Quantifying Dielectric Material Charge Trapping and De-Trapping Ability Via Ultra-Fast Charge Self-Injection Technique.

Recently, utilizing the air breakdown effect in the charge excitation strategy proves as an efficient charge injection technique to increase the surface charge density of dielectric polymers for triboelectric nanogenerators (TENGs). However, quantitative characterization of the ability of dielectric polymers to trap reverse charges and the effect on the startup time of secondary self-charge excitation (SSCE) are essential for extensive applications. Here, an ultra-fast charge self-injection technique based on a self-charge excitation strategy is proposed, and a standard method to quantify the charge trapping and de-trapping abilities of 23 traditional tribo-materials is introduced. Further, the relationship among the distribution of dielectric intrinsic deep, shallow trap states, and transportation of trapped charges is systematically analyzed in this article. It shows that the de-trapping rate of charges directly determines the reactivation and failure of SSCE. Last, independent of TENG contact efficiency, an ultra-high charge density of 2.67 mC m-2 and an ultra-fast startup time of SSCE are obtained using a 15 µm poly(vinylidene fluoride-trifluoroethylene) film, breaking the historical record for material modification. As a standard for material selection, this work quantifies the charge trapping and de-trapping ability of the triboelectric dielectric series and provides insights for understanding the charge transport in dielectrics.

Conversion of Dielectric Surface Effect into Volume Effect for High Output Energy.

Improving the output energy and durability of triboelectric nanogenerators (TENGs) remains a considerable challenge for their practical applications. Owing to the interface effect of triboelectrification and electrostatic induction, thinner films with higher dielectric constants yield a higher output; however, they are not durable for practical applications. Herein, the dielectric surface effect is changed into a volume effect by adopting a millimeter-thick dielectric film with an inner porous network structure so that charges can hop in the surface state of the network. Charge migration inside the dielectric film is the key factor affecting the output of the triboelectric nanogenerator (TENG) with a thick film, based on which each working stage follows the energy-maximization principle in the voltage-charge plot. The maximum peak and average power densities of the TENG with polyurethane foam film in 1 mm thickness reach 40.9 and 20.7 W m-2  Hz-1 , respectively, under environmental conditions, and the output charge density is 5.14 times that of TENGs with a poly(tetrafluoroethylene) film of the same thickness. Superdurability is achieved in the rotary-mode TENG after 200 000 operation cycles. This study identifies the physical mechanism of the thick dielectric film used in TENGs and provides a new approach to promote the output and durability of TENGs.

Harvesting Environment Mechanical Energy by Direct Current Triboelectric Nanogenerators.

As hundreds of millions of distributed devices appear in every corner of our lives for information collection and transmission in big data era, the biggest challenge is the energy supply for these devices and the signal transmission of sensors. Triboelectric nanogenerator (TENG) as a new energy technology meets the increasing demand of today's distributed energy supply due to its ability to convert the ambient mechanical energy into electric energy. Meanwhile, TENG can also be used as a sensing system. Direct current triboelectric nanogenerator (DC-TENG) can directly supply power to electronic devices without additional rectification. It has been one of the most important developments of TENG in recent years. Herein, we review recent progress in the novel structure designs, working mechanism and corresponding method to improve the output performance for DC-TENGs from the aspect of mechanical rectifier, tribovoltaic effect, phase control, mechanical delay switch and air-discharge. The basic theory of each mode, key merits and potential development are discussed in detail. At last, we provide a guideline for future challenges of DC-TENGs, and a strategy for improving the output performance for commercial applications.

Large Harvested Energy by Self-Excited Liquid Suspension Triboelectric Nanogenerator with Optimized Charge Transportation Behavior.

To enhance the durability of triboelectric nanogenerator (TENG), liquid lubrication has been used to reduce mechanical abrasion. However, as the charge transportation behavior in dielectric liquid is not clearly understood, the output energy is still low although some improvements have been reported. Herein, the charge transportation behaviors in dielectric liquid by self-excited liquid suspension triboelectric nanogenerator (LS-TENG) are systematically investigated. The important role of solid-liquid triboelectrification effect, charge-liquid transmission and dissipation effect, and the homogeneous dielectric induction effect in promoting its output performance is found. The LS-TENG with a dual dielectric tribolayer has advantages of slight driving force and long lifetime for harvesting micro energy. The output of LS-TENG remains almost constant for more than 234 k operating cycles. A high charge density of 704 µC m-2 is obtained, 2.7 times as much as that of the current highest record in non-contact TENG. Additionally, the rotary LS-TENG lights up 4200 LEDs and continuously powers a variety of wireless sensors by harvesting wind energy at low wind speed. This work provides an important insight toward the charge transportation mechanism in dielectric liquid, and a prospective strategy for achieving highly robust TENG in micro energy harvesting for practical applications.

Ultrahigh Performance Triboelectric Nanogenerator Enabled by Charge Transmission in Interfacial Lubrication and Potential Decentralization Design.

Triboelectric nanogenerator (TENG) is a promising strategy for harvesting low frequency mechanical energy. However, the bottlenecks of limited electric output by air/dielectric breakdown and poor durability by material abrasion seriously restrict its further improvement. Herein, we propose a liquid lubrication promoted sliding mode TENG to address both issues. Liquid lubrication greatly reduces interface material abrasion, and its high breakdown strength and charge transmission effect further enhance device charge density. Besides, the potential decentralization design by the voltage balance bar effectively suppresses the dielectric breakdown. In this way, the average power density up to 87.26 W·m-2·Hz-1, energy conversion efficiency of 48%, and retention output of 90% after 500,000 operation cycles are achieved, which is the highest average power density and durability currently. Finally, a cell phone is charged to turn on by a palm-sized TENG device at 2 Hz within 25 s. This work has a significance for the commercialization of TENG-based self-powered systems.

High Output Performance and Ultra-Durable DC Output for Triboelectric Nanogenerator Inspired by Primary Cell.

Triboelectric nanogenerator (TENG) is regarded as an effective strategy to convert environment mechanical energy into electricity to meet the distributed energy demand of large number of sensors in the Internet of Things (IoTs). Although TENG based on the coupling of triboelectrification and air-breakdown achieves a large direct current (DC) output, material abrasion is a bottleneck for its applications. Here, inspired by primary cell and its DC signal output characteristics, we propose a novel primary cell structure TENG (PC-TENG) based on contact electrification and electrostatic induction, which has multiple working modes, including contact separation mode, freestanding mode and rotation mode. The PC-TENG produces DC output and operates at low surface contact force. It has an ideal effective charge density (1.02 mC m-2). Meanwhile, the PC-TENG shows a superior durability with 99% initial output after 100,000 operating cycles. Due to its excellent output performance and durability, a variety of commercial electronic devices are powered by PC-TENG via harvesting wind energy. This work offers a facile and ideal scheme for enhancing the electrical output performance of DC-TENG at low surface contact force and shows a great potential for the energy harvesting applications in IoTs.

Achieving Remarkable Charge Density via Self-Polarization of Polar High-k Material in a Charge-Excitation Triboelectric Nanogenerator.

Boosting output charge density is top priority for achieving high-performance triboelectric nanogenerators (TENGs). The charge-excitation strategy is demonstrated to be a superior approach to acquire high output charge density. Meanwhile, the molecular charge behaviors in the dielectric under a strong electric field from high charge density bring new physics that are worth exploring. Here, a rapid self-polarization effect of a polar dielectric material by the superhigh electric field in a charge-excitation TENG is reported, by which the permittivity of the polar dielectric material realizes self-increase to a saturation, and thus enhances the output charge density. Consequently, an ultrahigh charge density of 3.53 mC m-2 is obtained with 7 µm homemade lead zirconate titanate-poly(vinylidene fluoride) composite film in the atmosphere with 5% relative humidity, which is the highest charge density for TENGs with high durability currently. This work provides new guidance for dielectric material optimization under charge excitation to boost the output performance of TENGs toward practical applications.

An Ultrarobust and High-Performance Rotational Hydrodynamic Triboelectric Nanogenerator Enabled by Automatic Mode Switching and Charge Excitation.

The triboelectric nanogenerator (TENG) is an emerging technology for ambient mechanical energy harvesting, which provides a possibility to realize wild environment monitoring by self-powered sensing systems. However, TENGs are limited in some practical applications as a result of their low output performance (low charge density) and mechanical durability (material abrasion). Herein, an ultrarobust and high-performance rotational TENG enabled by automatic mode switching (contact mode at low speed and noncontact at high speed) and charge excitation is proposed. It displays excellent stability, maintaining 94% electrical output after 72 000 cycles, much higher than that of the normal contact-mode TENG (30%). Due to its high electrical stability and large electrical output, this TENG powers 944 green light-emitting diodes to brightness in series. Furthermore, by harvesting water-flow energy, various commercial capacitors can be charged quickly, and a self-powered fire alarm and self-powered temperature and humidity detection are realized. This work provides an ideal scheme for enhancing the mechanical durability, broadening the range of working frequency, and improving the electrical output of TENGs. In addition, the high-performance hydrodynamic TENG demonstrated in this work will have great applications for Internet of Things in remote areas.

Enlarged responsivity-ZnO honeycomb nanomaterials UV photodetectors with light trapping effect.

The ability of ZnO photodetectors to absorb UV light plays a key role in enhancing responsivity and performance in electronic, optical, and photonic devices. Herein, the light trapping effect of ZnO is used to design and fabricate a novel honeycomb-like ZnO nanomaterial-based UV photodetector with an excellent photoelectric performance. Compared with the traditional ZnO film UV photodetector, the photoresponsivity of the film with honeycomb nanomaterials can reach up to 4.79 A W-1, which is an improvement of about 300 times. In addition, the honeycomb ZnO nanomaterials UV photodetectors exhibit an improved light absorption, a very photo-to-dark current ratio (2.46 × 103), and an excellent detectivity (4.61 × 1012 Jones). The ZnO honeycomb nanostructure synthesized in this work exhibits a strong trapping effect, providing new insights into the research of nanomaterials used for UV photodetectors.

Improved responsivity performance of ZnO film ultraviolet photodetectors by vertical arrays ZnO nanowires with light trapping effect.

The light trapping effect of zinc oxide (ZnO) ultraviolet photodetectors (UV PDs) has been established as a promising way to optimize the performance of optoelectronic devices. In this paper, we report a light trapping fabricated metal-semiconductor-metal structure, consisting of a ZnO nanowire array as a top layer light absorber supported by a ZnO film. The ZnO film is bridged between two interdigitated metal electrodes for collecting photo-generated carriers. In this connection, high-dense ZnO nanowires can be used as a light trapping unit and to transmit the photogenerated carriers towards the ZnO film. The photogenerated carriers diffuse along the longitudinal direction of the ZnO nanowire and then to the ZnO film and are collected by the applied bias electrode. Compared to present ZnO thin film UV PDs, our device has an effective light trapping effect and the enhancement of photo-generated carriers at the top interface by a ZnO nanowire array structure are highly beneficial to UV light detection as they can provide a long optical path and more surface area. In addition, when the device was connected with nanowires, a 10 times augment of responsivity appeared accompanied by a giant photo-to-dark current ratio (1.6 × 103). This novel work not only enhanced fundamental improvement of nanowires to ZnO film UV PDs, but also provided a distinct contrast between light trapping UV PDs and ZnO film UV PDs.