Development of an insulin-like growth factor-1 certified reference material by SI-traceable isotope-dilution mass spectrometry.

In this study, an insulin-like growth factor-1 (IGF-1) certified reference material (CRM) was developed by the National Institute of Metrology (NIM), and two different principles for evaluating the IGF-1 CRM were established. After optimisation of the acid hydrolysis conditions (110 °C, 36 h), quantitative determination of peptide purity, and chromatographic separation and mass spectrometric detection, amino acid analysis-based high-performance liquid chromatography combined with isotope-dilution tandem mass spectrometry (AAA-HPLC-IDMS/MS) and peptide analysis-based HPLC-IDMS/MS (Peptide-HPLC-IDMS/MS) were used for certified value assignment; the results obtained were 136.28 and 135.01 µg/g, respectively, which were in good agreement. These results were subjected to the normal distribution test, outlier test, and method consistency test. The homogeneity and stability of the reference materials were also examined, and the uncertainty introduced in the experimental process was calculated. The final certified value was (136 ± 15) µg g-1 (k = 2). The CRM was found to be stable for at least six months when stored at -70 °C and for 7 d when stored at higher temperatures (-20 °C, 4 °C, 25 °C, or 40 °C). The CRM is expected to be used as a primary calibrator for quality control in biopharmaceutical production and clinical diagnostics.

Metabolomics-based component profiling of Halomonas sp. KM-1 during different growth phases in poly(3-hydroxybutyrate) production.

To investigate the relationship between the production of poly(3-hydroxybutyrate) (PHB) and metabolic changes during different growth phases, a non-sterile batch fermentation process involving an alkalophilic and halophilic bacterium, Halomonas sp. KM-1, was used. Intracellular metabolites were analyzed using gas chromatography-mass spectrometry to characterize the metabolic profile. Significant changes relating to PHB production were observed in the TCA cycle, lipid-synthesis and amino acid biosynthetic pathways were found to shift dramatically between the exponential growth and stationary phases. During the stationary phase, 17 metabolites were upregulated and a cell dry mass of 17.8 g/L that included 44.8% PHB was observed at 24h in 5% glucose-supplemented cultures, whereas 11 metabolites were upregulated and a cell dry mass of 38.4 g/L that included 73.7% PHB was observed at 36 h in 10% glucose-supplemented cultures. This study provides pattern analysis of metabolite regulation during PHB accumulation, indicating that multicomponent and phase-specific mechanisms are involved.

Taxonomic characterization and metabolic analysis of the Halomonas sp. KM-1, a highly bioplastic poly(3-hydroxybutyrate)-producing bacterium.

In a brief previous report, the gram-negative moderately halophilic bacterium, Halomonas sp. KM-1, that was isolated in our laboratory was shown to produce the bioplastic, poly(3-hydroxybutyrate) (PHB), using biodiesel waste glycerol (Kawata and Aiba, Biosci. Biotechnol. Biochem., 74, 175-177, 2010). Here, we further characterized this KM-1 strain and compared it to other Halomonas strains. Strain KM-1 was subjected to a polyphasic taxonomic study. Strain KM-1 was rod-shaped and formed colonies on a plate that were cream-beige in color, smooth, opaque, and circular with entire edges. KM-1 grew under environmental conditions of 0.1%-10% (w/v) NaCl, pH 6.5-10.5 and at temperatures between 10°C and 45°C. The G+C content of strain KM-1 was 63.9 mol%. Of the 16 Halomonas strains examined in this study, the strain KM-1 exhibited the highest production of PHB (63.6%, w/v) in SOT medium supplemented with 10% glycerol, 10.0 g/L sodium nitrate and 2.0 g/L dipotassium hydrogen phosphate. The intracellular structures within which PHB accumulated had the appearance of intracellular granules with a diameter of approximately 0.5 µm, as assessed by electron microscopy. The intra- and extra-cellular metabolites of strain KM-1 were analyzed by capillary electrophoresis mass spectrometry. In spite of the high amount of PHB stored intra-cellularly, as possible precursors for PHB only a small quantity of 3-hydroxybutyric acid and acetyl CoA, and no quantity of 3-hydroxybutyl CoA, acetoacetyl CoA and acetoacetate were detected either intra- or extra-cellularly, suggesting highly efficient conversion of these precursors to PHB.

A sheathless CE/ESI-MS interface with an ionophore membrane-packed electro-conduction channel.

A robust and convenient sheathless CE/ESI-MS interface realized with an ionophore membrane-packed electro-conduction channel is described. Sheathless interfaces that may provide higher sensitivity for MS detection than sheath flow-supported interfaces generally show instability and short lifetimes due to their imperfection in making an electrical contact with the emitter tip. In this work, we designed a sheathless interface based on an ionophore membrane-packed electro-conduction channel. At the joining point of the CE capillary and the emitter capillary, the conduction channel was implemented toward the exterior of the interface body, where a platinum wire electrode was placed. The conduction channel transferred the electric field from the external Pt electrode to the joining point, but prevented the effluent of CE from leaking. The interface body was designed to have receptacles for standard capillary tubing with finger-tight fittings, which allowed easy replacement of capillary tubing. Stable electrospray was observed for an extended time period without any signs of bubbling or damage to the emitter tip. No significant increment of dead-volume at the interface was observed for well-aligned capillaries. Sensitive and stable CE-MS detection of the model compound of creatinine and uric acid was demonstrated.