1,5-anhydroglucitol biosensor based on light-addressable potentiometric sensor with RGO-CS-Fc/Au NPs nanohybrids.

In this paper, a novel silicon-based light-addressable potentiometric sensor (LAPS) has been designed for the detection of 1,5-anhydroglucitol (1,5-AG) in human serum. Reduced graphene oxide-chitosan-ferrocene (RGO-CS-Fc)/AuNPs nanohybrids and pyranose oxidase (PROD) enzyme is used to fabricate biological sensitive membrane unit by layer-by-layer assembly technology. When a bias voltage is provided to the LAPS system, the catalytic oxidation reaction between 1,5-AG and PROD to produce H2O2. The by-product H2O2 can oxidize Fc(Fe2+) ions in RGO-CS-Fc nanohybrids into Fc(Fe3+) ions, which cause the potential of the sensitive membrane surface to change and the potential shift of I-V curve will generate a corresponding offset response. Under the optimal conditions, the potential shift of the LAPS is linearly related to the concentration of 1,5-AG at 10 µg·mL-1 -350 µg·mL-1 with the correlation coefficient of 0.97414. The sensitivity is 0.44273 mV/µg·mL-1 and the lowest detection limit is 10 µg·mL-1. In addition, the biosensor showed good specificity, acceptable stability and satisfactory recovery rates (91.28%-107.66%), which would be a potential testing methods in actual clinical samples.

Highly sensitive electrochemical aptasensor for Glypican-3 based on reduced graphene oxide-hemin nanocomposites modified on screen-printed electrode surface.

Glypican-3 (GPC3) is a highly specific tumor marker for hepatocellular carcinoma (HCC), and plays an important role in reflecting the existence, therapeutic evaluation, monitoring and prognosis of HCC. Herein, an electrochemical aptasensor was designed for GPC3 detection with the reduced graphene oxide-hemin nanocomposites (RGO-Hemin) modified on the screen-printed electrode surface as the sensing platform and GPC3 aptamer as recognize molecule. In the existence of GPC3, the aptamer can specifically bind with the target GPC3 and form GPC3-aptamer conjugations on the sensing surface, which would increase the resistance of the electron transfer on the electrode and make the decrease of electrochemical signals of Hemin in RGO-Hemin nanocomposites. The electrochemical current change was recorded by differential pulse voltammetry (DPV). Scanning electron microscopy (SEM), Raman microscope (RM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to characterize the GPC3 electrochemical aptasensor. Under the optimum conditions, the current response of the electrochemical aptasensor is linearly correlated with the concentration of GPC3 (0.001-10.0 µg/mL) with the detection limit of 2.86 ng/mL (S/N = 3) and the sensitivity of 0.134 µA/µM/cm2. In addition, the aptasensor was applied to the determination of GPC3 in spiked human plasma and the recoveries fluctuated from 102.68% to 117.29%. All these results show that the aptasensor has good specificity, sensitivity, stability and reproducibility for GPC3 detection.

Glypican-3 electrochemical aptamer nanobiosensor based on hemin/graphene nanohybrids peroxidase-like catalytic silver deposition.

A Glypican-3 (GPC3) electrochemical aptamer nanobiosensor based on hemin/graphene nanohybrids (HGNs) peroxidase-like catalytic silver deposition and GPC3 aptamer has been constructed for the determination of GPC3. The HGNs were prepared by an one-step reduction method. Fourier transform infrared spectroscopy (FT-IR), ultraviolet spectroscopy (UV-vis), and transmission electron microscopy (TEM) were used to study the structure and morphological characteristics of the HGNs. The GPC3 electrochemical aptamer nanobiosensor was constructed using HGNs-aptamer (HGNs-Apt) as the signal probe and GPC3 aptamer as the capture probe. With the help of the catalytic action of peroxidase-like properties of HGNs, H2O2 reduces the silver (Ag) ions in solution to metallic Ag, which deposit on the surface of the electrode. The amount of deposited Ag, which was derived from the amount of GPC3, was quantified by differential pulse voltammetry (DPV). Under optimal conditions, the current response of Ag had a good positive correlation with the GPC3 concentration in the range 10.0-100.0 µg mL-1 with a correlation coefficient of 0.9958. The detection limit was 3.16 µg mL-1 at a signal-to-noise ratio of 3, and the sensitivity was calculated to be 0.807 µA µM-1 cm-2. The method is validated by analyzing spiked human serum samples with good recovery ranging from 101 to 122%. In addition, the GPC3 electrochemical aptamer nanobiosensor has acceptable selectivity, stability, and reproducibility. Graphical abstract A Glypican-3 electrochemical aptamer nanobiosensor based on hemin/graphene nanohybrids (HGNs) peroxidase-like catalytic silver deposition and GPC3 aptamer has been constructed for the determination of GPC3. The electrochemical aptamer nanobiosensor exhibits high selectivity, acceptance reproducibility, and good recovery performances.