Compact Bandwidth Enhanced Cavity-Backed Magneto-Electric Dipole Antenna with Outer Γ-Shaped Probe for GNSS Bands.

In this paper, a wideband small cavity-backed magneto-electric (ME) antenna is proposed. This antenna is linearly polarized and designed to cover all the Global Navigation Satellite System (GNSS) bands. It exhibits small external dimensions of 90 × 90 × 40 mm3 (0.34 × 0.34 × 0.15 λ3 at lowest frequency) and achieves a wide impedance bandwidth of 40.5% (from 1.14 to 1.72 GHz) due to the excitation of a third resonance of the ME structure. It also provides a regular broadside gain of 5.2 dBi and stable radiation pattern in both E and H planes of the antenna.

Long Carbon Fibers for Microwave Absorption: Effect of Fiber Length on Absorption Frequency Band.

This work presents lightweight epoxy foams loaded with very low weight percentages (≤0.5 wt.%) of carbon fibers (CFs) with different lengths (3 mm, 6 mm, and 12 mm) as broadband microwave absorbing materials for anechoic chamber application. The effect of CF length on microwave absorption, especially on the absorption frequency band, is investigated for frequencies between 1 and 15 GHz. For the elaboration of composites, three different methods-spatula, shear mixing, and ultrasounds-are used for the dispersion of CFs. The observation of these CFs, after the dispersion step, shows a high fiber breakage rate when shear mixing is used, unlike when spatula or ultrasounds methods are used. On the other hand, the characterization of the elaborated composites highlights a correlation between the mixing methods, hence the fiber brakeage, and the measured reflection coefficient (reflection loss) of the composites. As a result, the minimum value of the reflection coefficient is shifted toward the high frequencies when the fiber breakage is observed, suggesting that short CFs absorb at high frequencies while long CFs absorb at low frequencies. Dielectric properties, extracted from the measurement in free space, of composites elaborated with different fiber lengths (3 mm, 6 mm, and 12 mm) confirm that short CFs (3 mm) show maximum losses at high frequencies (around 15 GHz) while long CFs (12 mm) show maximum dielectric losses at low frequencies (below 4 GHz). However, no significant variation is observed on the real part of the relative permittivity, as a function of fiber length, for these porous composites loaded with very low CF rates. A hybrid composite, with a mix of different CF lengths, is prepared and characterized. The simulation of the absorption performance of a pyramidal absorber, based on this hybrid composite, is compared to the one of pyramidal absorber based on composites loaded with a single length of carbon fibers. The pyramidal absorber-based hybrid composite predicts the best absorption performance, especially at the low frequency band. The simulated reflection coefficient of this absorber is less than -12 dB in all the studied frequency range, and less than -40 dB for frequencies higher than 3 GHz. This result confirms the interest of using a mix of carbon fiber lengths to achieve a broadband microwave absorber.

Toward an Ultra-Wideband Hybrid Metamaterial Based Microwave Absorber.

In this paper, we propose a novel design of an ultra-wideband hybrid microwave absorber operating in the frequency range between 2 GHz and 18 GHz. This proposed hybrid absorber is composed of two different layers that integrate a multiband metamaterial absorber and a lossy dielectric layer. The metamaterial absorber consists of a periodic pattern that is composed of an arrangement of different scales of coupled resonators and a metallic ground plane, and the dielectric layer is made of epoxy foam composite loaded with low weight percentage (0.075 wt.%) of 12 mm length carbon fibers. The numerical results show a largely expanded absorption bandwidth that ranges from 2.6 GHz to 18 GHz with incident angles between 0° and 45° and for both transverse electric and transverse magnetic waves. The measurements confirm that absorption of this hybrid based metamaterial absorber exceeds 90% within the above-mentioned frequency range and it may reach an absorption rate of 99% for certain frequency ranges. The proposed idea offers a further step in developing new electromagnetic absorbers, which will impact a broad range of applications.

An UWB Physical Optics Approach for Fresnel-Zone RCS Measurements on a Complex Target at Non-Normal Incidence.

In this paper, we propose a fast method for measuring the radar cross section of a complex target at non-normal incidences and Fresnel region antenna-to-target distances. The proposed method relies both on the physical optics approach and on averaging the field distribution over the transmitting and receiving antenna apertures. The ratio between the analytical expression of the radar cross section at far-field and Fresnel region results in a field-zone extrapolation factor. The RCS resulting from the scattering parameters measured at Fresnel region distances is then corrected with that field-zone extrapolation factor. The method is suitable to be used in a perturbed, multipath environment by applying the distance averaging technique, coupling subtraction or time gating. Our technique requires a very simple measuring configuration consisting of two horn antennas and a vector network analyzer. The experimental validation of the proposed technique demonstrates reasonable agreement with simulated radar cross section at non-normal incidence.