Simulation of turbulence induced sound generation inside stenosed femoral artery models with different severities and eccentricities.

BACKGROUND AND OBJECTIVES: Recent developments of low-cost, compact acoustic sensors, advanced signal processing tools and powerful computational resources allow researchers design new scoring systems for acoustic detection of arterial stenoses. In this study, numerical simulations of blood flow inside stenosed arteries are performed to understand the effect of stenosis severity and eccentricity on the turbulence induced wall pressure fluctuations and the generated sound. METHODS: Axisymmetric and eccentric elliptic stenoses of five different severities are generated inside a 6.4 mm diameter femoral artery model. Large eddy simulations of pulsatile, non-Newtonian blood flow are performed using the open source software OpenFOAM. RESULTS: Post-stenotic turbulence activity is found to be almost zero for 50 and 60% severities. For severities of 75% and more, turbulent kinetic energy rises significantly with increasing severity. The location of the highest turbulence activity on the vessel wall from the stenosis exit decreases with increasing severity. The maximum level of turbulent kinetic energy seen in 95% severity models is about 9 and 31 times higher than that of 87% and 75% models, respectively. Spectrum of wall pressure fluctuations show that 50 and 60% axisymmetric models are almost silent. The spectrum starts to get richer with 75% severity, and the fluctuation intensity increases with severity. Compared to the axisymmetric models, more activity is observed in the 0-150 Hz band for the 50 and 60% eccentric models. Axial extent of the acoustically active region is also longer in them. Converting wall pressure data into sound revealed that murmurs that can be considered as signs of vascular stenosis are obtained for models with 75% and higher severity. CONCLUSIONS: Sound patterns generated from simulation results are similar to the typical sounds obtained by Doppler ultrasonography, and present distinct characters. Together with a sensor technology that can measure these sounds from within the stenosed artery, they can be processed and used for the purpose of non-invasive diagnosis. Computational fluid dynamics studies that simulate large number of cases with different stenosis severities and morphologies will play a critical role in developing the necessary sound databases, which can be used to train new diagnostic devices.

Effect of stenosis shape on the sound emitted from a constricted blood vessel.

Effect of stenosis shape on the post-stenotic pressure fluctuations and the sound emitted from a constricted blood vessel is studied numerically. Large eddy simulations are performed using OpenFOAM under pulsatile flow conditions with a non-Newtonian fluid model. Findings indicate that the high slope at the stenosis entrance and overlap of more than one stenosis shorten the length of the flow jet, trigger turbulence, and increase vortical activity, turbulent kinetic energy, and magnitude of pressure fluctuations at the post-stenotic region. Also, these morphological parameters strengthen the audible signal especially in the systolic phase of the pulsatile flow. On the other hand, asymmetry of the stenosis creates an opposite effect. Based on the wall pressure data, it is shown that the stenosis shape affects the intensity and the pattern of the murmurs generated. Stenosis shape is found to be an essential factor for the acoustic-based non-invasive diagnosis of stenosis. Graphical abstract Wall pressure content of the elliptic stenosis shape.

Numerical investigation of wall pressure fluctuations downstream of concentric and eccentric blunt stenosis models.

Pressure fluctuations that cause acoustic radiation from vessel models with concentric and eccentric blunt stenoses are investigated. Large eddy simulations of non-pulsatile flow condition are performed using OpenFOAM. Calculated amplitude and spatial-spectral distribution of acoustic pressures at the post-stenotic region are compared with previous experimental and theoretical results. It is found that increasing the Reynolds number does not change the location of the maximum root mean square wall pressure, but causes a general increase in the spectrum level, although the change in the shape of the spectrum is not significant. On the contrary, compared to the concentric model at the same Reynolds number, eccentricity leads to an increase both at the distance of the location of the maximum root mean square wall pressure from the stenosis exit and the spectrum level. This effect becomes more distinct when radial eccentricity of the stenosis increases. Both the flow rate and the eccentricity of the stenosis shape are evaluated to be clinically important parameters in diagnosing stenosis.

A parylene-based dual channel micro-electrophoresis system for rapid mutation detection via heteroduplex analysis.

A new dual channel micro-electrophoresis system for rapid mutation detection based on heteroduplex analysis was designed and implemented. Mutation detection was successfully achieved in a total separation length of 250 microm in less than 3 min for a 590 bp DNA sample harboring a 3 bp mutation causing an amino acid change. Parylene-C was used as the structural material for fabricating the micro-channels as it provides conformal deposition, transparency, biocompatibility, and low background fluorescence without any surface treatment. A new dual channel architecture was derived from the traditional cross-channel layout by forming two identical channels with independent sample loading and waste reservoirs. The control of injected sample volume was accomplished by a new u-turn injection technique with pull-back method. The use of heteroduplex analysis as a mutation detection method on a cross-linked polyacrylamide medium provided accurate mutation detection in an extremely short length and time. The presence of two channels on the microchip offers the opportunity of comparing the sample to be tested with a desired control sample rapidly, which is very critical for the accuracy and reliability of the mutation analyses, especially for clinical and research purposes.

Numerical study of the aerodynamic effects of septoplasty and partial lateral turbinectomy.

OBJECTIVES: To investigate, first, the effects of septal deviation and concha bullosa on nasal airflow, and second, the aerodynamic changes induced by septoplasty and partial lateral turbinectomy, using computational fluid dynamics (CFD). METHODS: A three-dimensional model of a nasal cavity was generated using paranasal sinus computed tomography images of a cadaver with concha bullosa and septal deviation. Virtual septoplasty and partial lateral turbinectomy were performed on this model to generate a second model representing the postoperative anatomy. Aerodynamics of the nasal cavity in the presence of concha bullosa and septal deviation as well as postoperative changes due to the virtual surgery were analyzed by performing CFD simulations on both models. Inspiratory airflow with a constant flow rate of 500 mL/second was used throughout the analyses. RESULTS: In the preoperative model, the airflow mostly pass through a narrow area close to the base of the nasal cavity. Following the virtual operation, a general drop in the maximum intranasal air speed is observed with a significant increase of the airflow through right middle meatus. While in the preoperative model the greatest reduction in pressure is found to be in the localization of anterior septal deviation on the right side and confined to a very short segment, for the postoperative model, it is observed to be in the nasal valve region in both nasal cavities. Following septoplasty and partial lateral turbinectomy, total nasal resistance is reduced significantly. CONCLUSIONS: CFD simulations promise to make great contributions to understand the airflow characteristics of healthy and pathologic noses. Before surgery, planning for any specific intervention using CFD techniques on the nasal cavity model of the patient may help foreseeing the aerodynamic effects of the operation and might increase the success rate of the surgical treatment.