A Synchronous Fluorescence Spectrofluorometric Method for the Simultaneous Determination of Clonazepam and Paroxetine Hydrochloride in Combined Pharmaceutical Dose Form.

OBJECTIVES: First derivative synchronous spectrofluorimetry has been found to be superior because of its highly specific spectral discrimination and readily available solvent, it is economical, eco-friendly, and lacks an extraction procedure. MATERIALS AND METHODS: In the present study, a new simple, sensitive, and time-saving first derivative synchronous spectrofluorimetry method has been developed for simultaneous estimation of clonazepam (CLO) and paroxetine hydrochloride (PH) in pharmaceutical dose forms. RESULTS: CLO was determined at the emission wavelength of 512.79 nm (zero-crossing wavelength point of PH). Similarly, PH was measured at 336.00 nm (zero-crossing wavelength point of CLO). The first derivative amplitude-concentration plots were rectilinear over the range of 1-5 µg/ mL for CLO and 5-25 µg/mL for PH. The method was validated statistically as per the ICH guidelines. The limits of detection were 0.055 and 0.033 µg/mL and quantification limits were 0.169 and 0.102 µg/mL for CLO and PH, respectively. The percentage recovery in commercial formulation was found to be in the range 100.45% and 99.38% for CLO and PH, respectively, by the proposed method, and percent relative standard deviation values for precision and accuracy studies were found to be less than 2. CONCLUSION: This spectrofluorimetry method has been found to have several advantages such as simple spectra, high selectivity, and low interference. By virtue of its high sensitivity, this method could be applied to the analysis of both CLO and PH in their co-formulated dose forms.

Validated high-performance thin-layer chromatographic (HPTLC) method for simultaneous determination of nadifloxacin, mometasone furoate, and miconazole nitrate cream using fractional factorial design.

A high-performance thin-layer chromatographic method for simultaneous determination of nadifloxacin, mometasone furoate, and miconazole nitrate was developed and validated as per International Conference on Harmonization guidelines. High-performance thin-layer chromatographic separation was performed on aluminum plates precoated with silica gel 60F254 and methanol:ethyl acetate:toluene: acetonitrile:3M ammonium formate in water (1:2.5:6.0:0.3:0.2, % v/v) as optimized mobile phase at detection wavelength of 224 nm. The retardation factor (Rf) values for nadifloxacin, mometasone furoate, and miconazole nitrate were 0.23, 0.70, and 0.59, respectively. Percent recoveries in terms of accuracy for the marketed formulation were found to be 98.35-99.76%, 99.36-99.65%, and 99.16-100.25% for nadifloxacin, mometasone furoate, and miconazole nitrate, respectively. The pooled percent relative standard deviation for repeatability and intermediate precision studies was found to be < 2% for three target analytes. The effect of four independent variables, methanol content in total mobile phase, wavelength, chamber saturation time, and solvent front, was evaluated by fractional factorial design for robustness testing. Amongst all four factors, volume of methanol in mobile phase appeared to have a possibly significant effect on retention factor of miconazole nitrate compared with the other two drugs nadifloxacin and mometasone furoate, and therefore it was important to be carefully controlled. In summary, a novel, simple, accurate, reproducible, and robust high-performance thin-layer chromatographic method was developed, which would be of use in quality control of these cream formulations.

Central Composite Design for Validation of HPTLC Method for Simultaneous Estimation of Olmesartan Medoxomil, Amlodipine Besylate and Hydrochlorothiazide in Tablets.

High performance thin layer chromatographic method for simultaneous estimation of olmesartan medoxomil, amlodipine besylate and hydrochlorothiazide was developed and validated as per ICH guidelines. Moreover, robustness testing was performed applying a central composite design with k factor having 2(k) factorial runs, 2k axial experiments and two center points. High performance thin layer chromatographic separation was performed on aluminium plates precoated with silica gel 60F254 and toluene:chloroform:methanol:acetonitrile:formic acid (2:7:1.8:0.8:0.2% v/v) as optimized mobile phase. The detection wavelength for simultaneous estimation of three drugs was 232nm. The Rf values for olmesartan medoxomil, amlodipine besylate and hydrochlorthiazide were 0.78, 0.20 and 0.45, respectively. Percent recoveries in terms of accuracy for the marketed formulation was found to be 101.3-104.4, 100.7-104 and 101.5-103.9 for, olmesartan medoxomil, amlodipine besylate and hydrochlorthiazide, respectively. The pooled %relative standard deviation values for repeatability studies and intermediate precision studies was found to be less than 2% for olmesartan medoxomil, amlodipine besylate and hydrochlorthiazide, respectively. All the three factors evaluated in the robustness testing by central composite design were found to have an insignificant effect on the retention factor. However, methanol content in total mobile phase as a factor appeared to have significant effect on robustness, compared to band size and developing distance and hence it is important to be carefully controlled. In summary, a novel, simple, accurate and reproducible high performance thin layer chromatographic method was developed, which would be of use in quality control of these tablets.

Cleaning validation: quantitative estimation of atorvastatin in production area.

Carefully designed cleaning validation and its evaluation can ensure that residues of active pharmaceutical ingredient will not carry over and cross-contaminate the subsequent product. UV spectrophotometric and total organic carbon-solid sample module (TOC-SSM) method was developed and validated for the verification and determination of atorvastatin residues in the production area and to confirm the efficiency of the cleaning procedure as per ICH guideline. Atorvastatin was selected on the basis of a worst-case rating approach. It exhibited good linearity in the range of 5 to 25 µg/mL for UV spectrophotometric and 7300 to 83800 µg for the TOC-SSM method. The limit of detection was 0.419 µg/mL and 4.19 µg in the UV spectrophotometric and TOC-SSM methods, respectively. The limit of quantitation was 1.267 µg/mL and 12.69 µg in UV spectrophotometric and TOC-SSM methods, respectively. Percentage recovery from spiked stainless steel plates was found to be 95.37% and 92.82% in UV spectrophotometric and TOC-SSM methods, respectively. The calculated limit of acceptance per swab for atorvastatin (35.65 µg/swab) was not exceeded during three consecutive batches of production after cleaning procedure. Both proposed methods are suitable for quantitative determination of atorvastatin on manufacturing equipment surfaces well below the limit of contamination. The ease of sample preparation permits fast and efficient application of the proposed methods in quantitation of atorvastatin residue with precision and accuracy. Above all, the methodology is of low cost, and is a simple and less time-consuming alternative to confirm the efficiency of the cleaning procedure in pharmaceutical industries. LAY ABSTRACT: Carefully designed cleaning validation and its evaluation can ensure that residues of active pharmaceutical ingredient will not carry over and cross-contaminate the subsequent product. Atorvastatin was identified as a potential candidate among existing drug substances in production areas based on a worst-case rating approach. Atorvastatin residues were detected and quantified below acceptance limits after cleaning of production equipment using two proposed methods, namely, the UV spectrophotometric and total organic carbon-solid sample module (TOC-SSM) methods. The ease of sample preparation permits fast and efficient application of the proposed methods in quantitation of atorvastatin residue in production equipment area to confirm the efficiency of the cleaning procedure in pharmaceutical industries. Above all, the methodology is of low cost, and is a simple and less time-consuming alternative for cleaning validation.

Hepatoprotection through regulation of voltage dependent anion channel expression by Amomum subulatum Roxb seeds extract.

BACKGROUND AND PURPOSE: Voltage dependent anion channel (VDAC) plays an important role in triggering the opening of the mitochondrial permeability transition pore (PTP) that leads to mitochondrial damage and induce apoptic or necrotic cell death. In the present study, the methanolic extract of Amomum subulatum Roxb. seeds (MEAS) was used to examine its effect on VDAC. Aminotransferase activity, mitochondrial membrane potential, calcium-induced liver MPT, and VDAC expression were used to evaluate the hepato protective effect of MEAS. RESULTS: Pretreatment of mice with MEAS (100 and 300 mg/kg) significantly blocked the CCl(4)-induced increase in AST and ALT activities. Pretreatment with MEAS showed significant preservation of mitochondrial membrane potential as compared to CCl(4) control demonstrating the mitochondrial protection. In addition, pretreatment with MEAS at various concentrations exerted a dose-dependent effect against sensitivity to mitochondrial swelling induced by calcium. In addition, MEAS (300 mg/kg) significantly increased the transcription and translation of VDAC. CONCLUSION: Our data suggest that MEAS significantly prevents the damage to liver mitochondria through regulation of VDAC expression.