Direct In-Mold Impregnation of Glass Fiber Fabric by Polypropylene with Supercritical Nitrogen in Microcellular Injection Molding Process.

Combining microcellular injection molding and insert injection molding, an injection molding technique for glass fiber fabric (GFF) reinforced polypropylene (PP) composite foams was proposed. The GFF was directly set in the mold cavity, and then the PP with supercritical nitrogen (SCN) was injected into the cavity for in-mold impregnation. The impregnation effects of two types of GFFs (EWR300 and EWR600) by the PP/SCF solutions at different injection temperatures (230, 240, and 250 °C) were investigated. The results of the morphological and tensile properties of the samples showed that the interfacial bonding was not good, because of the heterogeneity between the GFF and PP. In comparison with solid PP, the unfoamed GFF/PP did not present a higher tensile strength and presented a lower specific tensile strength. However, the increased tensile strength of the GFF/PP composite foams indicated an improvement in the impregnation effect and interfacial bonding. The SCN decreased the viscosity, which benefited the direct in-mold impregnation of the GFF. Increasing the temperature can improve the interfacial bonding, but it also influenced the foaming and thus led to a decrease in the tensile strength. According to the temperature distribution, the samples from different positions in the mold cavity had different properties.

Enhancing Mixing and Thermal Management of Recycled Carbon Composite Systems by Torsion-Induced Phase-to-Phase Thermal and Molecular Mobility.

A novel torsion screw has been proposed to resolve the inadequate control of mass transfer and the thermal management of two component polymer blends and their carbon fiber composites. The novel torsional screw distinctly introduced radial flow in the torsion screw channel, which is a significant improvement over the flow pattern developed by the conventional screw. The heat transfer and mixing behavior of melt mixtures are enhanced by adapting screws with torsion elements compared with the traditional screw elements. Heat transfer efficacy in the polypropylene-polystyrene bi-phasic extrusion process improved with the increase in torsion element numbers. An increased number of newly designed torsional elements also improved the dispersion of minor phase in bi-phase polypropylene-polystyrene composition and their carbon fiber composites. The unique flow pattern induced by the torsion elements shows a synergistic effect on the melt-phase mass flow and the thermal flow field facilitating phase-to-phase thermal and molecular mobility and enhanced fiber orientation, crystallinity and mechanical properties of composite made from recycled carbon fiber/polypropylene. Microtomographs of recycled carbon fiber demonstrated the extraordinary ability of a torsion screw element to orient carbon fiber in both axial and radial directions.