[The influence of the different polishing methods on the marginal sealing property of the computer aided design and computer aided manufacture zirconium dioxide full crown].

OBJECTIVE: To evaluate the influence of different polishing methods on marginal microleakage of zirconium dioxide full crown. METHODS: Thirty extracted premolars were selected and randomly divided into three groups, A, B and C, with 10 in each group. Group A was prepared with MANI TF-13 bur completely without the treatment of shoulder. The shoulder of group B was polished with MANI TR13-EF bur after the preparation using MANI TF-13. The shoulder of group C was polished with the dental pneumatic ultrasonic hand-piece of KaVo SONICflex after the preparation using MANI TF-13 bur. Five specimens after preparation were selected in each group. Fifteen CAD/CAM zirconium dioxide full crowns have been made. The crowns were bonded using PULPDENT resin cement, and the root canals were sealed using nail polish, and apical foramen were closed using flow resin. The test-pieces have been immersed in a 3% solution of methylene blue for 24 h. The condition of shoulder marginal microleakage was observed using light stereomicroscopy and evaluated in classification index. The remaining specimens in each group were used for roughness test and scanning electron microscope(SEM) experiment. The marginal microleakage situations of specimens in three groups was analyzed by SPSS 17.0. The enamel surface of different polishing methods was observed using SEM. RESULTS: The specimens in group C demonstrated the least marginal microleakage, and those in group B showed an intermediate level of marginal microleakage, and those in group A characterized the most serious marginal microleakage (total, χ2=44.610, P<0.01; among the different groups, P<0.05). The roughness experiment showed that specimens in group C achieve the smoothest results ([0.27±0.03] µm). Preparation shoulder polished using the dental pneumatic ultrasonic hand-piece demonstrated the best result under the SEM among the three groups. CONCLUSIONS: The anti-microleakage effectiveness of dental pneumatic ultrasonic hand-piece in shoulder refinement is better than ordinary shoulder treatment.

[Clinical results of ultrasound biometry in silicone oil-filled eye].

OBJECTIVE: To evaluate a method of ultrasound biometry in silicone oil-filled eye and its clinical results. METHODS: This was a series case study. According to the principle of measuring a distance with ultrasound, we compared the measured distance between a space filed with balanced salt solution and silicone oil at same height, to calculate a conversion factor (0.674) between them. A formula for corrective axial length in silicone oil-filled eye was established. The formula = ab + 0.674 x bc (a, b and c standing for the apex of the cornea, the posterior pole of the lens or the center of the capsular membrane and the anterior surface of the macular, respectively). The axial lengths of 150 silicone oil-filled eyes in 150 cases were then measured before and after silicone oil removal with Vivid 7 Dimension ultrasound. According to the axial length, they were divided into two groups, namely group 1 (the length < 25 mm) and group 2 (the length > or = 25 mm). In 76/150 eyes, before combined silicone oil removal and intraocular lens (IOL) implantation, the SRKT formula was used for intraocular lens calculation; the post-operative actual refraction was compared with the pre-operative predicted refraction and statistics analysis was made. RESULTS: The retinal condition of 150 silicone oil-filled eyes in 150 cases after 3 months' follow-up was stable after surgery. The results of the biometry were as follows. In the first group, the mean corrective axial lengths of 111 silicone oil-filled eyes before silicone oil removal was (22.77 +/- 1.00) mm (ranging from 21.10 to 24.90 mm); the mean axial lengths after silicone oil removal was (22.76 +/- 0.99) mm (ranging from 21.00 to 24.70 mm). The difference between them was not statistically significant (t = 0.518, P > 0.05). The vitreous cavity depth before and after silicone oil removal was (26.57 +/- 2.14) mm and (17.90 +/- 1.38) mm, respectively. The ratio of the latter to the former was 0.673 78. In the second group, the mean corrective axial lengths of 39 silicone oil-filled eyes before silicone oil removal was (26.52 +/- 1.31) mm (ranging from 25.00 to 30.58 mm); the mean axial lengths after silicone oil removal was (26.53 +/- 1.29) mm (ranging from 25.00 to 30.59 mm). The difference between them was not statistically significant (t = 0.109, P > 0.05). The vitreous cavity depth before and after silicone oil removal was (32.01 +/- 2.90) mm and (21.57 +/- 2.04) mm, respectively. The ratio of the latter to the former was 0.673 95. In 76 eyes with IOL, the post-operative actual refraction after at least 3 months follow-up was compared with the pre-operative predicted refraction (-1.50 DS) in both groups. The differences between them were not statistically significant (t(1) = 0.253, P(1) > 0.05; t(2) = 0.209, P(2) > 0.05) in each group. CONCLUSION: Ultrasound biometry in silicone oil-filled eye is accurate and simple, and has good results in clinical measurement.