Braking Force Model on Virus Transmission to Evaluate Interventions Including the Administration of COVID-19 Vaccines - Worldwide, 2019-2021.

INTRODUCTION: Assessing the effects of non-pharmaceutical interventions (NPIs) and vaccines on controlling the coronavirus disease 2019 (COVID-19) is key for each government to optimize the anti-contagion policy according to their situation. METHODS: We proposed the Braking Force Model on Virus Transmission to evaluate the validity and efficiency of NPIs and vaccines. This model classified the NPIs and the administration of vaccines at different effectiveness levels and forecasted the duration required to control the pandemic, providing an indication of the future trends of the pandemic wave. RESULTS: This model was applied to study the effectiveness of the most commonly used NPIs according to the historic pandemic waves in different countries and regions. It was found that when facing an outbreak, only strict lockdown would give efficient control of the pandemic; the other NPIs were insufficient to promptly and effectively reduce virus transmission. Meanwhile, our results showed that NPIs would likely only slow down the pandemic's progression and maintain a low transmission level but fail to eradicate the disease. Only vaccination would likely have had a better chance of success in ending the pandemic. DISCUSSION: Based on the Braking Force Model, a pandemic control strategy framework has been devised for policymakers to determine the commencement and duration of appropriate interventions, with the aim of obtaining a balance between public health risk management and economic recovery.

Bias Controller of Mach-Zehnder Modulator for Electro-Optic Analog-to-Digital Converter.

As one of the core devices for an electro-optic analog-to-digital converter (ADC), the Mach-Zehnder (MZ) modulator plays an important role, and the output stability of the MZ modulator has a decisive influence on the conversion accuracy of the ADC. This paper proposed a pilot tone-based method to stabilize the bias point of the modulator. This method could obtain the corresponding control voltage of the MZ modulator by adding a KHz-level dither tone to the bias end of the modulator and calculating the ratio of the first and second harmonic components. The experimental results showed that the output optical power of the modulator was stable at 3.2 dB when the bias point of the modulator was set at the orthogonal point. Moreover, the fluctuation range was not more than 0.15 dB, the first harmonic of the output signal was stable at 50.5 dB, and the fluctuation range was not more than 0.6 dB. The proposed bias controller based on the field programmable gate array (FPGA) and digital signal processing (DSP) can stabilize the modulator bias point at the orthogonal point and with a relatively high locking accuracy.

A Self-Powered Engine Health Monitoring System Based on L-Shaped Wideband Piezoelectric Energy Harvester.

Engine health monitoring is very important to maintain the life of engines, and the power supply to sensor nodes is a key issue that needs to be solved. The piezoelectric vibration energy harvester has attracted much attention due to its obvious advantages in configuration, electromechanical conversion efficiency, and output power. However, the narrow bandwidth has restricted its practical application. A self-powered engine health monitoring system was proposed in this paper, and an L-shaped wideband piezoelectric energy harvester was designed and implemented. The L-shaped beam-mass structure and the piezoelectric bimorph cantilever beam structure was combined to form the wideband piezoelectric energy harvester configuration, which realized effective output at both resonance points. The theoretical model and finite element simulation analysis of the wideband piezoelectric energy harvester were proposed and the parameters were optimized based on that to meet the requirement of the vibration frequency of the engine. The experimental results show that the proposed energy harvester can be applied into the automobile engine health monitoring system. Engine signal analysis results also demonstrate that the proposed system can be used for engine health monitoring.

An Adaptable Interface Conditioning Circuit Based on Triboelectric Nanogenerators for Self-Powered Sensors.

In order to solve the limited life problem of typical battery power supply, a self-powered method that is based on the environmental energy harvesting has emerged as an amazing power supply approach. The Tribo-electric-Nano-generator (TENG) has been widely studied because of its high efficiency, low fabrication cost, and high output voltage. However, low output power conversion efficiency has restricted its practical application because of its own extremely high output impedance. In order to match the high output impedance of TENG and increase the output power, this paper presents an adaptable interface conditioning circuit, which is composed of an impedance matching circuit, a synchronous rectifier bridge, a control circuit, and an energy storage device. In the impedance matching circuit, the energy loss of coupling inductance could be reduced by using the bi-directional switch to increase the frequency, and impedance matching circuit can be used to increase the output efficiency of TENG. Experimental results show that, in about 3.6 s, the storing capacitor voltage was basically stable at 5.5 V by using the proposed adapted interface conditioning circuit in this paper. The charging efficiency has increased by 50%.

The Degradation Properties of MgO Whiskers/PLLA Composite In Vitro.

In this study, composite films of stearic acid⁻modified magnesium oxide whiskers (Sa⁻w-MgO)/poly-l-lactic acid (PLLA) were prepared through solution casting, and the in vitro degradation properties and cytocompatibility of the composites with different whisker contents were investigated. The results showed that the degradation behavior of the composite samples depended significantly on the whisker content, and the degradation rate increased with the addition of MgO content. Furthermore, the degradation of the composites with higher contents of whiskers was influenced more severely by the hydrophilicity and pH value, leading to more final weight loss, but the decomposition rate decreased gradually. Furthermore, the pH value of the phosphate buffer solution (PBS) was obviously regulated by the dissolution of MgO whiskers through neutralization of the acidic product of PLLA degradation. The cytocompatibility of the composites also increased remarkably, as determined from the cell viability results, and was higher than that of PLLA at the chosen whisker content. This was beneficial for the cell affinity of the material, as it notably led to an enhanced biocompatibility of the PLLA, in favor of promoting cell proliferation, which significantly improved its bioactivity, as well.