RESUMO
We present a continuously tunable optical frequency comb generator (OFCG), with comb lines spanning over 3.8 THz which, to the best of our knowledge, is the widest span yet reported for a single-phase modulator OFCG system. The line spacing, exactly determined by a microwave reference, can be continuously tuned and, by heterodyning two lines, enables the generation of a continuously tunable electrical signal from 122.5 GHz to >2.7 THz. The composite noise of the heterodyne between two lines has been measured up to a record frequency of 300 GHz and is -75 dBc/Hz at 10 kHz offset at 300 GHz, limited by the multiplied phase noise of the reference synthesizer.
RESUMO
The filter bank multicarrier (FBMC) modulation format is considered as a potential candidate for future wireless 5G due to its feature of high suppression for out-of-band emissions, which allows combining multiple sub-bands with very narrow band-gaps, and hence increases the overall wireless transmission capacity. In this paper, we experimentally demonstrate the generation of multi sub-bands FBMC signals at millimeter-wave (mm-wave) for radio-over-fiber (RoF) systems. The designed multi sub-bands FBMC system consists of 5 sub-bands of 800 MHz with inter sub-band gaps of 781.25 kHz. The composite 5 sub-bands FBMC signal is generated with no band-gap between dc to the first sub-band to preserve the bandwidth of the system. Each FBMC sub-band consists of 1024 sub-carriers and is modulated with uncorrelated data sequences. The aggregate FBMC signal is carried optically by externally modulating a free running laser and is converted to millimeter waves (mm-waves) by photomixing with another free running laser at a frequency offset of 53 GHz. At the receiver, the received electrical mm-wave signal is down-converted to an intermediate frequency (IF) and then post-processed using digital signal processing (DSP) techniques. With the use of the simple recursive least square (RLS) equalizer in the DSP receiver, the achieved aggregate data rate is 8 Gbps and 12 Gbps for 16 quadrature amplitude modulation (QAM), and 64 QAM, respectively with a total bandwidth of 4.2 GHz. The system performance is evaluated by measuring error vector magnitude (EVM) and bit error rate (BER) calculations.
RESUMO
We report the first demonstration of a uni-traveling carrier photodiode (UTC-PD) used as a 5 Gbps wireless receiver. In this experiment, a 35.1 GHz carrier was electrically modulated with 5 Gbps non-return with zero on-off keying (NRZ-OOK) data and transmitted wirelessly over a distance of 1.3 m. At the receiver, a UTC-PD was used as an optically pumped mixer (OPM) to down-convert the received radio frequency (RF) signal to an intermediate frequency (IF) of 11.7 GHz, before it was down-converted to the baseband using an electronic mixer. The recovered data show a clear eye diagram, and a bit error rate (BER) of less than 10-8 was measured. The conversion loss of the UTC-PD optoelectronic mixer has been measured at 22 dB. The frequency of the local oscillator (LO) used for the UTC-PD is defined by the frequency spacing between the two optical tones, which can be broadly tuneable offering the frequency agility of this photodiode-based receiver.
RESUMO
We experimentally demonstrate photonic generation of a multichannel THz wireless signal at carrier frequency 200 GHz, with data rate up to 75 Gbps in QPSK modulation format, using an optical heterodyne technique and digital coherent detection. BER measurements were carried out for three subcarriers each modulated with 5 Gbaud QPSK or for two subcarriers modulated with 10 Gbaud QPSK, giving a total speed of 30 Gbps or 40 Gbps, respectively. The system evaluation was also performed with three subcarriers modulated with 12.5 Gbaud QPSK (75 Gbps total) without and with 40 km fibre transmission. The proposed system enhances the capacity of high-speed THz wireless transmission by using spectrally efficient modulated subcarriers spaced at the baud rate. This approach increases the overall transmission capacity and reduces the bandwidth requirement for electronic devices.