Generation of time-synchronized two-color X-ray free-electron laser pulses using phase shifters.

To optimize the intensity of X-ray free-electron lasers (XFELs), phase shifters, oriented in phase with the phases of the XFEL pulse and electron beam, are typically installed at undulator lines. Although a π-offset between the phases (i.e., an "out-of-phase" configuration) can suppress the XFEL intensity at resonant frequencies, it can also generate a side-band spectrum, which results in a two-color XFEL pulse; the dynamics of such a pulse can be described using the spontaneous radiation or low gain theory. This attributes of this two-color XFEL pulse can be amplified (log-scale amplification) through an undulator line with out-of-phase phase shifters. In this study, the features of two-color XFEL pulses were evaluated through theory, simulations and experiments performed at Pohang Accelerator Laboratory X-ray Free Electron Laser. The XFEL gain slope and energy separation between the two-color spectral peaks were consistent through theoretical expectation, and the results of simulation and experiment. The experimentally determined two-color XFEL pulse energy was 250 µJ at a photon energy of 12.38 keV with a separation of 60 eV.

Statistical analysis of hard X-ray radiation at the PAL-XFEL facility performed by Hanbury Brown and Twiss interferometry.

A Hanbury Brown and Twiss interferometry experiment based on second-order correlations was performed at the PAL-XFEL facility. The statistical properties of the X-ray radiation were studied within this experiment. Measurements were performed at the NCI beamline at 10 keV photon energy under various operation conditions: self-amplified spontaneous emission (SASE), SASE with a monochromator, and self-seeding regimes at 120 pC, 180 pC and 200 pC electron bunch charge. Statistical analysis showed short average pulse duration from 6 fs to 9 fs depending on the operational conditions. A high spatial degree of coherence of about 70-80% was determined in the spatial domain for the SASE beams with the monochromator and self-seeding regime of operation. The obtained values describe the statistical properties of the beams generated at the PAL-XFEL facility.

Effect of high slice energy spread of an electron beam on the generation of isolated, terawatt, attosecond X-ray free-electron laser pulse.

Attosecond (asec) X-ray free-electron laser (XFEL) has attracted considerable interest over the past years. Nowadays typical XFEL application experiments demand 1010-1011 photons per pulse, which corresponds to a peak power of terawatts (TW) in case of asec hard X-ray pulse. To the realization of such TW asec-XFEL pulse, however, the unavoidable increase of slice energy spread (SES) due to laser heater, which is commonly used to mitigate the micro-bunching instability (MBI), would be a major obstacle. To deal with this problem, the effect of such a SES is investigated in this work. The results reveal that (1) SES of a current spike is linearly proportional to the peak current of a current spike in an electron beam, (2) surprisingly, this linearity is independent of the wavelength of an energy modulation driving laser which is used to make a current spike and (3) the gain length of current spike in the undulator is sensitive to the initial SES, so there is an optimal peak current of the current spike for successful FEL lasing process. Utilizing these characteristics, a series of simulations with parameters for Pohang Accelerator Laboratory X-ray Free Electron Laser was carried out to demonstrate that an isolated, TW asec-XFEL pulse can be generated even when the SES is increased due to the usage of laser heater to prevent the MBI in the XFEL. We show that an isolated X-ray pulse with >1 TW and a pulse duration of 73 as (~3 × 1010 photons/pulse at 12.4 keV or 0.1 nm) can be generated by using ten current spikes with optimal peak current. It becomes clear for the first time that the disadvantage from the increased SES can be indeed overcome.

Hard X-ray self-seeding commissioning at PAL-XFEL.

A wake monochromator based on a large-area diamond single crystal for hard X-ray self-seeding has been successfully installed and commissioned in the hard X-ray free-electron laser (FEL) at the Pohang Accelerator Laboratory with international collaboration. For this commissioning, the self-seeding was demonstrated with a low bunch charge (40 pC) and the nominal bunch charge (180 pC) of self-amplified spontaneous emission (SASE) operation. The FEL pulse lengths were estimated as 7 fs and 29.5 fs, respectively. In both cases, the average spectral brightness increased by more than three times compared with the SASE mode. The self-seeding experiment was demonstrated for the first time using a crystal with a thickness of 30 µm, and a narrow bandwidth of 0.22 eV (full width at half-maximum) was obtained at 8.3 keV, which confirmed the functionality of a crystal with such a small thickness. In the nominal bunch-charge self-seeding experiment, the histogram of the intensity integrated over a 1 eV bandwidth showed a well defined Gaussian profile, which is evidence of the saturated FEL and a minimal electron-energy jitter (∼1.2 × 10-4) effect. The corresponding low photon-energy jitter (∼2.4 × 10-4) of the SASE FEL pulse, which is two times lower than the Pierce parameter, enabled the seeding power to be maximized by maintaining the spectral overlap between SASE FEL gain and the monochromator.

Author Correction: Isolated terawatt attosecond hard X-ray pulse generated from single current spike.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.

Isolated terawatt attosecond hard X-ray pulse generated from single current spike.

Isolated terawatt (TW) attosecond (as) hard X-ray pulse is greatly desired for four-dimensional investigations of natural phenomena with picometer spatial and attosecond temporal resolutions. Since the demand for such sources is continuously increasing, the possibility of generating such pulse by a single current spike without the use of optical or electron delay units in an undulator line is addressed. The conditions of a current spike (width and height) and a modulation laser pulse (wavelength and power) is also discussed. We demonstrate that an isolated TW-level as a hard X-ray can be produced by a properly chosen single current spike in an electron bunch with simulation results. By using realistic specifications of an electron bunch of the Pohang Accelerator Laboratory X-ray Free-Electron Laser (PAL-XFEL), we show that an isolated, >1.0 TW and ~36 as X-ray pulse at 12.4 keV can be generated in an optimized-tapered undulator line. This result opens a new vista for current XFEL operation: the attosecond XFEL.

Using irregularly spaced current peaks to generate an isolated attosecond X-ray pulse in free-electron lasers.

A method is proposed to generate an isolated attosecond X-ray pulse in free-electron lasers, using irregularly spaced current peaks induced in an electron beam through interaction with an intense short-pulse optical laser. In comparison with a similar scheme proposed in a previous paper, the irregular arrangement of current peaks significantly improves the contrast between the main and satellite pulses, enhances the attainable peak power and simplifies the accelerator layout. Three different methods are proposed for this purpose and achievable performances are computed under realistic conditions. Numerical simulations carried out with the best configuration show that an isolated 7.7 keV X-ray pulse with a peak power of 1.7 TW and pulse length of 70 as can be generated. In this particular example, the contrast is improved by two orders of magnitude and the peak power is enhanced by a factor of three, when compared with the previous scheme.