Preliminary application of 3D-printed individualised guiding templates for total hip arthroplasty in Crowe type IV developmental dysplasia of the hip.

OBJECTIVE: To evaluate the feasibility and accuracy of three-dimensional (3D)-printed individualised guiding templates in total hip arthroplasty (THA) for the treatment of developmental dysplasia of the hip (DDH). METHODS: 12 hips in 12 patients with Crowe type IV DDH were treated with THA. A 3D digital model of the pelvis and lower limbs was reconstructed using the computed tomography data of the patients. Preoperative surgical simulations were performed to determine the most suitable surgical planning, including femoral osteotomy and prosthesis placement. Based on the ideal surgical planning, individualised guiding templates were designed by software, manufactured using a 3D printer, and used in acetabulum reconstruction and femoral osteotomy during surgery. RESULTS: 12 patients were followed up for an average of 72.42 months (range 38-135 months). During surgery, the guiding template for each case was matched to the bony markers of the acetabulum and proximal femur. Preoperative and follow-up Harris Hip Scores were 34.2 ± 3.7 and 85.2 ± 4.2; leg-length discrepancy, 51.5 ± 6.5 mm and 10.2 ± 1.5 mm; and visual analogue scale scores, 6.2 ± 0.8 and 1.3 ± 0.3, respectively, with statistical difference. Shortened deformity and claudication of the affected limb were obviously improved after surgery. However, 1 patient had artificial hip dislocation 2 weeks after surgery, and another patient had sciatic nerve traction injury, both of whom recovered after physical treatment. CONCLUSIONS: Preoperative surgical simulation and 3D-printed individualised guiding templates can fulfil surgeon-specific requirements for the treatment of Crowe type IV DDH. Accurate THA can be achieved using 3D-printed individualised templates, which provide a new personalised surgical plan for the precise positioning and orientation of acetabular reconstruction and femoral osteotomy.

Anterior horizontal rafting plate to treat complex osteoporotic tibial plateau fractures: a technical note.

Complex tibial plateau fractures in elderly patients exhibiting severe osteoporosis and articular surface collapse are challenging. Decision-making is difficult when the posterior column is involved. Open reduction and internal fixation of complex tibial plateau fractures in patients with severe osteoporosis are prone to failure. In this paper, we describe a new method for the maintenance of the articular surface of complex tibial plateau fractures in elderly patients. An anterior horizontal rafting plate (3.5-mm-thick reconstruction and locking plate [Zimmer Inc., Warsaw, IN, USA]) is placed via conventional posteromedial and anterolateral incisions. The plate is inserted between the anterior bony surface of the proximal tibia and the subpatellar fat pad; plate positioning is checked under direct vision. The patient is encouraged to begin functional recovery soon after operation. Progressive weight-bearing begins at 10 weeks postoperatively and is gradually increased during fracture healing. Clinical follow-up was performed at 4, 8, and 12 weeks, 6 and 12 months, and yearly thereafter. No articular collapse or fragment displacement was evident on three-dimensional computed tomography performed 6 months after surgery. The knee range of motion was 5-130º at the last follow-up (4 years after surgery). This technique may be a good option for treating complex tibial plateau fractures, especially in elderly patients with severe osteoporosis.

Surgical Outcomes of Articular Surface Crush Injury of Hawkins â ¢ Talus Neck and Medial Malleolus Fracture.

The present study was performed to evaluate the effects of the medial and anterolateral approach combined with internal fixation by double head compression screws and countersunk K-wires for Hawkins Ⅲ talus neck and medial malleolus fracture. Eleven patients with articular surface crush injury resulting in Hawkins Ⅲ talus neck fractures accompanied by medial malleolus fractures were reviewed. All patients underwent emergency operations. The fractures were fixed using double head compression screws and countersunk K-wires through combined medial and anterolateral approaches. FAOS, AOFAS ankle-hindfoot scale, and VAS questionnaire scores were recorded. In addition, ROM of the ankle and postoperative complications were assessed. All patients were followed up for a median of 52.45 ±â€…5.15 months. The multiple scales data of FAOS on the affected side were: pain score 89.14 ±â€…7.08; activities of daily living score 89.57 ±â€…8.88; quality-of-life score 89.20 ±â€…7.44; sports score 75.00 ±â€…15.49; and other symptoms score 84.74 ±â€…7.51. The mean overall AOFAS ankle-hindfoot score was 88.36 ±â€…6.39. The VAS score was 0.72 ±â€…0.65. Ankle motion included dorsiflexion (13.18°â€…±â€…9.02°) and plantar flexion (32.27°â€…±â€…12.34°). Subtalar joint motion included eversion (10.91°â€…±â€…7.01°) and inversion (11.36°â€…±â€…7.45°). All scores of the healthy side were higher than those of the affected side (p < .05). In addition to ROM of the ankle and subtalar joint and sports score, various indicators of recovery rate had scores > 80%. One patient developed skin necrosis, which healed after debridement and wound dressing. Late complications included subtalar and/or ankle traumatic arthritis in six patients, four of whom showed no obvious clinical symptoms. In conclusion, the method of emergency surgery and medial and anterolateral approach combined with countersunk K-wires to fix small bone fragments to restore the integrity of the articular surface is acceptable for Hawkins Ⅲ talus neck with medial malleolus fracture.

miRNA-296-5p functions as a potential tumor suppressor in human osteosarcoma by targeting SND1.

BACKGROUND: The pathogenesis of osteosarcoma (OS) is still unclear, and it is still necessary to find new targets and drugs for anti-OS. This study aimed to investigate the role and mechanism of the anti-OS effects of miR-296-5p. METHODS: We measured the expression of miR-296-5p in human OS cell lines and tissues. The effect of miR-296-5p and its target gene staphylococcal nuclease and tudor domain containing 1 on proliferation, migration, and invasion of human OS lines was examined. The Student's t test was used for statistical analysis. RESULTS: We found that microRNA (miR)-296-5p was significantly downregulated in OS cell lines and tissues (control vs. OS, 1.802 ±â€Š0.313 vs. 0.618 ±â€Š0.235, t = 6.402, P < 0.01). Overexpression of miR-296-5p suppressed proliferation, migration, and invasion of OA cells. SND1 was identified as a target of miR-296-5p by bioinformatic analysis and dual-luciferase reporter assay. Overexpression of SND1 abrogated the effects induced by miR-296-5p upregulation (miRNA-296-5p vs. miRNA-296-5p + SND1, 0.294 ±â€Š0.159 vs. 2.300 ±â€Š0.277, t = 12.68, P = 0.003). CONCLUSION: Our study indicates that miR-296-5p may function as a tumor suppressor by targeting SND1 in OS.

Three-Dimensional Printing Technology for Surgical Correction of Congenital Scoliosis Caused by Hemivertebrae.

OBJECTIVE: This study aimed to explore the clinical application of three-dimensional (3D) printing technology in the surgical treatment of congenital scoliosis caused by hemivertebrae. METHODS: Twenty-four patients (11 in the 3D-printing group and 13 in the conventional group) with scoliosis secondary to a single hemivertebra were retrospectively reviewed. All patients underwent hemivertebrectomy and short-segment fixation. Virtual preoperative planning, operation simulation, and intraoperative application of 3D-printed patient-specific templates were performed in the 3D-printing group. Hemorrhage volume, operation time, transfusion, and complications were noted. Radiographic parameters were evaluated preoperatively, postoperatively, and at final follow-up. RESULTS: All patients had different degrees of successfully corrected scoliosis. There was a similar correction of the Cobb angle postoperatively between the 2 groups. The operation time, blood loss, transfusion, time for the insertion of each screw, accuracy of screw placement, and complication rate in the 3D-printing group were significantly superior to those in the control group. No patient experienced major complications. No significant correction loss or instrument dysfunction was observed during follow-up. CONCLUSIONS: As a viable and effective auxiliary technology, 3D printing makes it possible for surgery to meet both surgeon-specific and patient-specific requirements. 3D-printed individualized templates allow surgery for the correction of congenital scoliosis to enter a new stage of personalized precision surgery.

The reliability and validity of the modified Unified Classification System for periprosthetic femoral fractures after hip arthroplasty.

BACKGROUND: This study assessed the reliability and validity of the modified Unified Classification System for femur fractures after hip arthroplasty. METHODS: Four hundred and two cases were evaluated by 6 observers, 3 experts and 3 trainee surgeons. Each observer read the radiographs on 2 separate occasions and classified each case as to its type. Reliability was assessed by looking at the intraobserver and interobserver agreement using the Kappa statistic. Validity was assessed within the B group by looking at the agreement between the radiographic classification and the intraoperative findings. Interobserver and intraobserver agreement and validity were analyzed, using weighted kappa statistics. RESULTS: The mean k value for interobserver agreement was found to be 0.882 (0.833-0.929) for consultants (almost perfect agreement) and 0.776 (0.706-0.836) for the trainees (substantial agreement). Intraobserver k values ranged from 0.701 to 0.972, showing substantial to almost perfect agreement. Validity analysis of 299 type B cases revealed 89.854% agreement with a mean k value of 0.849 (0.770-0.946) (almost perfect agreement). CONCLUSIONS: This study has shown that the modified Unified Classification System is reliable and valid. We believe it is useful to improve the judgment of the implant stability, and establish the therapeutic strategy for periprosthetic femoral fracture.

"Out-in" position in the surgical treatment of three-column tibial plateau fractures: A technical note.

Three-column classification of tibial plateau fractures is based on computerized tomography (CT) images, and the patients with three-column fractures can be treated with posteromedial combined with anterolateral approach in the floating position. However, there are certain disadvantages to operating in a "floating position". Therefore, we proposed an "out-in" position for those fractures. The patient is placed in supine position on the operating table, and the healthy hip is elevated. For the posteromedial approach, the affected limb should be placed on a rectangular fluoroscopy table and kept in abduction and external rotation (out); for the anterolateral approach, the affected limb is retracted into the operating bed and kept in neutral position (in).This position has been shown to be highly effective for easy operation as well as intraoperative image monitoring. Furthermore, it highlights the advantage of anterior-posterior joint fracture reduction.

Suture anchors for primary deltoid ligament repair associated with acute ankle fractures.

The aim of the study is to evaluate the clinical effect of primary suture anchors repair in the treatment of deltoid ligament rupture associated with ankle fractures. 34 patients with acute deltoid ligament rupture associated with ankle fractures were selected between 2011 and 2014. Medial clear space (MCS), American Orthopaedic Foot and Ankle Society (AOFAS) scores, visual analog scale (VAS) were noted. The mean follow-up was 28.4 (range, 22-35) months. The mean AOFAS score was 92.6 (range, 90-95) and the mean VAS score was 1.06±0.65 (range 0 to 2) points at the final follow-up. The mean MCS is (9.10±4.99) mm before and (3.71±0.33) mm after surgery in radiographs. At the postoperative final follow-up, the mean MCS of injured ankle is (3.74±0.32) mm in radiographs, and (3.65±0.17) mm of uninjured contralateral ankle. Using suture anchors for the primary repair of deltoid ligament rupture during the treatment of ankle fractures can achieve satisfactory outcomes.

Reconstruction of Myerson type III chronic Achilles tendon ruptures using semitendinosus tendon and gracilis tendon autograft.

BACKGROUND: Reconstruction of Myerson type III (defect size more than 5 cm) chronic Achilles tendon ruptures (CATRs) is a surgical challenge due to its large Achilles tendon defect. This study aims to describe our operative technique for Myerson type III CATR and its clinical outcomes. PATIENTS AND METHODS: From May 2012 to April 2015, we treated seven patients (6 males, 1 female) with Myerson type III CATR using semitendinosus tendon and gracilis tendon autograft. The mean age was 47.3 years (range: 37-56). Patients were followed for a mean time of 31.3 months. All patients' defect size between Achilles ends after debridement was more than 5 cm and hence classified as Myerson type III. The clinical outcomes were evaluated by visual analog scale (VAS) for pain, American Orthopaedic Foot and Ankle Society (AOFAS) ankle and hindfoot score, Achilles tendon total rupture score (ATRS), and the Short Form 36 (SF-36). RESULTS: All patients reported good postoperative clinical outcomes. The average AOFAS score increased from 54.29 points (range: 46-65 points) preoperatively to 97.57 points (range: 90-100 points) at last follow-up. The average ATRS increased from 51.43 points (range: 40-61 points) preoperatively to 92.71 points (range: 83-100 points) at last follow-up. And the average VAS for pain was 0 at the last follow-up. The mean value of SF-36 physical increased from 32.14 points (range: 25-35 points) to 90 points (range: 80-95 points). And the mean value of SF-36 mental was improved from 37.14 points (range: 32-40 points) to 90.86 points (range: 84-96 points). CONCLUSIONS: Semitendinosus tendon combined gracilis tendon autograft is a safe and effective technique in the reconstruction of Myerson type III CATR.

Direct anterior approach for mini plate fixation of Regan-Morrey type II comminuted ulnar coronoid process fracture.

BACKGROUND: The goal of this study was to evaluate the clinical effect of Regan-Morrey type II comminuted coronoid process fracture treated with mini plate through the direct anterior approach (DAA). METHODS: Ten patients who underwent open reduction and internal fixation (ORIF) with mini plate through the DAA between February 2013 and August 2016 was included. There were three women and seven men, with an average age of 34.4 ± 7.5 years. At the final follow-up, the Mayo Elbow Performance Index (MEPS), Visual Analogue Scale (VAS) score, Disability of the Arm, Shoulder, and Hand (DASH) score, and the elbow range of motion were noted. RESULTS: The mean follow-up was 26.3 ± 2.2 (range 24-31) months. The mean elbow arc of motion was 118.5° with a mean arc of extension of 4° ± 5.2° and flexion of 122.5° ± 7.2°.The mean forearm pronation was 72° ± 7.2°, and the mean supination was 68° ± 6.3° with a mean forearm rotation arc of 140°. The average postoperative score according to the MEPS was 91 ± 5.7 points (range 80-100 points), and all patients achieved satisfactory scores (8 excellent and 2 good). The final average VAS score was 0.6 ± 1 (range 0-3). The final average DASH score was 4.0 ± 1.6 (range 2.3-7.4). None of the patients complained about elbow instability that required secondary surgery. No complications of infection, joint incongruency, fracture nonunion, median nerve palsy, or implant failure were reported. CONCLUSIONS: ORIF with mini plate through the DAA for the treatment of the type II comminuted coronoid process fractures can achieve satisfactory outcomes.

The surgical outcome of Lisfranc injuries accompanied by multiple metatarsal fractures: A multicenter retrospective study.

BACKGROUND: This study assessed the surgical outcomes of Lisfranc injuries accompanied by multiple metatarsal fractures. Metatarsal fractures here refers to metatarsal head, neck, and shaft (including shaft fractures accompanied by fractures of the base) fractures, as well as mixed (i.e., segmental fracture) fractures, as seen on imaging studies. METHODS: Between 2002 and 2015, one hundred and seventy-six patients were followed-up for a mean of 92 months, including eight patients who underwent secondary arthrodesis due to severe arthritis after ORIF. All the patients underwent surgical fusion (primary partial arthrodesis, PPA; n = 78) or non-fusion (percutaneous or open reduction and internal fixation, ORIF; n = 98) procedures and the outcomes were evaluated by clinical examinations, radiography, visual analogue scale (VAS) pain score, the American Orthopaedic Foot and Ankle Society (AOFAS) midfoot score, the Foot and Ankle Outcome Score (FAOS), and the Short Form (SF)-36 physical and SF-36 mental questionnaires. The parameters between the fusion and non-fusion groups were analyzed by repeated-measures ANOVA. Statistically significant differences between the two groups were then further analyzed using a two-independent-samples t-test. RESULTS: Anatomical reduction was achieved in 161 patients. At the last follow-up, the mean AOFAS score was 74.67 (range: 39-91) in the non-fusion group and 82.79 (range: 67-97) in the fusion group (P = 0.003). The PPA and ORIF groups differed significantly with respect to the VAS pain score (1.93 vs. 1.21), the SF-36 physical (75.87 vs. 80.90) and mental (75.76 vs. 81.33) components, and the FAOS pain (72.74 vs. 84.06), symptoms (71.87 vs. 82.49), activities of daily life (ADLs: 73.12 vs. 81.54), sport/recreation (sport/rec: 57.99 vs. 73.23), and quality of life (QoL: 79.95 vs. 86.67) components. In the ORIF group, 23 patients had mild/moderate post-traumatic osteoarthritis. CONCLUSIONS: With longer and more conservative postoperative management, fusion results in a better outcome than non-fusion in the treatment of Lisfranc injuries accompanied by multiple metatarsal fractures.

Modification of the Unified Classification System for periprosthetic femoral fractures after hip arthroplasty.

BACKGROUND: The Unified Classification System (UCS) for Periprosthetic femoral fractures (PPFF) still has some limitations. METHODS: We retrieved 18 previous classifications for PPFF based on systematic review of the literature, and also retrospectively analyzed 402 cases with PPFF. 46 cases (11.4%) were identified as beyond the classification scope of the original UCS. RESULTS: We modified the UCS as follows: (1) add two new B2 subtypes: B2PALT/B2PAGT (i.e., the pseudo ALT/AGT: Fracture in trochanter region including a segment of the proximal medial/lateral femoral cortex); (2) add a new FS category to encompass stem fracture alone or accompanied by PPFF, with FSO designating this fracture with stem fracture alone, FS1 designating this fracture with the proximal portion of the fractured femoral prosthesis being stable, FS2 designating this fracture with the proximal portion of the fractured femoral prosthesis being loose and the surrounding bone quality being good, and FS3 designating this fracture with the proximal portion of the fractured femoral prosthesis being loose and the bone bed being of poor quality; and (3) delete Type F which does not apply to the femur. Thus, using our modification of the UCS, among the 46 cases, we found thirty-five B2PALT, two B2PAGT, three FSO, one FS1, two FS2 and three SF3. CONCLUSIONS: Compared to the original UCS, our modified version is more comprehensive. We believe it is useful to improve the judgment of the implant stability, and establish the therapeutic strategy for PPFF.

Open Reduction And Internal Fixation Versus Primary Partial Arthrodesis For Lisfranc Injuries Accompanied By Comminution Of The Second Metatarsal Base.

The objective of this retrospective study was to compare open reduction and internal fixation (ORIF) with primary partial arthrodesis for the treatment of Lisfranc injuries accompanied by comminution of the second metatarsal base. Thirty-four patients were treated with ORIF or primary partial arthrodesis from 2007 to 2013. The patients were followed for an average of 28.5 months. Evaluation was performed with clinical examination, radiography, Visual Analogue Scale (VAS), the American Orthopedic Foot and Ankle Society (AOFAS) Midfoot Score, and the Short Form 36 (SF-36). Fifteen patients were treated with ORIF, and nineteen patients were treated with primary partial arthrodesis. Anatomical reduction was obtained in all patients. At two years postoperatively, the mean AOFAS Midfoot score was 84.33 points in the ORIF group and 85.05 points in the primary partial arthrodesis group (P> 0.05). Also, no significant differences were seen in the VAS for pain (1.20 vs 1.05 points), SF-36 physical component (79.60 vs 79.89 points) or SF-36 mental component (77.07 vs 79.21 points). With longer and conservative postoperative management, ORIF as well as primary partial arthrodesis for Lisfranc injuries accompanied by comminution of the second metatarsal base led to similar medium-term outcome.

Primary total knee arthroplasty for elderly complex tibial plateau fractures.

OBJECTIVE: The aim of this study is to evaluate the clinical and radiologic results of primary Total Knee Arthroplasty (TKA) for elderly complex tibial plateau fractures. MATERIALS AND METHODS: Between November 2010 and February 2012, six cases of elderly complex tibial plateau fractures were treated with primary TKA using the standard medial parapatellar approach. All six patients were available at follow up with mean duration of 32.3 months (range 25-41 months). There were 3 women and 3 men with an average age of 69.5 years (58-78 years) at the time of the arthroplasty. RESULTS: The mean Hospital for Special Surgery (HSS) knee score was 89.8 (range 85-94): 6/6 excellent. The mean knee flexion was 119.2° (105-130°). No significant postoperative complications were noted. None of these patients had significant postoperative knee pain required revision surgery, or had radiographic loosening of the components at the latest follow-up. CONCLUSIONS: TKA is a suitable solution for the treatment of elderly patients with complex tibial plateau fractures. LEVEL OF EVIDENCE: Level IV, Therapeutic study.

New fracture pattern focusing on implant fracture for periprosthetic femoral fractures.

PURPOSE: The Vancouver Classification System (VCS) for assessing periprosthetic femoral fractures has become universally accepted. The Unified Classification System (UCS) has expanded upon and updated the VCS and applied treatment principles to all periprosthetic fractures. However, periprosthetic femoral fractures accompanied by stem fracture after hip arthroplasty were not classifiable under the original VCS or the UCS. RESULTS: Our new fracture pattern is based on the periprosthetic femoral fracture as well as stem fracture after hip arthroplasty, and its treatment is dependent upon the stability of the proximal portion of the fractured femoral prosthesis. CONCLUSION: We believe that our new fracture pattern, a supplement to the VCS and UCS, is useful in the establishment of a therapeutic strategy for periprosthetic femoral fractures.

Computer-aided resection and endoprosthesis design for the management of malignant bone tumors around the knee: outcomes of 12 cases.

BACKGROUND: To report the outcomes of computer-aided resection and endoprosthesis design for the management of malignant bone tumors around the knee. METHODS: Computed tomography (CT) and magnetic resonance imaging (MRI) data were input into computer software to produce three-dimensional (3D) models of the tumor extent. Imaging data was then used to create a template for surgical resection, and development of an individualized combined allogeneic bone/endoprosthesis. Surgical simulations were performed prior to the actual surgery. RESULTS: This study included 9 males and 3 females with a mean age of 25.3 years (range, 13 to 40 years). There were 9 tumors in the distal femur and 3 in the proximal tibia. There were no surgical complications. In all cases pathologically confirmed clear surgical margins were obtained. Postoperative radiographs showed the range of tumor resection was in accordance with the preoperative design, and the morphological reconstruction of the bone defect was satisfactory with complete bilateral symmetry. The mean follow-up time was 26.5 months. Two patients died of their disease and the remaining are alive and well without evidence of recurrence. All patients are able to ambulate freely without restrictions. At the last follow-up, the average International Society of Limb Salvage score was 25.8 (range, 18 to 27), and was excellent in 8 cases and good in 4 cases. CONCLUSIONS: Computer-aided design and modeling for the surgical management of bone tumors and subsequent limb reconstruction provides accurate tumor removal with the salvage of a maximal amount of unaffected bone and precise endoprosthesis reconstruction.