Interlaboratory validation of oxidation-index measurement methods for UHMWPE after long-term shelf aging.

An international oxidation index standard would greatly benefit the orthopedic community by providing a universal scale for reporting oxidation data of ultra-high molecular weight polyethylene (UHMWPE). We investigated whether severe oxidation associated with long-term shelf aging affects the repeatability and reproducibility of area-based oxidation index measurement techniques based on normalization with the use of 1370- or 2022-cm(-1) infrared (IR) absorption reference peaks. Because an oxidation index is expected to be independent of sample thickness, subsurface oxidation was examined with the use of both 100- and 200-microm-thick sections from tibial components (compression-molded GUR 1120, gamma irradiated in air) that were shelf aged for up to 11.5 years. Eight institutions in the United States and Europe participated in the present study, which was administered in accordance with ASTM E691. On average, the 100-microm-thick samples were associated with significantly greater interlaboratory relative standard uncertainty (40.3%) when compared with the 200-microm samples (21.8%, p = 0.002). In contrast, the intralaboratory relative standard uncertainty was not significantly affected by the sample thickness (p = 0.21). The oxidation index method did not significantly influence either the interlaboratory or intralaboratory relative standard uncertainty (p = 0.32 or 0.75, respectively). Our interlaboratory data suggest that with the suitable choice of specimen thickness (e.g., 200 microm) and either of the two optimal oxidation index methods, interlaboratory reproducibility of the most heavily oxidized regions in long-term shelf-aged components can be quantified with a relative standard uncertainty of 21% or less. Therefore, both the 1370-cm(-1) and the 2022-cm(-1) reference peaks appear equally suitable for use in defining a standard method for calculating an oxidation index for UHMWPE.

Interlaboratory studies to determine optimal analytical methods for measuring the oxidation index of UHMWPE.

Fourier transform infrared spectroscopy has emerged as the technique of choice for the quantification of oxidation in ultra-high molecular weight polyethylene used in orthopedic implants. We initiated interlaboratory studies to determine the method of normalization, hence quantification, that provided the highest level of reproducibility across multiple institutions. The goal of this research was to identify optimal normalization methods that minimize the experimental uncertainties associated with interlaboratory reproducibility and intralaboratory repeatability of oxidation index measurements. Test samples were prepared from GUR 4150 HP, gamma irradiated in air, and had a shelf age of two years. Samples were analyzed according to ten oxidation index test methods during two interlaboratory studies, which were conducted in accordance with ASTM E691. Variations in reproducibility and repeatability were evaluated using analysis of variance (ANOVA). The basis of the test methods (peak area-based vs. peak height-based), as well as the normalization method, were both found to be associated with significant differences in reproducibility (p = 0.0006 andp < 0.0001, respectively). Normalization techniques based on the 1370 and 2022cm(-1) peaks areas were found to be the most reproducible methods, and were associated with mean interlaboratory uncertainties of 16.5% and 24.2%, respectively. Repeatability of the test methods was not sensitive to the normalization technique; the mean intralaboratory repeatability for all of oxidation index measurements was found to be 10.2%. The results of this interlaboratory research will be a useful basis for the development of a new oxidation index standard for the orthopedics community.

Interlaboratory reproducibility of standard accelerated aging methods for oxidation of UHMWPE.

During accelerating aging, experimental uncertainty may arise due to variability in the oxidation process, or due to limitations in the technique that is ultimately used to measure oxidation. The purpose of the present interlaboratory study was to quantify the repeatability and reproducibility of standard accelerated aging methods for ultra-high molecular weight polyethylene (UHMWPE). Sections (200 microm thick) were microtomed from the center of an extruded rod of GUR 4150 HP, gamma irradiated in air or nitrogen, and circulated to 12 institutions in the United States and Europe for characterization of oxidation before and after accelerated aging. Specimens were aged for 3 weeks at 80 degrees C in an air circulating oven or for 2 weeks at 70 degrees C in an oxygen bomb (maintained at 503 kPa (5 atm.) of O2) in accordance with the two standard protocols described in ASTM F 2003-00. FTIR spectra were collected from each specimen within 24 h of the start and finish of accelerated aging, and oxidation indices were calculated by normalizing the peak area of the carbonyl region by the reference peak areas at 1370 or 2022 cm(-1). The mean relative interlaboratory uncertainty of the oxidation data was 78.5% after oven aging and 129.1% after bomb aging. The oxidation index measurement technique was not found to be a significant factor in the reproducibility. Comparable relative intrainstitutional uncertainty was observed after oven aging and bomb aging. For both aging methods, institutions successfully discriminated between air-irradiated and control specimens. However, the large interinstitutional variation suggests that absolute performance standards for the oxidation index of UHMWPE after accelerated aging may not be practical at the present time.

Effect of sterilization method and other modifications on the wear resistance of acetabular cups made of ultra-high molecular weight polyethylene. A hip-simulator study.

BACKGROUND: Wear of ultra-high molecular weight polyethylene acetabular cups in hip prostheses produces billions of submicrometer wear particles annually that can cause osteolysis and loosening of the components. Thus, substantial improvement of the wear resistance of ultra-high molecular weight polyethylene could extend the clinical life span of total hip prostheses. It has become apparent that the conditions under which ultra-high molecular weight polyethylene cups have been sterilized can markedly affect their long-term wear properties, and new sterilization methods and other modifications have been developed to minimize the negative effects. METHODS: In the present study, a hip-joint simulator was used to assess whether it is preferable to sterilize ultra-high molecular weight polyethylene cups without gamma irradiation, to avoid radiation-induced oxidative degradation, or to sterilize with gamma irradiation while the cups are packaged in a suitable low-oxygen atmosphere to minimize oxidation while retaining the increased wear resistance conferred by the radiation-induced cross-linking. Ion-implanted cups and cups made of a highly crystalline polyethylene (Hylamer) also were investigated. Cups made of each material were subjected to wear-testing prior to and after artificial thermal aging to accelerate oxidative degradation. RESULTS: The results of the present study demonstrated that the cross-linking induced by gamma irradiation improves the wear resistance of ultra-high molecular weight polyethylene, while oxidation reduces it. Without thermal aging, the two types of cups that were sterilized with gamma irradiation while in low-oxygen packaging exhibited about a 50 percent lower rate of wear than did either the nonsterilized cups or the nonirradiated cups sterilized with gas plasma. There was a comparable advantage in the rate of wear after fourteen days of thermal aging. However, after thirty days of aging, the cups sterilized with gamma irradiation in low-oxygen packaging wore several times faster than did the nonirradiated cups. Ion-implanting improved the wear resistance without thermal aging, but after extensive thermal aging the oxidation and wear were greater than those of the controls. Hylamer cups (that is, those that were sterilized with gas plasma) exhibited wear properties very close to those of the nonsterilized ultra-high molecular weight polyethylene cups (the controls) with or without aging. CONCLUSIONS: Sterilizing an ultra-high molecular weight polyethylene acetabular cup without radiation (for example, with ethylene oxide or gas plasma) avoids immediate and long-term oxidative degradation of the implant but does not improve the inherent wear resistance of the polyethylene. Sterilizing with use of gamma irradiation with the implant packaged in a low-oxygen atmosphere avoids immediate oxidation and cross-links the polyethylene, thereby increasing its wear resistance, but long-term oxidation of the residual free radicals may markedly reduce the wear resistance. Ideally, cross-linking with gamma irradiation to reduce wear should be done in a manner that avoids both immediate and long-term oxidation.

Wear of gamma-crosslinked polyethylene acetabular cups against roughened femoral balls.

Crosslinking of ultrahigh molecular weight polyethylene has been shown to markedly improve its wear resistance in clinical studies and laboratory tests using hip joint simulators. However, because most of the laboratory studies have been done under clean conditions using prosthesis-quality, highly polished counterfaces, there is concern regarding how well an intentionally crosslinked polyethylene acetabular cup will resist abrasion by a femoral ball that has been damaged by third-body abrasion in vivo. To investigate this, conventional and radiation crosslinked-remelted acetabular cups of ultra-high molecular weight polyethylene were tested in a hip joint simulator bearing against smooth femoral balls and against balls with moderate and severe roughening. Cups were tested with and without aging to accelerate any oxidative degradation. The crosslinked cups were produced by exposing extruded GUR 4150 bar stock of ultrahigh molecular weight polyethylene to 5 Mrad gamma radiation under a partial vacuum and then the bars were remelted to extinguish residual free radicals. Artificial aging at 70 degrees C under 5 atm oxygen for 14 days induced negligible oxidation in the crosslinked and remelted material. Against smooth balls, the wear of the crosslinked cups, with or without aging, averaged approximately 15% of that of the conventional cups. Against the moderately rough balls, the wear rate of the conventional cups was unchanged, whereas the wear rate increased slightly for the nonaged and aged crosslinked cups, but was still only 26% and 20% of that of the conventional cups, respectively. Against extremely rough balls, the mean wear rates increased markedly for each material such that during the final 1 million cycle interval, the average wear rates of the nonaged and the aged crosslinked cups were 72% and 47% of that of the conventional cups, respectively. That is, the crosslinked polyethylene showed substantially better wear resistance than conventional polyethylene across the range of ball roughnesses, with or without accelerated aging.

Potential errors in FTIR measurement of oxidation in ultrahigh molecular weight polyethylene implants.

Potential sources of error in the use of FTIR to measure the level of oxidation in ultrahigh molecular weight polyethylene acetabular cups were evaluated using cups from a hip simulator wear study with and without artificial aging, as well as cups retrieved from clinically failed hip prostheses. Oxidation was measured as a function of depth below the bearing surface using transmission FTIR on microtomed sections of the cups. To account for the variation of the thickness of the microtomed sections, oxidation was plotted as the ratio of the absorbance of the carbonyl groups to the absorbance of a reference band at 2022 cm-1. Overnight soaking in hexane reduced the apparent levels of oxidation, presumably due to the extraction of absorbed contaminants. In cups with low to moderate levels of oxidation, the reference absorption was relatively independent of the level of oxidation and was linearly proportional to the thickness of the specimens, providing reproducible oxidation ratios. However, the scatter in the reference absorption and in the apparent oxidation ratio increased with increasing levels of oxidation and was greatest for the thickest (400 microm) microtomed sections. The profiles of the oxidation ratios for a given specimen that were plotted by the present study method could be numerically adjusted to coincide with the ratios plotted using the methods of two previous investigators, providing conversion factors that are useful for comparing results among the studies.

Effect of molecular weight, calcium stearate, and sterilization methods on the wear of ultra high molecular weight polyethylene acetabular cups in a hip joint simulator.

Orthopaedic surgeons must currently choose from several types of ultra high molecular weight polyethylene acetabular cups that differ in their material properties and in the methods used for their sterilization. Information on the wear resistance of these different cups may help in the selection process. This study included two separate tests for wear run on a hip simulator to investigate the effect of molecular weight, calcium stearate, and sterilization methods on the wear resistance of ultra high molecular weight polyethylene acetabular cups. Test 1 revealed nearly identical wear rates for acetabular cups with molecular weights in two distinct ranges, as well as for cups with molecular weights in the same range but with or without calcium stearate added. In Test 2, cups that were sterilized in air with gamma irradiation exhibited lower rates of wear than those sterilized with ethylene oxide, presumably due to the crosslinking induced by the irradiation. In addition, cups that were irradiated while packed in a partial vacuum to minimize oxygen absorbed in the surface layer initially showed lower rates of wear than those irradiated in air, with the wear rates becoming similar as wear penetrated the more oxidized surface layer and the more crosslinked subsurface region. Because these tests were run a few months after the irradiation, the potential effects of long-term oxidation of any residual free radicals in the irradiated materials could not be taken into account. After artificial aging to accelerate oxidative degradation of the materials, the wear rates could be markedly different. Analyses performed after wear indicated that the irradiated (i.e., crosslinked) cups exhibited a smaller proportion of, as well as shorter, fibrils in the wear debris and an increased crystallinity and melting temperature and that gamma irradiation in the low-oxygen environment reduced the level of oxidation and increased the level of crosslinking in the surface region of the cups.

Development of an extremely wear-resistant ultra high molecular weight polyethylene for total hip replacements.

Osteolysis induced by ultra high molecular weight polyethylene wear debris is one of the primary factors limiting the lifespan of total hip replacements. Crosslinking polyethylene is known to improve its wear resistance in certain industrial applications, and crosslinked polyethylene acetabular cups have shown improved wear resistance in two clinical studies. In the present study, crosslinked polyethylene cups were produced by two methods. Chemically crosslinked cups were produced by mixing a peroxide with ultra high molecular weight polyethylene powder and then molding the cups directly to shape. Radiation-crosslinked cups were produced by exposing conventional extruded ultra high molecular weight polyethylene bar stock to gamma radiation at various doses from 3.3 to 100 Mrad (1 Mrad = 10 kGy), remelting the bars to extinguish residual free radicals (i.e., to minimize long-term oxidation), and then machining the cups by conventional techniques. In hip-joint simulator tests lasting as long as 5 million cycles, both types of cross-linked cups exhibited dramatically improved resistance to wear. Artificial aging of the cups by heating for 30 days in air at 80 degrees C induced oxidation of the chemically crosslinked cups. However, a chemically crosslinked cup that was aged 2.7 years at room temperature had very little oxidation. Thus, whether substantial oxidation of chemically crosslinked polyethylene would occur at body temperature remains unclear. The radiation-crosslinked remelted cups exhibited excellent resistance to oxidation. Because crosslinking can reduce the ultimate tensile strength, fatigue strength, and elongation to failure of ultra high molecular weight polyethylene, the optimal crosslinking dose provides a balance between these physical properties and the wear resistance of the implant and might substantially reduce the incidence of wear-induced osteolysis with total hip replacements.

Morphology of chemically crosslinked ultrahigh molecular weight polyethylene.

Morphological characterization of chemically crosslinked ultrahigh molecular weight polyethylene was performed by differential scanning calorimetry and scanning electron microscopy. The lamellar thickness of nascent UHMWPE inferred from DSC endotherms showed a very broad distribution, which was reduced significantly after melting and recrystallizing in DSC. Peroxide crosslinking further reduced the lamellar thickness distribution compared to uncrosslinked samples. After gamma-irradiation, a slowly cooled peroxide-free sample showed a greater increase in lamellar thickness distribution. Examination of the morphology of freeze-fractured surfaces by SEM showed that a slowly cooled peroxide-free UHMWPE exhibited a rougher fracture while chemically crosslinked samples showed a smoother fracture. After compression molding at 300 degrees C for 2 h, the grain boundaries between particles disappeared for all UHMWPE samples, indicating a complete fusion of the original flakes.

The immunological effect of 8-methoxypsoralen and UVA treatment on murine T-cell leukemia.

8-Methoxypsoralen (8-MOP) plus long-wavelength UV radiation (UVA, 320-400 nm) have been used to treat various diseases such as cutaneous T-cell lymphoma, systemic scleroderma, rheumatoid arthritis and rejection of heart transplants. However, the immunological mechanism of this treatment remains unknown. In this report, we investigated the effect of 8-MOP/UVA on the modulation of the immunogenicity of a T-cell leukemia cell line (RL male 1 cells). The results demonstrated that the stimulator function of the in vitro 8-MOP/UVA-treated RL male 1 cells was enhanced in both RL male 1-specific allogeneic and syngeneic immune responses. Furthermore, the enhancement of the immunogenicity of the 8-MOP/UVA-treated RL male 1 cells was found to be strongly associated with the increase of intercellular adhesion molecule-1 expression on these 8-MOP/UVA-treated tumor cells. Therefore, our findings suggested that the alteration of the expression of the immune-related cell surface molecules might be an important effect of 8-MOP/UVA treatment on the elevation of the immunogenicity of the 8-MOP/UVA-treated tumor cells.

A function of Ly-5 (CD-45) in the generation of lymphokine-activated killer cells defined by Ly-5 anti-sense oligodeoxyribonucleotides and Ly-5 monoclonal antibody.

The unique feature of the Ly-5 system is that it is a major cell surface glycoprotein, representing up to 10% of the total cell surface complement, confined to the hematopoietic cells as a family of isoforms generated by alternative splicing of a single Ly-5 gene. The cytoplasmic domain of Ly-5 has protein tyrosine phosphatase activity suggesting that Ly-5 is involved in signal transduction. We used Ly-5 anti-sense oligodeoxyribonucleotides (oligo) and Ly-5 monoclonal antibody (mAb) to study the functional role of Ly-5 in the concanavalin A mitogenesis response by spleen cells, as well as in the generation of lymphokine-activated killer cells and the proliferative response by spleen cells induced by recombinant human interleukin-2 (rhIL-2). Our results indicate that the Ly-5 mAb could enhance these activities whereas the anti-sense oligo was inhibitory. These data clearly suggest that Ly-5 is involved in the IL-2 and IL-2 receptor responsive circuit.

Discrimination of odortypes determined by the major histocompatibility complex among outbred mice.

Genetically determined body odors that distinguish one mouse from another are termed odortypes. The best known odortypes, highly expressed in urine, are those specified by H-2, the major histocompatibility complex of the mouse, but other odortypes originate from unidentified loci in the rest of the genome, including both sex chromosomes. The definition of H-2 odortypes and evidence that their perception affects reproductive behavior have so far depended on studies with inbred mouse strains whose genetic differences are confined to the H-2 complex of genes. To simulate feral conditions more closely, a freely segregating population was bred from crosses involving four unrelated inbred strains contributing four different H-2 haplotypes. After H-2 typing, this outbred population was divided into four groups of freely segregating mice, comprising the four distinct H-2 genotypes represented, to serve as conventional donors of urine for evaluation in the standard Y-maze system used in the training and testing of mice for H-2 odortype discrimination. With respect to utility in training mice for H-2 odortype discrimination, and to degrees of concordance attained in the Y-maze by trained mice, these urinary H-2 odortype sources from outbred mice were no less effective than urines customarily obtained for those purposes from nonsegregating inbred donors. We conclude that discrimination of H-2 odortypes is not appreciably affected or impaired by the usual concurrent segregation within the genome as a whole.

CD45 cell surface antigens are linked to stimulation of early human myeloid progenitor cells by interleukin 3 (IL-3), granulocyte/macrophage colony-stimulating factor (GM-CSF), a GM-CSF/IL-3 fusion protein, and mast cell growth factor (a c-kit ligand).

CD45 antigens are protein tyrosine phosphatases. A possible link was evaluated between expression of CD45 antigens on human myeloid progenitor cells (MPC) (colony-forming unit-granulocyte/macrophage [CFU-GM], burst-forming unit-erythroid [BFU-E], and colony-forming unit-granulocyte/erythroid/macrophage/megakaryocyte [CFU-GEMM]) and regulation of MPC by colony-stimulating factors (CSF) (interleukin 3 [IL-3], GM-CSF, G-CSF, M-CSF, and erythropoietin [Epo]), a GM-CSF/IL-3 fusion protein, and mast cell growth factor (MGF; a c-kit ligand). Treatment of cells with antisense oligodeoxynucleotides (oligos) to exons 1 and 2, but not 4, 5, or 6, of the CD45 gene, or with monoclonal anti-CD45, significantly decreased CFU-GM colony formation stimulated with GM-CSF, IL-3, fusion protein, and GM-CSF + MGF, but not with G-CSF or M-CSF. It also decreased GM-CSF, IL-3, fusion protein, and MGF-enhanced Epo-dependent BFU-E and CFU-GEMM colony formation, but had little or no effect on BFU-E or CFU-GEMM colony formation stimulated by Epo alone. Similar results were obtained with unseparated or purified (greater than or equal to one of two cells being a MPC) bone marrow cells. Sorted populations of CD343+ HLA-DR+ marrow cells composed of 90% MPC were used to demonstrate capping of CD45 after crosslinking protocols. Also, a decreased percent of CD45+ cells and CD45 antigen density was noted after treatment of column-separated CD34+ cells with antisense oligos to exon 1 of the CD45 gene. These results demonstrate that CD45 cell surface antigens are linked to stimulation of early human MPC by IL-3, GM-CSF, a GM-CSF/IL-3 fusion protein, and MGF.

Properties of the promoter region of the T18d (T13c) Tla gene.

The T18d (formerly T13c) gene of BALB/c mice belongs to the category of Tla genes which is expressed by both thymocytes and TL+ T-cell leukemias. To elucidate the regulation of T18d, different restriction fragments of the 5' flanking region between -457 and +146 were linked to the chloramphenicol acetyltransferase (CAT) gene and transfected into TL+ and TL- cells. By comparison of transiently expressed CAT activity among cells transfected with different CAT constructs, the results suggest that determination of TL+ vs TL- phenotypes is located within the region -105 to -33, and that an element essential to T18d expression resides within the region -33 to +54. Putative DNA-binding factors characterizing particular cell types and displaying selective affinity for particular T18d restriction fragments were identified by electrophoretic mobility shift assays with nuclear extracts (NEs). Two factors (or complexes) which bound specifically to the T18d fragment -105 to -33 were expressed preferentially in TL+ cells and thus may be involved in determining the tissue-selective expression of T18d. The close proximity of negative and positive cis-acting elements within the promoter region is consistent with regulation of T18d gene expression by a variety of trans-acting factors whose production is attuned to development and differentiation. The data provided may serve as a guide to study the regulation of other categories of Tla genes that are normally silent in thymocytes but may become expressed by leukemia cells.

A role for the interferon response DNA sequence in directing transcription of the T18d Tla gene.

T18d of BALB/c mice is a member of the Tla category of class I genes of the major histocompatibility complex of the mouse and is highly restricted in expression. Deletion analysis implies that an element essential to T18d expression resides within the region -4 to +54. The homologous region of T3d, a Tla gene which normally is not expressed in BALB/c mice, also has promoter activity. Thus the expressibility of T18d vs T3d is unlikely to be due to sequence differences in this region. A DNA-binding protein, factor VI, was found to bind to the region -33 to +54. DNase I footprinting analysis indicated that the DNA fragment 5'-ACTATAGTTTCACTTTTT-3' (+3 to +20) was protected by factor VI. This region includes the interferon response sequence (IRS). Homologous DNA segments of other class I genes, Ld and Dd, competed for factor VI in DNA-protein binding assay with lower affinity as compared with T18d. In mutation analysis, the 3' portion of the IRS is more important than the 5' portion with respect to binding affinity of factor VI and to transcriptional activity in transfected cells. This result signifies a role of IRS in T18d transcription and suggests that the mechanism of T18d transcription might be unusual.

Expression of the Q8/9d gene by T cells of the mouse.

The Q genes, specifying Qa antigens and situated in the extended part of the major histocompatibility complex (MHC) of the mouse, comprise a subgroup of MHC class I genes whose significance and function are still largely unknown. In screening a cDNA library made from the BALB/c inducer T-cell line Cl.Ly1-T1, we isolated 11 clones representing Q8/9, but none representing Q6 or Q7. Confirmatory evidence is given that the Q8/9 gene originated from fusion of the 5' region of the Q8 gene with the 3' region of the Q9 gene at a recombination site or hot spot in the vicinity of intron 4. Contrary to previous impressions that Q8/9 is an inert pseudogene, we find that the Q8/9 gene can be functional and encode a Qa-2, 3 antigen. One variety of the 11 Q8/9 clones isolated lacked exon 5, which encodes the transmembrane domain of class I glycoproteins, and thus may account for secretion of a soluble form of Qa-2, 3 antigen thought to be released by activated T cells.

Organization of the Ly-5 gene.

A single Ly-5 gene is known to generate a variety of transmembrane glycoprotein isoforms that distinguish various cell lineages and stages of differentiation within the hematopoietic developmental compartment of the mouse. Systems homologous to Ly-5 are known in rats and in humans. The complete exon-intron organization of the Ly-5 gene is described in this report. The Ly-5 gene occupies about 120 kilobases of chromosome 1 and comprises 34 exons, of which 32 (Ex-3 to Ex-34) are protein coding. Ex-1, Ex-2, and parts of Ex-3 and Ex-34 are untranslated. In all cDNA clones examined, either Ex-1 or Ex-2 was represented, but not both, implying that Ex-1 and Ex-2 in Ly-5 mRNA may be mutually exclusive. Primer extension and S1 nuclease protection mapping were used to identify initiation (cap) sites for transcription. The finding of putative cap sites for Ex-1 and Ex-2, and of corresponding TATA-like sequences, suggests the presence of two promoters. In both Ex-1+ and Ex-2+ cDNA clones the next exon is Ex-3, which has a translation-initiating codon. The intron between Ex-3 and Ex-4 is unusually long, about 50 kilobases. Evidence is given that Ex-5, like Ex-6 and Ex-7 (studied previously), is another alternative exon that is selectively programmed, alone or together with Ex-6 or Ex-7 or both, to generate actual or potential Ly-5 isoforms by alternative splicing.

Differential induction of class II gene expression in murine pre-B-cell lines by B-cell stimulatory factor-1 and by antibodies to B-cell surface antigens.

We have previously reported that BSF-1 and an alloantibody to the B-cell differentiation antigen Lyb2 induce class II gene expression in two Ia negative pre-B-cell lines. Two questions were asked in these studies. The first question is whether the different stimuli which we and others have shown to induce class II expression in B-cells act via the same signal transduction mechanisms. The second question is whether the traditionally accepted pathway of B-cell differentiation, as defined by immunoglobulin (Ig) gene rearrangement, is applicable to other events that occur during B-cell differentiation. In this report, we have therefore examined a large panel of pre-B-cell lines at different stages of Ig gene rearrangement in an attempt to 1) identify the stage in B-cell development where class II gene expression occurs and where it becomes inducible by BSF-1 or anti-Lyb2, and 2) compare the signal transduction mechanisms used by these ligands. The majority of pre-B-cell lines tested did not express BSF-1 receptors and were consequently noninducible for class II by BSF-1; such cell lines were, however, inducible for class II expression by anti-Lyb2 and, in addition, by antibodies to the B220 membrane glycoprotein. The induction of class II molecules by BSF-1 and by anti-Lyb2 and anti-B220 differed in several respects: 1) Induction by anti-Lyb2 and anti-B220 did not require the presence of BSF-1 receptors; 2) BSF-1 selectively induced class II antigen expression while anti-Lyb2 and anti-B220 induced the expression of other surface markers as well; and 3) PGE2 inhibited BSF-1 but not antibody-mediated class II induction. Finally, the presence of receptors for BSF-1 and the baseline expression of cell surface Ia was shown to be unlinked to Ig gene rearrangement and expression in this series of pre-B-cell lines. The independent regulation of Ia and Ig genes observed here may reflect a branching rather than a linear pathway for B-cell differentiation. The differentiation of pre-B-cells to mature Ig-secreting cells should probably not be defined solely by rearrangement of Ig genes, since this is likely to represent an oversimplified view of B-cell differentiation.

Alternative use of 5' exons in the specification of Ly-5 isoforms distinguishing hematopoietic cell lineages.

Previous inferences that Ly-5 glycoprotein isoforms of murine hematopoietic cells are generated by alternative splicing of primary transcripts of a single Ly-5 gene are supported by the present study. A cDNA library was prepared from B cells by extension from primer representing a known T-cell cDNA sequence. Three different Ly-5 clones from this library included sequences missing in T-cell cDNA clones. From the constitution of cDNA clones and of the Ly-5 gene, and from S1 nuclease mapping, it is concluded that at least two exons, provisionally numbered Ex-6(B) and Ex-7(B), in the 5'-proximal region are mainly represented in mRNA of the B-cell lines examined but not of the T-cell lines examined. Also, exons 1 and 2 appear to be used alternatively in different species of B-cell mRNA and probably also in different species of T-cell mRNA.