Microsatellite marker-assisted backcross breeding for improvement of wheat salt tolerance using Kharchia 65.

BACKGROUND: Salinity is a significant abiotic stress that affects plants from germination through all growth stages. This study was aimed to determine the morpho-physiological and genetic variations in BC1F2, BC2F1 and F3 generations resulting from the cross combination WH1105 × Kharchia 65. RESULTS: A significant reduction in germination percentage was observed under salt stress in BC1F2 and F3 seeds. Correlation, heritability in the broad sense, phenotypic coefficient of variability (PCV) and genotypic coefficient of variability (GCV) were measured for all traits. The presence of both Nax1 and Nax2 loci was confirmed in twenty-nine plants using the marker-assisted selection technique. Genetic relationships among the populations were assessed using twenty-four polymorphic SSR markers. CONCLUSION: Cluster analysis along with two and three-dimensional PCA scaling (Principal Component Analysis) revealed the distinct nature of WH 1105 and Kharchia 65. Six plants closer to the recurrent parent (WH1105) selected through this study can serve as valuable genetic material for salt-tolerant wheat improvement programs.

Insight Study of Trace Elements in PM2.5 During Nine Years in Delhi, India: Seasonal Variation, Source Apportionment, and Health Risks Assessment.

This study investigated the concentrations, seasonal variations, sources, and human health risks associated with exposure to heavy elements (As, Al, Pb, Cr, Mn, Cu, Zn, and Ni) of PM2.5 at an urban location of Delhi (28° 38' N, 77° 10' E; 218 m amsl), India, from January 2013 to December 2021. The average mass concentration of PM2.5 throughout the study period was estimated as 127 ± 77 µg m-3, which is exceeding the National Ambient Air Quality Standards (NAAQS) limit (annual: 40 µg m-3; 24 h: 60 µg m-3). The seasonal mass concentrations of PM2.5 exhibited at the order of post-monsoon (192 ± 110 µgm-3) > winter (158 ± 70 µgm-3) > summer (92 ± 44 µgm-3) and > monsoon (67 ± 32 µgm-3). The heavy elements, Al (1.19 µg m-3), Zn (0.49 µg m-3), Pb (0.43 µg m-3), Cr (0.21 µg m-3), Cu (0.21 µg m-3), Mn (0.07 µg m-3), and Ni (0.14 µg m-3) exhibited varying concentrations in PM2.5, with the highest levels observed in the post-monsoon season, followed by winter, summer, and monsoon seasons. Six primary sources throughout the study period, contributing to PM2.5 were identified by positive matrix factorization (PMF), such as dust (paved/crustal/soil dust: 29.9%), vehicular emissions (17.2%), biomass burning (15.4%), combustion (14%), industrial emissions (14.2%), and Br-rich sources (9.2%). Health risk assessments, including hazard quotient (HQ), hazard index (HI), and carcinogenic risk (CR), were computed based on heavy elements concentrations in PM2.5. Elevated HQ values for Cr and Mn linked with adverse health impacts in both adults and children. High carcinogenic risk values were observed for Cr in both adults and children during the winter and post-monsoon seasons, as well as in adults during the summer and monsoon seasons. The combined HI value exceeding one suggests appreciable non-carcinogenic risks associated with the examined elements. The findings of this study provide valuable insights into the behaviour and risk mitigation of heavy elements in PM2.5, contributing to the understanding of air quality and public health in the urban environment of Delhi.

Effects of sulfur nanoparticles on rhizosphere microbial community changes in oilseed rape plantation soil under mercury stress.

In the present study, experiments were conducted to assess the influence of nanoscale sulfur in the microbial community structure of metallophytes in Hg-contaminated rhizosphere soil for planting rapeseed. The results showed that the richness and diversity of the rhizobacteria community decreased significantly under Hg stress, but increased slightly after SNPs addition, with a reduction in the loss of Hg-sensitive microorganisms. Moreover, all changes in the relative abundances of the top ten phyla influenced by Hg treatment were reverted when subjected to Hg + SNPs treatment, except for Myxococcota and Bacteroidota. Similarly, the top five genera, whose relative abundance decreased the most under Hg alone compared to CK, increased by 19.05%-54.66% under Hg + SNPs treatment compared with Hg alone. Furthermore, the relative abundance of Sphingomonas, as one of the dominant genera for both CK and Hg + SNPs treatment, was actively correlated with plant growth. Rhizobacteria, like Pedobacter and Massilia, were significantly decreased under Hg + SNPs and were positively linked to Hg accumulation in plants. This study suggested that SNPs could create a healthier soil microecological environment by reversing the effect of Hg on the relative abundance of microorganisms, thereby assisting microorganisms to remediate heavy metal-contaminated soil and reduce the stress of heavy metals on plants.

In this manuscript, we first comprehensively investigated the changes in the rhizosphere microbial community structure of metallophytes in Hg-contaminated soil with SNPs addition, as well as the relationship between soil microbiology and plant resistance to Hg stress. Our results demonstrated that SNPs exhibit a significant advantage in improving rhizosphere microecology by increasing the abundance of beneficial rhizobacteria, thereby alleviating heavy metal toxicity, and promoting plant growth. This study is the first study describing the response of soil microorganisms coexposed to heavy metals and SNPs, providing valuable information for the potential use of SNPs to assist phytoremediation of toxic metal pollution and its impact on soil microbial communities.

Time-Dependent and Coating Modulation of Tomato Response upon Sulfur Nanoparticle Internalization and Assimilation: An Orthogonal Mechanistic Investigation.

Nanoenabled strategies have recently attracted attention as a sustainable platform for agricultural applications. Here, we present a mechanistic understanding of nanobiointeraction through an orthogonal investigation. Pristine (nS) and stearic acid surface-modified (cS) sulfur nanoparticles (NPs) as a multifunctional nanofertilizer were applied to tomato (Solanum lycopersicumL.) through soil. Both nS and cS increased root mass by 73% and 81% and increased shoot weight by 35% and 50%, respectively, compared to the untreated controls. Bulk sulfur (bS) and ionic sulfate (iS) had no such stimulatory effect. Notably, surface modification of S NPs had a positive impact, as cS yielded 38% and 51% greater shoot weight compared to nS at 100 and 200 mg/L, respectively. Moreover, nS and cS significantly improved leaf photosynthesis by promoting the linear electron flow, quantum yield of photosystem II, and relative chlorophyll content. The time-dependent gene expression related to two S bioassimilation and signaling pathways showed a specific role of NP surface physicochemical properties. Additionally, a time-dependent Global Test and machine learning strategy applied to understand the NP surface modification domain metabolomic profiling showed that cS increased the contents of IA, tryptophan, tomatidine, and scopoletin in plant leaves compared to the other treatments. These findings provide critical mechanistic insights into the use of nanoscale sulfur as a multifunctional soil amendment to enhance plant performance as part of nanoenabled agriculture.

Ionic Covalent Organic Framework as a Dual Functional Sensor for Temperature and Humidity.

Visual sensing of humidity and temperature by solids plays an important role in the everyday life and in industrial processes. Due to their hydrophobic nature, most covalent organic framework (COF) sensors often exhibit poor optical response when exposed to moisture. To overcome this challenge, the optical response is set out to improve, to moisture by incorporating H-bonding ionic functionalities into the COF network. A highly sensitive COF, consisting of guanidinium and diformylpyridine linkers (TG-DFP), capable of detecting changes in temperature and moisture content is fabricated. The hydrophilic nature of the framework enables enhanced water uptake, allowing the trapped water molecules to form a large number of hydrogen bonds. Despite the presence of non-emissive building blocks, the H-bonds restrict internal bond rotation within the COF, leading to reversible fluorescence and solid-state optical hydrochromism in response to relative humidity and temperature.

Identification of sources of coarse mode aerosol particles (PM10) using ATR-FTIR and SEM-EDX spectroscopy over the Himalayan Region of India.

This study attempts to examine the morphological, elemental and physical characteristics of PM10 over the Indian Himalayan Region (IHR) using FTIR and scanning electron microscopy-energy dispersive X-ray (SEM-EDX) analysis. The study aimed at source identification of PM10 by exploring the inorganic ions, organic functional groups, morphology and elemental characteristics. The pollution load of PM10 was estimated as 63 ± 22 µg m-3; 53 ± 16 µg m-3; 67 ± 26 µg m-3 and 55 ± 11 µg m-3 over Mohal-Kullu, Almora, Nainital and Darjeeling, respectively. ATR-FTIR spectrum analysis revealed the existence of inorganic ions (SiO44-, TiO2, SO42-, SO3-, NO3-, NO2-, CO32-, HCO3-, NH4+) and organic functional groups (C-C, C-H, C=C, C≡C, C=O, N-H, C≡N, C=N, O-H, cyclic rings, aromatic compounds and some heterogeneous groups) in PM10 which may arise from geogenic, biogenic and anthropogenic sources. The morphological and elemental characterization was performed by SEM-EDX, inferring for geogenic origin (Al, Na, K, Ca, Mg and Fe) due to the presence of different morphologies (irregular, spherical, cluster, sheet-like solid deposition and columnar). In contrast, particles having biogenic and anthropogenic origins (K, S and Ba) have primarily spherical with few irregular particles at all the study sites. Also, the statistical analysis ANOVA depicts that among all the detected elements, Na, Al, Si, S and K are site-specific in nature as their mean of aw% significantly varied for all the sites. The trajectory analysis revealed that the Uttarakhand, Jammu and Kashmir, the Thar Desert, Himachal Pradesh, Pakistan, Afghanistan, Nepal, Sikkim, the Indo-Gangetic Plain (IGP) and the Bay of Bengal (BoB) contribute to the increased loading of atmospheric pollutants in various locations within the IHR.

Chemical characteristics, morphology and source apportionment of PM10 over National Capital Region (NCR) of India.

The present study frames the physico-chemical characteristics and the source apportionment of PM10 over National Capital Region (NCR) of India using the receptor model's Positive Matrix Factorization (PMF) and Principal Momponent Mnalysis/Absolute Principal Component Score-Multilinear Regression (PCA/APCS-MLR). The annual average mass concentration of PM10 over the urban site of Faridabad, IGDTUW-Delhi and CSIR-NPL of NCR-Delhi were observed to be 195 ± 121, 275 ± 141 and 209 ± 81 µg m-3, respectively. Carbonaceous species (organic carbon (OC), elemental carbon (EC) and water-soluble organic carbon (WSOC)), elemental constituents (Al, Ti, Na, Mg, Cr, Mn, Fe, Cu, Zn, Br, Ba, Mo Pb) and water-soluble ionic components (F-, Cl-, SO42-, NO3-, NH4+, Na+, K+, Mg2+, Ca2+) of PM10 were entrenched to the receptor models to comprehend the possible sources of PM10. The PMF assorted sources over Faridabad were soil dust (SD 15%), industrial emission (IE 14%), vehicular emission (VE 19%), secondary aerosol (SA 23%) and sodium magnesium salt (SMS 17%). For IGDTUW-Delhi, the sources were SD (16%), VE (19%), SMS (18%), IE (11%), SA (27%) and VE + IE (9%). Emission sources like SD (24%), IE (8%), SMS (20%), VE + IE (12%), VE (15%) and SA + BB (21%) were extracted over CSIR-NPL, New Delhi, which are quite obvious towards the sites. PCA/APCS-MLR quantified the similar sources with varied percentage contribution. Additionally, catalogue the Conditional Bivariate Probability Function (CBPF) for directionality of the local source regions and morphology as spherical, flocculent and irregular were imaged using a Field Emission-Scanning Electron Microscope (FE-SEM).

Influence of nanoscale sulfur on mercury accumulation and plant growth in oilseed rape seedlings (Brassica napus L.) grown on mercury-contaminated soil.

Mercury (Hg) pollution has seriously threatened the crop productivity and food security. In the present research, experiments were conducted to assess the influence of nanoscale sulfur/sulfur nanoparticles and the corresponding bulk and ionic sulfur forms on the growth and Hg accumulation of oilseed rape seedlings grown on Hg-contaminated soil, as well as the transformation of soil Hg fractions. The results showed a significant reduction in fresh biomass for seedlings grown on 80-200 mg/kg Hg-polluted soil after 30 days. At 120 mg/kg Hg treatment, 100-300 mg/kg sulfur nanoparticles (SNPs) application counteracted Hg toxicity more effectively compared to the corresponding bulk sulfur particles (BSPs) and ionic sulfur (sulfate) treatments. The seedlings treated with 120 mg/kg Hg + 300 mg/kg SNPs gained 54.2 and 56.9% more shoot and root biomass, respectively, compared to those treated with Hg alone. Meanwhile, 300 mg/kg SNPs application decreased Hg accumulation by 18.9 and 76.5% in shoots and roots, respectively, relative to Hg alone treatment.SNPs treatment caused more Hg to be blocked in the soil and accumulating significantly less Hg in plants as compared to other S forms. The chemical fractions of Hg in the soil were subsequently investigated, and the solubility of Hg was significantly decreased by applying SNPs to the soil. Especially 200-300 mg/kg SNPs treatments caused the ratio of the soluble/exchangeable and the specifically absorbed fraction to be the lowest, accounting for 1.95-4.13% of the total Hg of soil. These findings suggest that adding SNPs to Hg-contaminated soils could be an effective measure for immobilizing soluble Hg and decreasing the Hg concentration in the edible parts of crops. The results of the current study hold promise for the practical application of SNPs to Hg-contaminated farmland for better yields and simultaneously increasing the food safety.

The novelty of this study is the selection of oilseed rape and nanoscale sulfur (NS) or sulfur nanoparticles (SNPs) as nontoxic nanomaterial to counteract the Hg toxicity and accumulation. Oilseed rape was selected due to its wide adaptability to various environmental conditions and the high-value oil for human consumption and biofuels production. These advantages make oilseed rape a highly valuable crop for various applications. NS was selected due to its reported ability to limit the uptake of heavy metals in oilseed rape, rice, and wheat along with other crops and subsequently restrict the toxicity of heavy metals in these plants and improve food safety. In this study, we evaluated the growth, Hg accumulation, and the resulting toxicity in oilseed rape grown on Hg-contaminated soil, with or without amendments with NS. The outcomes from this study provided evidence of the significant potential of NS in preventing Hg bioaccumulation and improving crop yields in oilseed rape. This provides opportunity to use NS as an ideal non-GMO approach to limit toxic metals in crops.

Emission inventory of inorganic trace gases from solid residential fuels over the National Capital Territory of India.

In developing nations, solid residential fuels are the major sources of primary energy for various domestic activities. To date, the emission inventory of inorganic trace gases over National Capital Territory (NCT) was prepared using either default or country-specific emission factors. In this paper, we report (for the first time) the spatial variation of emission factors (EFs) of inorganic trace gases (SO2, NO, NO2, CO, CO2, and CH4) from the residential fuels used in slums and rural areas of NCT determined using dilution chamber in the laboratory. 147 residential fuel samples, including fuelwood, dung cake, crop residues, coal, etc., were collected at 149 NCT locations out of 675 slum clusters and 146 rural villages. The range of EF(s) of SO2 (0.02 ± 0.01 to 0.04 ± 0.01 g kg-1), CH4 (0.10 to 0.34 g kg-1), NO2 (0.01 to 0.02 g kg-1) is lower than the CO (3.55 ± 1.72 to 6.07 ± 1.53 g kg-1) and CO2 (0 to 129.45 ± 46.94 g kg-1). The north and north west districts of NCT are emission hotspots for CH4, NO, and NO2 emissions, whereas, the southern and northern areas of NCT are for CO2. These citywide emission inventories (0.05° × 0.05°) of inorganic trace gases are prepared using laboratory-determined EFs and available consumption data determined by recent survey information. Among solid residential fuels, fuel wood, and dung cake are two major contributors to inorganic trace gases in NCT.

Size-distribution and driving factors of aerosol oxidative potential in rural kitchen microenvironments of northeastern India.

This study reports size-resolved dithiothreitol (DTT)-based oxidative potential (OP: total and water-soluble) in rural kitchens using liquefied petroleum gas (LPG), firewood (FW), and mixed biomass (MB) fuels in northeastern (NE) India. In comparison to LPG, volume-normalized total OP (OPtotal(v)DTT) was enhanced by a factor of ∼5 in biomass-using kitchens (74 ± 35 to 78 ± 42 nmol min-1 m-3); however, mass-normalized total OP (OPtotal(m)DTT) was similar between LPG and FW users and higher by a factor of 2 in MB-using kitchens. The water-insoluble OP (OPwi(v, m)DTT) fraction in OPtotal(v, m)DTT was greater than 50% across kitchens. Size distributions across kitchens and OPDTT categories ranged from unimodal to trimodal. OPws(v)DTT was driven by metals as well as organics across size fractions while OPwi(v)DTT was majorly constrained by metals with an increasing importance of organics in fine particles of biomass-using kitchens. Multiple linear regression analysis revealed that Cu and Ba explained 71% of the OPtotal(v)DTT variability in LPG-using kitchens, while water-soluble organic carbon (WSOC) and Ba were responsible for 44% variability in FW-using kitchens. Finally, the high internal dose of OPtotal(v)DTT (28-31 nmol min-1 m-3) in biomass-using kitchens established the severity of oxidative stress on the exposed population.

Effect of Pranayama as Adjuvant to Medical Treatment on Severity, Frequency, and Duration of Headache in Migraine Patients: An Open-Label Randomized Controlled Trial.

Background: Migraine is the second leading cause of disability worldwide with high rates of dissatisfaction for allopathic treatment among patients. Pranayama is an easy, convenient, and cost-effective method that can supplement existing standard medical treatment of migraine. Objective: To study the effect of pranayama as an adjuvant to standard medical treatment of migraine on clinical outcome variables of migraine. Materials and Methods: This was a randomized controlled trial conducted on 80 consecutive migraine patients who were diagnosed as per International Classification of Headache Disorders-3 (ICHD-3) criteria and were randomly allocated into two groups, that is, standard medical treatment (SMT) group and standard medical treatment plus pranayama (SMT + P) group. The effect of pranayama on clinical outcome variables of migraine was evaluated by using standardized questionnaires. The data was statistically analyzed using SPSS Statistics 20 software. A P value of ≤0.05 was considered statistically significant. Results: Intragroup analysis showed all clinical outcome variables of migraine reduced significantly in the SMT + P group whereas all clinical outcome variables of migraine except the duration of headache episodes reduced significantly in the SMT group. Although statistically non-significant, intergroup analysis demonstrates that reduction in headache severity, duration of headache episodes, and headache impact test-6 (HIT-6) score was more in the SMT + P group whereas reduction in headache frequency and migraine disability assessment (MIDAS) score was more in the SMT group. Conclusion: Pranayama supplements the standard medical treatment of migraine by reducing the duration of headache episodes in addition to the reduction in headache severity, headache frequency, HIT-6 scores, and MIDAS scores.

Health risk assessment of aerosol particles (PM2.5 and PM10) during winter crop at the agricultural site of Delhi, India.

For the last few decades, air pollution in developing country like India is increasing, and it is a matter of huge concern due to its associated human health impacts. In this region, the burgeoning population, escalating urbanization and industrialization, has been cited as the major reason for such a high air pollution. The present study was carried out for health risk assessment of aerosol particles (PM10 and PM2.5) and its associated heavy metals of an agriculture farm site at Indian Agricultural Research Institute (IARI) considered to be green urban area in Delhi, India. The concentrations of both PM10 and PM2.5 varied significantly from 136 to 177 µg/m3 and 56 to 162 µg/m3, respectively at the site. In the present case, the highest PM10 and PM2.5 levels were reported in January, followed by December. The levels of ambient PM10 and PM2.5 are influenced by wind prevailing meteorology. These levels of PM10 and PM2.5 are more than the permissible limits of WHO guidelines of 15 and 5 µg/m3, respectively, thereby leading to high aerosol loadings specifically in winters. The PM concentration of the atmosphere was found to be negatively correlated with temperature during the sampling period. The concentrations of surface ozone O3 and NOx in the present study were observed to be high in February and March, respectively. The increasing air pollution in the city of Delhi poses a great risk to the human health, as the particulate matter loaded with heavy metals can enter humans via different pathways, viz., ingestion, inhalation, and absorption through skin. The mean hazard index for metals (Zn, Pb, Cd, As, Cr, and Ni) was observed within the acceptable limit (HI < 1), thereby indicating negligible non-carcinogenic effects to residing population. The carcinogenic risk assessment was conducted for Cd, Pb, and As only, as the concentrations for other metals were found to be quite low. The carcinogenic risk values were also within the limits of USEPA standards, indicating no carcinogenic risks to the health of children and adults residing near the site. This information about the PM pollution at the agricultural site and health risk assessment will serve as a baseline data in assessment of human health impacts due to air pollution at the local scale and can be used for development of mitigation strategies for tackling air pollution.

Healthcare professionals' perspectives of the provision of, and challenges for, eating, drinking and psychological support post stroke: findings from semistructured interviews across India.

AIM: This qualitative study explores with health professionals the provision of, and challenges for, postdischarge stroke care, focussing on eating, drinking and psychological support across India. DESIGN: Qualitative semistructured interviews. SETTING: Seven geographically diverse hospitals taking part in a Global Health Research Programme on Improving Stroke Care in India. PARTICIPANTS: A purposive sample of healthcare professionals with current experience of working with patients who had a stroke. RESULTS: Interviews with 66 healthcare professionals (23 nurses (14 staff nurses; 7 senior nurse officers; 1 intensive care unit nurse; 1 palliative care nurse)); 16 doctors (10 neurologists; 6 physicians); 10 physiotherapists; 5 speech and language therapists; 4 occupational therapists; 4 dieticians; 2 psychiatrists; and 2 social workers resulted in three main themes: integrated inpatient discharge care planning processes; postdischarge patient and caregiver role and challenges; patient and caregiver engagement post discharge. CONCLUSIONS: Discharge planning was integrated and customised, although resources were limited in some sites. Task shifting compensated for a lack of specialists but was limited by staff education and training. Caregivers faced challenges in accessing and providing postdischarge care. Postdischarge care was mainly hospital based, supported by teleservices, especially for rural populations. Further research is needed to understand postdischarge care provision and the needs of stroke survivors and their caregivers.

Nanoscale sulfur alleviates silver nanoparticle toxicity and improves seed and oil yield in Soybean (Glycine max).

Silver nanoparticles (AgNPs) are commonly used in many commercial products due to their antimicrobial properties, and their significant exposure in agricultural systems is anticipated. AgNPs accumulation in soil and subsequent uptake by plants can be harmful to plant growth and exposure to animals and humans through the food chain is a major concern. This study evaluated the potential protective role of nanosulfur (NS) and bulk sulfur (BS) at 200 and 400 mg/kg soil application in alleviating silver nanoparticle (AgNPs; 32 and 64 mg/kg) phytotoxicity to soybean [Glycine max (L) Merr.]. The treatments were added in the soil before soybean transplantation; growth, yield, nutrient, and silver accumulation were measured in the shoot, root, and seeds. Exposure to AgNPs significantly affected plant growth and yield, reducing nodule weight by 40%, fresh shoot weight by 66%, and seed yield by 68% when compared to controls. However, nanosulfur application in soil alleviated AgNPs toxicity, and importantly, this impact was nanoscale specific at the higher concentration because the benefits of corresponding bulk sulfur (BS) treatments were marginal. Specifically, nanosulfur at 400 mg/kg significantly increased seed yield (∼3-fold more than AgNP at 64 mg/kg) and shoot biomass (2.6-fold more than AgNP at 64 mg/kg) upon co-exposure with AgNPs, essentially alleviating AgNPs toxicity. Moreover, NS increased nodule mass by 3.5 times compared to AgNPs-treated plants, which was 170% greater than the Ag- and NS-free controls. Plants treated with NS with AgNPs co-exposure accumulated significantly less Ag in the shoots (∼80% reduction) and roots (∼95% reduction); no Ag contents were detected in seeds. These findings demonstrate the potential of sulfur, especially NS, as a sustainable soil amendment to reduce the accumulation and toxicity of AgNPs and as a valuable nano-enabled strategy to promote food safety and security.

Optical source apportionment of aqueous brown carbon (BrC) on a daytime and nighttime basis in the eastern Indo-Gangetic Plain (IGP) and insights from 13C and 15N isotopic signatures.

This study reports day-night and seasonal variations of aqueous brown carbon (BrCaq) and constituent humic-like substances (HULIS) (neutral and acidic HULIS: HULIS-n and HULIS-a) from the eastern Indo-Gangetic Plain (IGP) of India during 2019-2020. This is followed by the application of the receptor model positive matrix factorization (PMF) for optical source apportionment of BrCaq and the use of stable isotopic ratios (δ13C and δ15N) to understand atmospheric processing. Nighttime BrCaq absorption and mass absorption efficiencies (MAE) were enhanced by 40-150 % and 50-190 %, respectively, compared to the daytime across seasons, possibly as a combined effect from daytime photobleaching, dark-phase secondary formation, and increased nighttime emissions. MAE250 nm/MAE365 nm (i.e., E2/E3) ratios and Angstrom Exponents revealed that BrCaq and HULIS-n were relatively more aromatic and conjugated during the biomass burning-dominated periods while BrCaq and HULIS-a were comprised mostly of non-conjugated aliphatic structures from secondary processes during the photochemistry-dominated summer. The relative radiative forcing of BrCaq with respect to elemental carbon (EC) was 10-12 % in the post-monsoon and winter in the 300-400 nm range. Optical source apportionment using PMF revealed that BrCaq absorption at 300, 365 and 420 nm wavelengths in the eastern IGP is mostly from biomass burning (60-75 %), followed by combined marine and fossil fuel-derived sources (24-31 %), and secondary processes (up to 10 %). Source-specific MAEs at 365 nm were estimated to be the highest for the combined marine and fossil fuel source (1.34 m2 g-1) followed by biomass burning (0.78 m2 g-1) and secondary processing (0.13 m2 g-1). Finally, δ13C and δ15N isotopic analysis confirmed the importance of summertime photochemistry and wintertime NO3--dominated chemistry in constraining BrC characteristics. Overall, the quantitative apportionment of BrCaq sources and processing reported here can be expected to lead to targeted source-specific measurements and a better understanding of BrC climate forcing in the future.

Light-driven self-assembly of spiropyran-functionalized covalent organic framework.

Controlling the number of molecular switches and their relative positioning within porous materials is critical to their functionality and properties. The proximity of many molecular switches to one another can hinder or completely suppress their response. Herein, a synthetic strategy involving mixed linkers is used to control the distribution of spiropyran-functionalized linkers in a covalent organic framework (COF). The COF contains a spiropyran in each pore which exhibits excellent reversible photoswitching behavior to its merocyanine form in the solid state in response to UV/Vis light. The spiro-COF possesses an urchin-shaped morphology and exhibits a morphological transition to 2D nanosheets and vesicles in solution upon UV light irradiation. The merocyanine-equipped COFs are extremely stable and possess a more ordered structure with enhanced photoluminescence. This approach to modulating structural isomerization in the solid state is used to develop inkless printing media, while the photomediated polarity change is used for water harvesting applications.

Role of South Asian outflow on the oxidative potential of marine aerosols over the Indian Ocean.

Oxidative potential (OP) of fine marine aerosols (PM2.5) over the northern Indian Ocean (N_IO) and equatorial Indian Ocean (E_IO) were studied using shipborne measurements conducted as part of the Integrated Campaign for Aerosols, gases and Radiation Budget (ICARB-2018). During the study, an enhanced concentration of PM2.5 was found over N_IO (27.22 ± 14.29 µg.m-3) compared with E_IO (15.91 ± 2.58 µg.m-3), as N_IO experiences continental outflow from anthropogenically dominated South Asian region. However, E_IO received pristine air masses from the middle of the Arabian Sea, implying a reduced concentration. The OP of PM2.5 was evaluated using a dithiothreitol (DTT) assay. The mass (DTTm or intrinsic OP) and volume (DTTv or extrinsic OP) normalized DTT exhibited a significant spatial variation over the Indian Ocean (IO). Intrinsic OP showed ∼2 times higher values over N_IO than E_IO, indicating aging of aerosols during long-range transport impacts OP of marine aerosol. Similarly, increased concentrations of anthropogenic species such as non-sea sulfate (nssSO42-), nitrate (NO3-), ammonium (NH4+), non-sea potassium ion (nssK+), water-soluble transition metals (Fe, Ti, Zn, Cu, Mn, Cr), elemental carbon (EC), organic carbon (OC), water-soluble organic carbon (WSOC), were also observed over N_IO compared with E_IO. Pearson correlation and multiple linear regression (MLR) analysis revealed that combustion sources, chemical processing and co-transportation of anthropogenic species during long-range transport are the main drivers of intrinsic OP in the outflow region.

Insights into seasonal-variability of SVOCs, morpho-elemental and spectral characteristics of PM2.5 collected at a dense industrial site: Faridabad, Haryana, India.

The development-oriented anthropogenic activities have led to intensive increase in emission of various organic pollutants, which contribute considerably to human health risk. In the present study, chemical, physical and spectral characterisation of fine particulate matter (PM2.5), collected at Faridabad city, in northern India, were examined. Seasonal variation of organic compounds [n-alkanes, polyaromatic hydrocarbons (PAHs) and phthalic acid esters (PAEs)], and potential health risk of Polyaromatic hydrocarbons (PAHs) exposure using toxic equivalency potential (TEQ) approach had been assessed. These showed seasonal average values ranging from 156.4 ± 57.0 ng/m3 to 217.6 ± 72.9 ng/m3, 98.0 ± 21.4 ng/m3 to 177.8 ± 72.8 ng/m3, and 30.9 ± 11.9 ng/m3 to 82.5 ± 29.2 ng/m3, respectively, with the highest value for winter. It is noteworthy that unlike, n-alkanes and PAEs, PAHs were least during spring. The high molecular weight PAHs (BaP, BkF, DahA and IcdP) were found to exhibit higher TEQ values (ranging from 0.7 to 9.7) despite of their lower concentrations. The PAH diagnostic ratio, carbon preference index and total index revealed the enhanced impact of biogenic sources of emissions in comparison to diesel emission sources during winter.

Synthesis of Self-Assembled Single Atomic Layer Gold Crystals-Goldene.

We report, for the first time, a technique to synthesize free-standing, one-atom thick 2D gold crystals (namely, goldene) and self-assembled 2D periodic arrays of goldene. High-resolution transmission electron microscopy (HRTEM) imaging of goldene revealed herringbone and honeycomb lattices, which are primarily gold surface features due to its reconstruction. Imaging of these surface-only features by a nonsurface characterization technique such as HRTEM is an unequivocal proof of the absence of three-dimensionality in goldene. Atomic force microscopy confirmed 1-2 Šthickness of goldene. High-resolution X-ray photoelectron spectroscopy (HR-XPS), selective area electron diffraction, and energy-dispersive X-ray spectroscopy confirmed the chemical identity of goldene. We discovered the phenomenon of electric field-induced self-assembly of goldene supracrystals with a herringbone structure and developed an electric field printing (e-print) technique for goldene arrays. Goldene showed a semiconductor response with a knee voltage of ∼3.2 V, and I/V spectroscopy revealed periodic room temperature Coulomb blockade oscillations. These observations are consistent with the theoretical calculations reported in the literature predicting enhanced Coulombic interactions between gold valence electrons and the nucleus in stable 2D gold. Goldene exhibited multiple, intense, and well-resolved optical absorption peaks and several fine bands across the UV-vis region, and we calculated its optical band gap to be 3.59 eV. Magnetic force microscopy measurements of goldene periodic arrays showed a ∼5 mV peak amplitude confirming its ferromagnetism. Optical and magnetic properties of goldene are consistent with those reported in the literature for 2D planar gold clusters with less than 12 atoms.

California's experience with SMA newborn screening: A successful path to early intervention.

BACKGROUND: Universal spinal muscular atrophy (SMA) newborn screening was implemented in California on June 24, 2020. OBJECTIVE: We describe California's experience with the first 18 months of SMA newborn screening, including our assay methodology, timeliness of screening and follow-up milestones, and clinical and epidemiological outcomes observed. METHODS: Dried blood spots are screened for SMA using multiplex real time polymerase chain reaction (RT-PCR) to detect deletions of exon 7 in the survival of motor neuron 1 (SMN1) gene. Short-term follow-up data is collected from clinical staff via an online data collection tool. RESULTS: In the first 18 months, 628,791 newborns from California's diverse population were tested for SMA. Thirty-four screened positive and were confirmed to have the disorder. Infants were referred, diagnosed, and treated at a median of 8, 12, and 33 days of life, respectively. Nearly all infants received the desired treatment modality, and 62% received treatment while still asymptomatic. CONCLUSIONS: SMA newborn screening is a highly sensitive and specific test which identifies infants with SMA early when treatment is most effective. Even with newborn screening's success in facilitating early intervention, there is still work to be done to expedite treatment, especially for infants with the most severe form of the disease.