Design and simulation of a high performance Ag3CuS2 jalpaite-based photodetector.

This work provides a comprehensive investigation by using simulations and performance analysis of a high performance and narrowband Ag3CuS2 photodetector (PD) that operates in the near-infrared (NIR) region and is built using WS2 and BaSi2 semiconductors. Across its operational wavelength range, a comprehensive assessment of the device's electrical and optical properties such as photocurrent, open-circuit voltage, quantum efficiency, responsivity and detectivity is methodically carried out. Furthermore, a thorough investigation has been conducted into the impact of many parameters, including width, carrier density and defects of various layers. Also, the intricate interactions between WS2/Ag3CuS2 and Ag3CuS2/BaSi2 interface properties of the photodetector are explored. The Ag3CuS2-based PD remarkably produces the best outcomes with an open-circuit voltage of 0.74 V, current of 43.79 mA/cm2, responsivity of 0.79 AW-1 and detectivity of 4.73 × 1014 Jones and over 90 % QE in the NIR range for the Ag3CuS2 PD. The results showcase this jalpaite material as a promising one in the field of PD.

Design and optimization of a high efficiency CdTe-FeSi2 based double-junction two-terminal tandem solar cell.

This article theoretically demonstrates an enormously efficient CdTe-FeSi2 based dual-junction tandem solar cell accompanied by slender semiconductor layers. The peak efficiency of the device has been ensured through the optimization of its various attributes of window, CdTe (bandgap 1.5 eV) top absorber, FeSi2 (bandgap 0.87 eV) bottom absorber and back surface layers. Additionally, the impacts of thickness, doping and the level of defects in different window, base and rear surface layers have been examined to observe how different layers affect the solar cell's performance. The optimized n-CdS/p-CdTe/p+-MoS2--n-CdS/p-FeSi2/p+-Cu2SnS3 dual-junction tandem solar device displays an efficiency of 43.9% with a voltage at no load, VOC of 1.928 V, current density under a closed circuit, JSC of 25.34 mA/cm2, and fill factor of 89.88%, respectively. These results disclose the high potential of the suggested solar cell based on CdTe and FeSi2 compounds.