo da IUP, o terço apical mostrou uma porcentagem significativamente mais alta de material obturador residual quando comparado aos terços cervical (P = 0.038) e médio (P= 0.029). Conclusão: A IUP não foi mais eficaz do que a técnica convencional na remoção de material obturador remanescente durante o retratamento endodôntico em canais radiculares com anatomia complexa.