Physicochemical characterisation of kafirins extracted from sorghum grain and dried distillers grain with solubles related to their biomaterial functionality.

Kafirin, the hydrophobic prolamin storage protein in sorghum grain is enriched when the grain is used for bioethanol production to give dried distillers grain with solubles (DGGS) as a by-product. There is great interest in DDGS kafirin as a new source for biomaterials. There is however a lack of fundamental understanding of how the physicochemical properties of DDGS kafirin having been exposed to the high temperature conditions during ethanol production, compare to kafirin made directly from the grain. An understanding of these properties is required to catalyse the utilisation of DDGS kafirin for biomaterial applications. The aim of this study was to extract kafirin directly from sorghum grain and from DDGS derived from the same grain and, then perform a comparative investigation of the physicochemical properties of these kafirins in terms of: polypeptide profile by sodium-dodecyl sulphate polyacrylamide gel electrophoresis; secondary structure by Fourier transform infra-red spectroscopy and x-ray diffraction, self-assembly behaviour by small-angle x-ray scattering, surface morphology by scanning electron microscopy and surface chemical properties by energy dispersive x-ray spectroscopy. DDGS kafirin was found to have very similar polypeptide profile as grain kafirin but contained altered secondary structure with increased levels of ß-sheets. The structure morphology showed surface fractals and surface elemental composition suggesting enhanced reactivity with possibility to endow interfacial wettability. These properties of DDGS kafirin may provide it with unique functionality and thus open up opportunities for it to be used as a novel food grade biomaterial.

Alginate-based drug oral targeting using bio-micro/nano encapsulation technologies.

INTRODUCTION: Oral delivery is the most common administrated drug delivery path. However, oral administration of lipophilic drugs has some limitations: they have poor dose-response due to low and varied dissolution kinetics and oral bioavailability with sub-optimal dissolution within the aqueous gastrointestinal microenvironment. Therefore, there is a need for robust formulating methods that protect the drug until it reaches to its optimum absorption site, allowing its optimum pharmacological effects via increasing its intestinal permeation and bioavailability. AREA COVERED: Herein, we provide insights on orally administered lipophilic drug delivery systems. The detailed description of the obstacles associated with the oral bioavailability of lipophilic drugs are also discussed. Following this, techniques to overcome these obstacles with much emphasis on optimal safety and efficacy are addressed. Newly designed ionic vibrational jet flow encapsulation technology has enormous growth in lipophilic drug delivery systems, which is discussed thereafter. EXPERT OPINION: Researchers have shown interest in drug's encapsulation. A combination of drug-bile acid and microencapsulation methods can be one promising strategy to improve the oral delivery of lipophilic drugs. However, the most critical aspect of this approach is the selection of bile acids, polymer, and encapsulation technology.

Ultrasound treatment: effect on physicochemical, microbial and antioxidant properties of cherry (Prunus avium).

The cherry was treated with ultrasonic waves (33 kHz, 60 W) at different time intervals (10, 20, 30, 40, 60 min) and study was carried out to analyze the change in physico-chemical properties (TSS, pH, color, acidity and firmness), antioxidant potential and microbial load of the fruit during the storage period of 15 days at 4 °C. It was observed that ultrasound treatment (US) between 30 and 40 min showed better retention of color of the fruit during the storage period. The antioxidant assays (DPPH, ABTS and TPC) also increased significantly (P ≤ 0.05) up to 40 min, however the firmness of the fruit was affected and it showed a significant decrease beyond 20 min of US treatment. The sample with 40 min US treatment showed significantly less microbial load than other samples. The 20-40 min US treatment time (33 kHz, 60 W) was suggested for preservation of cherry during the storage at 4 °C.

Effect of infrared and microwave radiations on properties of Indian Horse Chestnut starch.

Starch extracted from Indian Horse Chestnut (IHCN) was subjected to infrared and microwave radiations for different time intervals (15 s, 30 s, & 45 s) at constant dose. The structural change of MW and IR radiated IHCN starches were determined by Fourier transform-infra red spectroscopy. The increased peak intensity at 3240 cm(-1) of treated starch represents more exposure of hydroxyl groups due to radiation. Granule morphology of native starch showed round and elliptical granules with smooth surfaces. However radiation treatment resulted in the development of surface cracks. Effect of radiation on physicochemical properties of starch revealed increase in water absorption capacity and light transmittance and decrease in apparent amylose content, pH, and syneresis. The peak, trough, final, and setback viscosities were significantly reduced with increase in treatment time. Radiated starches displayed significantly lower values of To,Tp, and ΔHgel than native starch. Further antioxidant activities were evaluated by DPPH and FRAP assays. Results showed significant improvement in antioxidant activity of starch by both MW and IR treatments.

Art and Science behind Modified Starch Edible Films and Coatings: A Review.

Technological advances have led to increased constraints regarding food packaging, mainly due to environmental issues, consumer health concerns, and economic restrictions associated therewith. Hence, food scientists and technologists are now more focused on developing biopolymer packages. Starch satisfies all the principal aspects making it a promising raw material for edible coatings/films. Modified starch has grabbed much attention, both at the academic as well as at the industrial level, because these films exhibit dramatic improvement in filming properties without involving any significant increase in cost of production. Various methods, additives used, and recent advances in the field of starch film production are discussed in detail in this review, which also provides an overview of the available information along with recent advances in modified starch film packaging.

Characterization of cookies made from wheat flour blended with buckwheat flour and effect on antioxidant properties.

Buckwheat flour was incorporated into wheat flour at different levels (0, 20, 40, 60, 80, and 100 %) and the physicochemical, functional and antioxidant properties of the blended flour were studied. This study also investigated the effect of buckwheat on the retention of antioxidant properties of cookies during baking. The results showed significant variation in physicochemical and functional properties of the blended flour. The addition of buckwheat flour into wheat flour also increased the antioxidant properties of blended flour proportionally, but metal chelating properties decreased. The incorporation of buckwheat in wheat flour helped in better retention of antioxidant potential of cookies during baking process as buckwheat cookies (100 % buckwheat) showed greater percentage increase in antioxidant properties than control (100 % wheat). Quality characteristics of cookies such as hardness and spread ratio decreased, while as non-enzymatic browning (NEB) increased significantly with increase in the proportion of buckwheat flour in wheat flour. The Overall acceptability of cookies by sensory analysis was highest at 40 % level of blending. This study concluded that addition of buckwheat in wheat flour, may not only improve the physico-chemical and functional properties of the blended flour but may also enhance the nutraceutical potential of the product prepared from it.

Effect of green tea powder on thermal, rheological & functional properties of wheat flour and physical, nutraceutical & sensory analysis of cookies.

Green tea powder (GTP) was incorporated in wheat flour at different levels (1, 2 and 4 %) and its effect on quality parameters of flour and cookies were studied. Thermal analysis showed that addition of GTP did not increase the onset temperature, end temperature and enthalpy of flour significantly. However, the increase in GTP content retarded the retro gradation of the gelatinized wheat flour gel and decreased the water absorption capacity, Oil absorption capacity, water solubility index, Foam capacity and foam stability significantly. The L* and b* values of cookies decreased from 53.63 to 33.23 and 29.02 to 24.39 respectively, while as, a* value showed an increase from 3.61 to 5.23 indirect proportion to quantity added. The addition of GTP to wheat flour increased the DPPH (2,2-diphenyl-1-picrylhydrazyl) percent inhibition and reducing power of cookies. Further, it also increases the acceptability for color, aroma and taste; however it loosened its structural integrity and decreased the fracture force.