Proficiency of some synthetic alginate derivatives for sequestration of Iodine-131 from radioactive liquid waste.

The current effort in environmental remediation is aimed at removing iodine-131 radionuclide from radioactive liquid waste produced by an Egyptian nuclear power plant using some synthesised alginate derivatives. Two different copolymers, namely sodium alginate poly (acrylic acid) (P1) and sodium alginate poly (acrylic acid-methacrylic acid) (P2), are prepared using gamma radiation. The ability of these polymers to remove 131I radionuclide as sorbents has been investigated. The synthesised polymers exhibit excellent adsorption performance for 131I ions, and the adsorption equilibrium requires only 30 min, which reveals that the sorption process is kinetically faster than most of the other materials reported previously. The removal percents for 131I radionuclide at a pH of 3.0 at room temperature on P1 and P2 are 77.7% and 84.2%, respectively. The sorption capacities of the two polymers demonstrate that P2 > P1, with capacities of 67.9 and 58.5 mg/g, respectively. Four linear kinetic models are investigated: pseudo-first order, pseudo-second order, Elovich, and Weber-Morris models. Regarding their calculated parameters, these models indicate that the adsorption process of I-ions on both P1 and P2 is controlled by chemisorption. Four equilibrium isotherm models (Redlich-Peterson, Langmuir, Freundlich, and Harkin-Jura) are investigated, revealing that the adsorption process is a monolayer and multilayer process on a heterogeneous surface.

Utilization of different crown ethers impregnated polymeric resin for treatment of low level liquid radioactive waste by column chromatography.

The main goal of this study was to find a novel impregnated resin as an alternative for the conventional resin (KY-2 and AN-31) used for low and intermediate level liquid radioactive waste treatment. Novel impregnated ion exchangers namely, poly (acrylamide-acrylic acid-acrylonitril)-N,N'-methylenedi-acrylamide-4,4'(5')di-t-butylbenzo 18 crown 6 [P(AM-AA-AN)-DAM/DtBB18C6], poly (acrylamide-acrylic acid-acrylonitril)-N,N'-methylenediacrylamide-dibenzo 18 crown 6 [P(AM-AA-AN)-DAM/DB18C6], and poly (acrylamide-acrylic acid-acrylonitril)-N,N'-methylenediacrylamide-18 crown 6 [P(AM-AA-AN)-DAM/18C6] were prepared and their removal efficiency of some radionuclides was investigated. Preliminary batch experiments were performed in order to study the influence of the different derivatives of 18 crown 6 on the characteristic removal performance. Separation of (134)Cs, (60)Co, (65)Zn and ((152+154))Eu radionuclides from low level liquid radioactive waste was investigated by using column chromatography with P(AM-AA-AN)-DAM/DtBB18C6 and metal salt solutions traced with the corresponding radionuclides. Breakthrough data was obtained in a fixed bed column at room temperature (298K) using different bed heights and flow rates. The breakthrough capacities were found to be 94.7, 83.3, 58.7, 43.1 (mg/g) for (60)Co, (65)Zn, (134)Cs, and ((152+154))Eu, respectively. Pre-concentration and separation of all radionuclides under study have been carried out using different concentration of nitric and/or oxalic acids.

Sorption reaction mechanism of some hazardous radionuclides from mixed waste by impregnated crown ether onto polymeric resin.

A novel impregnated polymeric resin was practically tested as adsorbent material for removal of some hazardous radionuclides from radioactive liquid waste. The applicability for the treatment of low-level liquid radioactive waste was investigated. The material was prepared by loading 4,4'(5')di-t-butylbenzo 18 crown 6 (DtBB18C6) onto poly(acrylamide-acrylic acid-acrylonitril)-N, N'-methylenediacrylamide (P(AM-AA-AN)-DAM). The removal of (134)Cs, (60)Co, (65)Zn , and ((152+154))Eu onto P(AM-AA-AN)-DAM/DtBB18C6 was investigated using a batch equilibrium technique with respect to the pH, contact time, and temperature. Kinetic models are used to determine the rate of sorption and to investigate the mechanism of sorption process. Five kinetics models, pseudo-first-order, pseudo-second-order, intra-particle diffusion, homogeneous particle diffusion (HPDM), and Elovich models, were used to investigate the sorption process. The obtained results of kinetic models predicted that, pseudo-second-order is applicable; the sorption is controlled by particle diffusion mechanism and the process is chemisorption. The obtained values of thermodynamics parameters, DeltaH degrees , DeltaS degrees , and DeltaG degrees indicated that the endothermic nature, increased randomness at the solid/solution interface and the spontaneous nature of the sorption processes.