Frequency selective surface filters with high-quality factors based on a Fano resonance.

In this work, we propose a design method of the narrow passband filter with a high Q-factor based on a Fano resonance. A single-layer metallic frequency selective surface (FSS) with a simple structure is first designed according to this idea, but the result is not satisfying since the filter transmittance will significantly decrease with the increase of the Q-factor due to the presence of an inherent ohmic damping. Further, to improve the design, a ceramic-based FSS filter based on the similar mechanism is proposed, and the requirements of the ultrahigh Q-factors can be met owing to the high permittivity and low loss tangent of microwave ceramics. The design strategy proposed in this paper may have a promising potential in modern wireless communication and related fields.

Bandpass Filter Integrated Metalens Based on Electromagnetically Induced Transparency.

A bandpass filter integrated metalens based on electromagnetically induced transparency (EIT) for long-wavelength infrared (LWIR) imaging is designed in this paper. The bandwidth of the metalens, which is a diffractive optical element, decreases significantly with the increase of the aperture size to a fixed f-number, which leads to the decline of imaging performance. The same material composition and preparation process of the metalens and the EIT metasurface in the long-wavelength infrared make it feasible that the abilities of focusing imaging and filtering are integrated into a metasurface device. With the purpose of validating the feasibility of this design method, we have designed a 300-µm-diameter integrated metalens whose f-number is 0.8 and the simulation was carried out. The introduction of EIT metasurface does not affect the focusing near the diffraction limit at the target wavelength, and greatly reduces the influence of stray light caused by non-target wavelength incident light. This bandpass filter integrated metalens design method may have a great potential in the field of LWIR compact optical systems.

Design of the all-silicon long-wavelength infrared achromatic metalens based on deep silicon etching.

An all-silicon long-wavelength infrared (LWIR) achromatic metalens based on deep silicon etching is designed in this paper. With a fixed aperture size, the value range of the equivalent optical thickness of the non-dispersive meta-atoms constructing the achromatic metalens determines the minimum f-number. The fabrication characteristic with high aspect ratio of deep silicon etching amplifies the difference value of optical thickness between different meta-atoms by increasing the propagation distance of the propagation mode, which ensures a small f-number to obtain a better imaging resolution. A 280-µm-diameter silicon achromatic metalens with a f-number of 1 and the average focusing efficiency of 27.66% has been designed and simulated to validate the feasibility of this strategy. The simulation results show that the maximum focal length deviation percentage from the target value between the wavelength of 8.6 and 11.4 µm is 1.61%. This achromatic metalens design is expected to play a role in the field of LWIR integrated optical system.

Broadband Achromatic Metasurfaces for Longwave Infrared Applications.

Longwave infrared (LWIR) optics are essential for several technologies, such as thermal imaging and wireless communication, but their development is hindered by their bulk and high fabrication costs. Metasurfaces have recently emerged as powerful platforms for LWIR integrated optics; however, conventional metasurfaces are highly chromatic, which adversely affects their performance in broadband applications. In this work, the chromatic dispersion properties of metasurfaces are analyzed via ray tracing, and a general method for correcting chromatic aberrations of metasurfaces is presented. By combining the dynamic and geometric phases, the desired group delay and phase profiles are imparted to the metasurfaces simultaneously, resulting in good achromatic performance. Two broadband achromatic metasurfaces based on all-germanium platforms are demonstrated in the LWIR: a broadband achromatic metalens with a numerical aperture of 0.32, an average intensity efficiency of 31%, and a Strehl ratio above 0.8 from 9.6 µm to 11.6 µm, and a broadband achromatic metasurface grating with a constant deflection angle of 30° from 9.6 µm to 11.6 µm. Compared with state-of-the-art chromatic-aberration-restricted LWIR metasurfaces, this work represents a substantial advance and brings the field a step closer to practical applications.