A novel long-acting biodegradable depot formulation of anastrozole for breast cancer therapy.

The purpose of the present study was to fabricate PLGA 50:50 and PLA microspheres for controlled delivery of anastrozole. The microspheres were prepared by oil-in-water (o/w) emulsion/solvent evaporation technique and evaluated for particle size and encapsulation. The optimised formulations were studied for solid state characterization, in vitro release and pharmacokinetic studies. The maximum encapsulation efficiency for PLGA 50:50 and PLA microspheres with 40:1 polymer - drug ratio was observed to be 78.4±2.5 and 87.7±2.6%. The solid state characterization confirmed dispersion of drug at the molecular level in the polymeric matrix. Microspheres were spherical in shape with a very smooth surface texture. Drug release was found to be in a sustained fashion, releasing constantly up to 720h (30days) for PLGA and 60days for PLA microspheres. The pharmacokinetic study data revealed that the intramuscular administration of PLA microspheres showed improved pharmacokinetic profile as compared to PLGA microspheres, and therefore this formulation can be considered as the best optimised formulation with sustained exposure of the drug in vivo compared to other microspheres. From experimental results, PLA microspheres demonstrate the feasibility of employing biodegradable depot polymeric microspheres of anastrozole for long-term treatment of breast cancer.

A novel nanoproliposomes of lercanidipine: Development, in vitro and preclinical studies to support its effectiveness in hypertension therapy.

AIM: The aim of the present study was to develop nanoproliposomes of lercanidipine, in order to overcome its poor biopharmaceutical properties and to improve its therapeutic efficacy in treating hypertension. MAIN METHODS: The nanoproliposomes were prepared using a modified thin-film hydration method, and the formula was optimized by varying the ratio of lipids and the types of cryoprotectants. This optimized formulation was characterized in terms of its particle size, solid-state, drug release, in-situ absorption, in-vivo pharmacokinetics, and in-vivo anti-hypertensive activity in DOCA-salt induced hypertensive rats. Finally, a PK-PD correlation was established in order to understand the clinical implications of the developed novel nanoproliposomes. KEY FINDINGS: The nanoproliposomes showed a particle size of 174.7nm and an entrapment efficiency of 85.4%. The in-vitro release displayed initial rapid release (19.33%) followed by a sustained release profile, releasing 88.37% of the encapsulated drug. The in-situ studies showed a significant increase in absorption rate across the rat intestinal membrane. The pharmacokinetics of this novel form indicated a 2.75-fold increase in the absolute bioavailability as compared to pure lercanidipine. In addition, the nanoproliposomes were found to be efficient in treating hypertension in DOCA-salt induced hypertensive rats. The PK-PD correlation demonstrated no time lag between effect and exposure, indicating that a direct PK-PD relationship can be expected in the clinic. SIGNIFICANCE: These findings suggest that nanoproliposomes are promising carriers in improving the oral bioavailability and bioactivity of lercanidipine, and can be an effective therapy in the management of hypertension.

PEGylated liposomes of anastrozole for long-term treatment of breast cancer: in vitro and in vivo evaluation.

The aim of present study was to develop conventional and PEGylated (long circulating), liposomes containing anastrozole (ANS) for effective treatment of breast cancer. ANS is a third-generation non-steroidal aromatase inhibitor of the triazole class used for the treatment of advanced and late-stage breast cancer in post-menopausal women. Under such disease conditions the median duration of therapy should be prolonged until tumor regression ends (>31 months). Liposomes were prepared by the thin film hydration method by using ANS and various lipids such as soyaphosphatidyl choline, cholesterol and methoxy polyethylene glycol distearoyl ethanolamine in different concentration ratios and evaluated for physical characteristics, in vitro drug release and stability. Optimized formulations of liposome were studied for in vitro cytotoxic activity against the BT-549 and MCF-7 cell lines and in vivo behavior in Wistar rats. Preformulation studies, both Fourier transform infrared study and differential scanning calorimetry analysis showed no interaction between the drug and the excipients used in the formulations. The optimized formulations AL-07 and AL-09 liposomes showed encapsulation efficiencies in the range 65.12 ± 1.05% to 69.85 ± 3.2% with desired mean particle size distribution of 101.1 ± 5.9 and 120.2 ± 2.8 nm and zeta potentials of -43.7 ± 4.7 and -62.9 ± 3.5 mV. All the optimized formulations followed Higuchi-matrix release kinetics and when plotted in accordance with the Korsemeyer-Peppas method, the n-value 0.5 < n < 1.0 suggests an anomalous (non-Fickian) transport. Likewise, the PEGylated liposomes showed greater tumor growth inhibition on BT-549 and MCF-7 cell lines from in vitro cytotoxicity studies (p < 0.05). Pharmacokinetic study of conventional and PEGylated liposomes in Wistar rats demonstrated a 3.33- and 20.28-fold increase in AUC(0-∞) values when compared to pure drug (p < 0.001). Among the formulations, PEGylated liposomes showed encouraging results by way of their long circulation and sustained delivery properties for effective treatment of breast cancer.

Nanomedicine of anastrozole for breast cancer: Physicochemical evaluation, in vitro cytotoxicity on BT-549 and MCF-7 cell lines and preclinical study on rat model.

AIM: Formulation and evaluation of anastrozole, an anti-cancer drug loaded in different biodegradable polymeric nanoparticles. MATERIALS AND METHODS: Different carrier systems such as poly(lactide-co-glycolide) (PLGA 50:50), poly(lactic-acid) (PLA) and poly(ε-caprolactone) (PCL) are used to prepare nanoparticles by simple emulsion technique. The surfactants polyvinyl alcohol and sodium deoxycholate were studied for their use as stabilizing agents at varying concentrations. The formulations were studied for their particle size, zeta potential, entrapment efficiency and solid state characteristics, and also were tested for their in vitro cytotoxicity and in vivo behavior in rats. KEY FINDINGS: The entrapment ranged from 35 to 85%, depending on the drug-polymer ratio used. Particle size ranged from 100 to 350nm with optimal zeta potential. Accordingly, discrete spherical nanoparticles with smooth surface were obtained as evidence from Field Emission Scanning Electron Microscopy (FESEM) study. The solid state characteristics revealed dispersion of drug at the molecular level in the polymeric matrix of nanoparticles. A non-Fickian transport with initial burst release followed by slow release was observed with nanoparticles. The remarkable decrease in cell viability at various time points was observed for PLGA nanoparticles compared to other polymer matrices. The AUC(0→∞) of PLGA, PLA and PCL nanoparticles were found to be 4.77, 19.31 and 19.81 fold higher than (p<0.05) anastrozole in solution, respectively. Also, pharmacokinetics study revealed the long time circulation of anastrozole loaded polymeric nanoparticles. SIGNIFICANCE: The results suggest that developed nanoparticles could be used successfully for effective management of breast cancer chemotherapy.

Controlled release chitosan microspheres of mirtazapine: in vitro and in vivo evaluation.

The purpose of the study was to formulate and evaluate controlled release chitosan microspheres of mirtazapine (MTZ) to improve the bioavailability by altering the pharmacokinetic profiles of the drug. Chitosan microspheres were prepared to prolong the release of the drug into the systemic circulation. Microspheres were prepared by a single water in oil (w/o) emulsion technique varying the chitosan/drug ratio, stirring speed and concentration of the crosslinking agent (glutaraldehyde). Drug-polymer compatibility studies were carried out using fourier transform infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC). The microspheres were evaluated for encapsulation efficiency, particle size, surface morphology, swelling index, in vitro release, as well as erosion and in vivo studies in rats. The FT-IR and DSC studies revealed no interaction between drug and polymer. The encapsulation efficiency of different formulation varied from 53 ± 1.2% to 78 ± 1.5%. The mean particle size of the optimized formulation F-14 was 106.4 ± 0.5 µm. Surface morphology revealed that chitosan microspheres were discrete and spherical in shape with a porous surface. The release of MTZ from chitosan microspheres was rapid up to 4 h, and then it was continuously and slowly released up to 48 h. Optimized formulation (F-14) was found to be stable under accelerated storage conditions based on International Conference on Harmonisation guidelines. Pharmacokinetic studies revealed that the optimized formulation showed significant increases in systemic exposure (AUC = 177.70 ± 7.39 µg·h/mL), half-life (4.72 ± 0.46 h) and reduced clearance (0.009 ± 0.0001 L/h) compared to pure drug administration. Hence, the present study demonstrates that controlled release formulation of MTZ microspheres using chitosan can improve pharmacokinetic profiles of MTZ.

Supercritical fluid technology: concepts and pharmaceutical applications.

In light of environmental apprehension, supercritical fluid technology (SFT) exhibits excellent opportunities to accomplish key objectives in the drug delivery sector. Supercritical fluid extraction using carbon dioxide (CO(2)) has been recognized as a green technology. It is a clean and versatile solvent with gas-like diffusivity and liquid-like density in the supercritical phase, which has provided an excellent alternative to the use of chemical solvents. The present commentary provides an overview of different techniques using supercritical fluids and their future opportunity for the drug delivery industry. Some of the emerging applications of SFT in pharmaceuticals, such as particle design, drug solubilization, inclusion complex, polymer impregnation, polymorphism, drug extraction process, and analysis, are also covered in this review. The data collection methods are based on the recent literature related to drug delivery systems using SFT platforms. SFT has become a much more versatile and environmentally attractive technology that can handle a variety of complicated problems in pharmaceuticals. This cutting-edge technology is growing predominantly to surrogate conventional unit operations in relevance to the pharmaceutical production process. LAY ABSTRACT: Supercritical fluid technology has recently drawn attention in the field of pharmaceuticals. It is a distinct conception that utilizes the solvent properties of supercritical fluids above their critical temperature and pressure, where they exhibit both liquid-like and gas-like properties, which can enable many pharmaceutical applications. For example, the liquid-like properties provide benefits in extraction processes of organic solvents or impurities, drug solubilization, and polymer plasticization, and the gas-like features facilitate mass transfer processes. It has become a much more versatile and environmentally attractive technology that can handle a variety of complicated problems in pharmaceuticals. This review is focused on different techniques that use supercritical fluids and their opportunities for the pharmaceutical sector.

Enhanced dissolution and bioavailability of gliclazide using solid dispersion techniques

Gliclazide is practically insoluble in water and its bioavailability is limited by dissolution rate. To enhance the dissolution rate and bioavailability the present study was aimed to formulate solid dispersions using different water soluble polymers such as polyethylene glycol 4000 (PEG 4000), polyethylene glycol 6000 (PEG 6000) using fusion method and polyvinyl pyrrolidone K- 30 (PVP K 30) by solvent evaporation method. The interaction of gliclazide with the hydrophilic polymers was studied by Differential Scanning Calorimetry (DSC), Fourier Transformation-Infrared Spectroscopy (FTIR) and X-Ray diffraction analysis. Solid dispersions were characterized for physicochemical properties like drug content, surface morphology and dissolution studies. Various factors like type of polymer and ratio of the drug to polymer on the solubility and dissolution rate of the drug were also evaluated. Pharmacokinetic studies of optimized formulation were compared with pure drug and marketed formulation in wistar rats. The dissolution of the pure drug and solid dispersion prepared with PVP K 30 (1:1) showed 38.3 + 4.5 % and 95 + 5.2 % release respectively within 30 min. Peak plasma concentration of pure drug, solid dispersion (PVP K 30) and marketed formulation was found to be 8.76 + 2.5, 16.04 + 5.5 and 9.24 + 3.6 g/ml respectively, from these results it was observed that there is two fold increase in peak plasma concentration compared to pure drug. Solid dispersion is an effective technique in increasing solubility, dissolution rate and bioavailability of the poorly soluble drugs.