Genetic Basis Identification of a NLR Gene, TaRGA5-like, That Confers Partial Powdery Mildew Resistance in Wheat SJ106.

Wheat powdery mildew is an important fungal disease that seriously jeopardizes wheat production, which poses a serious threat to food safety. SJ106 is a high-quality, disease-resistant spring wheat variety; this disease resistance is derived from Wheat-wheatgrass 33. In this study, the powdery mildew resistance genes in SJ106 were located at the end of chromosome 6DS, a new disease resistance locus tentatively named PmSJ106 locus. This interval was composed of a nucleotide-binding leucine-rich repeat (NLR) gene cluster containing 19 NLR genes. Five NLRs were tandem duplicated genes, and one of them (a coiled coil domain-nucleotide binding site-leucine-rich repeat (CC-NBS-LRR; CNL) type gene, TaRGA5-like) expressed 69-836-fold in SJ106 compared with the susceptible control. The genome DNA and cDNA sequences of TaRGA5-like were amplified from SJ106, which contain several nucleotide polymorphisms in LRR regions compared with susceptible individuals and Chinese Spring. Overexpression of TaRGA5-like significantly increased resistance to powdery mildew in susceptible receptor wheat Jinqiang5. However, Virus induced gene silence (VIGS) of TaRGA5-like resulted in only a small decrease of SJ106 in disease resistance, presumably compensated by other NLR duplicated genes. The results suggested that TaRGA5-like confers partial powdery mildew resistance in SJ106. As a member of the PmSJ106 locus, TaRGA5-like functioned together with other NLR duplicated genes to improve wheat resistance to powdery mildew. Wheat variety SJ106 would become a novel and potentially valuable germplasm for powdery mildew resistance.

Genome-wide identification of TaCIPK gene family members in wheat and their roles in host response to Blumeria graminis f. sp. tritici infection.

Powdery mildew, caused by Blumeria graminis f. sp. tritici (Bgt), is a destructive disease affecting wheat crops worldwide. Functional genes can be activated in response to Bgt inoculations. Calcineurin B-like protein (CBL) together with CBL-interacting protein kinase (CIPK) forms the CBL-CIPK protein complex that participates in Ca2+ sensor kinase-related signaling pathways responding to abiotic and biotic stresses. In this study, we performed a genome-wide screening and identified 27 CIPK subfamilies (123 CIPK transcripts, TaCIPKs) including 55 new and 47 updated TaCIPKs in wheat. Phylogenetic analysis revealed that 123 TaCIPKs could be divided into four groups. Segmental duplications and tandem repeats promoted the expansion of the TaCIPK family. Gene function was further evidenced by differences in gene structure, cis-elements, and protein domains. TaCIPK15-4A was cloned in this study. TaCIPK15-4A contained 17 serine, seven tyrosine, and 15 threonine phosphorylation sites and localized in the plasma membrane and cytoplasm. TaCIPK15-4A expression was induced after Bgt inoculation. Virus-induced gene silencing and overexpression experiments indicated that TaCIPK15-4A could play a positive role in wheat disease resistance to Bgt. Overall, these results provide insights into the role of the TaCIPK gene family in wheat resistance and could be beneficial for further research to prevent Bgt infection.

Long-term enclosure at heavy grazing grassland affects soil nitrification via ammonia-oxidizing bacteria in Inner Mongolia.

Enclosure and grazing can significantly change the turnover of nitrogen in grassland soil. Changes of soil nitrogen mineralization and ammonium-oxidizing microorganisms caused by enclosure in different grazing intensities (about 30 years of grazing history) grassland, however, has rarely been reported. We selected the grassland sites with high and medium grazing intensity (HG and MG, 4 and 2 sheep ha-1, respectively) and had them enclosed (45 × 55 m) in 2005 while outside the enclosure was continuously grazed year-round. A two factorial study was designed: grazing intensity (MG and HG sites) and enclosure (fence and non-fence). Nitrogen mineralization was detected through a laboratory incubation experiment. The abundance and community structure of soil ammonia-oxidizing archaea (AOA) and ammonia-oxidizing bacteria (AOB) were analyzed using quantitative PCR (q-PCR), terminal-restriction fragment length polymorphism (T-RFLP), cloning, and sequencing. Results showed that compared with MG site, at HG site the AOB abundance and community structure of AOB changed significantly while the AOA abundance and community structure did not change obviously. Enclosure significantly decreased the cumulative mineralized N, N mineralization rate, the abundance of AOB and the AOB community structure at the HG site, while at MG site, enclosure did not change these parameters. Potential nitrification rate (PNR) was positively correlated with the abundance of AOA and AOB at the MG and HG sites, respectively. The abundance of AOA was significantly correlated with soil pH; however, AOB abundance was significantly correlated with soil available N, total N, C/N ratio, pH, etc. The phylogenetic analysis showed that Nitrososphaeraceae and Nitrosomonadaceae were the dominant AOA and AOB, respectively. Totally, the responses of AOB and AOA mainly were associated to changes in soil physicochemical properties caused by different intensity grazing; AOB and AOA may be the dominant functional players in ammonia oxidation processes at HG and MG site, respectively.

Adsorption of phenanthrene and 1-naphthol to graphene oxide and L-ascorbic-acid-reduced graphene oxide: effects of pH and surfactants.

In this study, reduced graphene oxide (RGO) was synthesized by L-ascorbic acid reduction, which was a relatively mild and environmental friendly reduction method, and the adsorption of organic contaminants was compared to graphene oxide (GO) to probe the potential adsorption mechanisms. The morphology properties of GO and RGO were characterized by X-ray photoelectron spectroscopy (XPS), Fourier transform infrared transmission (FTIR), Raman spectrometer, transmission electron microscope (TEM), and scanning electron microscopy (SEM). The adsorption affinities of GO and RGO for phenanthrene and 1-naphthol were studied in batch experiments. The effects of pH and surfactants were also assessed. The results demonstrated that RGO reduced by L-ascorbic acid show significantly greater adsorption affinity for both phenanthrene and 1-naphthol than GO, and even greater than most of RGOs that reduced by the strong reductive reagents. This was mainly attributed to the hydrophobic interaction, π-π interaction, and H-bonding between graphene sheets and organic contaminants. Both GO and RGO showed stronger adsorption to phenanthrene than to 1-naphthol. The adsorption of 1-naphthol increased with decreasing pH and reached a maximum around pH = 7.34. The surfactants, sodium dodecyl benzene sulfaonate (SDBS) and cetyltrimethyl ammonium bromide (CTAB), had negligible influence on adsorption to GO. Note that CTAB significantly inhibited the adsorption of phenanthrene/1-naphthol on RGO, which could be attributed to the pore blockage effect. In addition, RGO could be regenerated and reused with high recyclability over five cycles. The present study suggests that RGO obtained via L-ascorbic acid reduction can be deemed as a promising material for organic contaminated wastewater treatment.

Microwave assisted synthesis of metal-organic framework MIL-101 nanocrystals as sorbent and pseudostationary phase in capillary electrophoresis for the separation of anthraquinones in environmental water samples.

In this work, a CE method was developed to separate five anthraquinones: aloe-emodin, rhein, emodin, chrysophanol, and physcion. The CE method used a nano-sized metal organic framework MIL-101 (nMIL-101) as pseudostationary phase (PSP) and sorbent for dispersed particle extraction (DPE). The nMIL-101 was synthesized by microwave technique and was characterized by UV-vis, TEM, Zeta potential, X-ray diffraction spectrometry and micropore physisorption. In this method, anthraquinones were adsorbed by nMIL-101 of a fast kinetics within 10 min and then separated by CE. The CE conditions were optimized considering time, pH, buffer ionic strength, and nanoparticles concentration. The optimal CE condition is using 20 mM sodium borate buffer (pH 9.1) containing 15% methanol (v/v) and 400 mg/L nMIL-101 as additives within 8 min. The LODs varied from 24 to 57 µg/L, which were lower than those previously reported. Our method has been successfully applied to determine trace anthraquinones in environmental water samples.

Ulnar impaction syndrome with different operative methods: a comparative biomechanical study.

OBJECTIVE: Ulnar impaction syndrome seriously impairs wrist and hand function. Three main treatment procedures are available; however, little systematic research on the post-operation changes in wrist biomechanics currently exists. This study aimed to determine the long-term effects of these procedures and the optimal treatment methods for ulnar impaction syndrome. METHODS: Twenty-four cases of fresh upper limb specimens were randomized into four groups: (1) the control group, (2) the ulnar-shortening operation group, (3) the Sauvé-Kapandji procedure group (distal radioulnar arthrodesis and intentional distal ulnar pseudoarthrosis), and (4) the Darrach procedure group (distal ulna resection). After keeping the wrist in a neutral position, a pressure sensitive film was applied. Starting at 0 N, the load was increased gradually at a speed of 0.1 N/s until reaching 200 N and then maintained for 60 s by the CSS-44020 series biomechanical machine. Then, the pressure sensitive films from each group were measured, and the results were analyzed with SPSS software. RESULTS: The mean pressure and force on the ulna in the groups followed a decreasing trend from the control group, Sauvé-Kapandji procedure group and ulnar-shortening operation group. The mean pressure of the scaphoid fossa and the force on distal aspect of the radius in the groups followed an increasing trend from the control group, Sauvé-Kapandji procedure group, ulnar-shortening operation group and Darrach procedure group. This study found no significant differences in the mean pressure of the scaphoid fossa and the force on distal aspect of the radius between the Sauvé-Kapandji procedure group and the ulnar-shortening operation group. The Sauvé-Kapandji procedure group showed the greatest mean pressure on lunate fossa. CONCLUSIONS: In this comprehensive analysis of wrist biomechanics, the ulnar-shortening operation was superior to the Sauvé-Kapandji procedure and Darrach procedure, which adequately maintained the anatomical relationships of the wrist.