Solution Processable, Flexible, and Transparent Hybrid Electrodes Using Tungsten Oxide Buffer Layer on Silver Nanowires.

In this study, we fabricate solution processable, flexible, and transparent hybrid electrodes. The hybrid electrodes are designed by depositing a tungsten trioxide (WO3) buffer layer on silver nanowires. The fabrication method is solution based, and the electrodes can be fabricated directly on a flexible substrate at low temperatures. This fabrication method is cost-effective and scalable. The hybrid electrodes show high flexibility, transparency, and conductivity. In addition, since the thickness of the WO3 buffer layer can be controlled, the transparency, conductivity, and surface roughness of the hybrid electrodes can be tailored. These hybrid electrodes are potential alternatives to conventional indium tin oxide electrodes for flexible electronic devices.

Enhanced light extraction from organic light-emitting diodes using a quasi-periodic nano-structure.

Organic light-emitting diodes with a quasi-periodic nano-structure (QPS) were fabricated via a combination of laser interference lithography (LIL) and reactive ion etching (RIE). The LIL process was used to generate a periodic pattern, whereas the RIE process was used as a supplement to add randomness to the periodic pattern. The period of the fabricated periodic pattern was determined by finite difference time domain solutions. The height and density of the QPS were controlled by the RIE etching time and were optimized. The resulting quasi-periodic nanostructure comprised silicon dioxide (SiO2) with a low refractive index (n = 1.4-1.5), and an external quantum efficiency enhancement of 18% was achieved using the QPS device, without any viewing angle problems or spectral distortion, which are serious drawbacks of periodic patterns.

Nano-arrayed OLEDs: enhanced outcoupling efficiency and suppressed efficiency roll-off.

Organic light-emitting diodes (OLEDs) with an enhanced outcoupling efficiency and a suppressed efficiency roll-off were fabricated by inserting a nanosize pixel-defining layer (nPDL) that defines the OLED emission region as an array of nanoholes. The outcoupling efficiency of the nano-arrayed OLEDs was increased through the reduced surface plasmon polariton loss caused by the wavy diffraction grating at the metal-organic interface, and their efficiency roll-off was suppressed through the diffusive exciton outside the exciton-formation zone. As a result, the nano-arrayed OLEDs exhibited enhancements of 148.7% in the power efficiency and 137.0% in the external quantum efficiency at 1000 cd m-2 compared with a reference device. Furthermore, the critical current density (J0) where the external quantum efficiency decreased to half of its initial value was improved by a factor of 2.5.

Junction-Free Electrospun Ag Fiber Electrodes for Flexible Organic Light-Emitting Diodes.

Fabrication of junction-free Ag fiber electrodes for flexible organic light-emitting diodes (OLEDs) is demonstrated. The junction-free Ag fiber electrodes are fabricated by electrospun polymer fibers used as an etch mask and wet etching of Ag thin film. This process facilitates surface roughness control, which is important in transparent electrodes based on metal wires to prevent electrical instability of the OLEDs. The transmittance and resistance of Ag fiber electrodes can be independently adjusted by controlling spinning time and Ag deposition thickness. The Ag fiber electrode shows a transmittance of 91.8% (at 550 nm) at a sheet resistance of 22.3 Ω â–¡-1 , leading to the highest OLED efficiency. In addition, Ag fiber electrodes exhibit excellent mechanical durability, as shown by measuring the change in resistance under repeatable mechanical bending and various bending radii. The OLEDs with Ag fiber electrodes on a flexible substrate are successfully fabricated, and the OLEDs show an enhancement of EQE (≈19%) compared to commercial indium tin oxide electrodes.

Spectral-distortion-free light extraction from organic light-emitting diodes using nanoscale photonic crystal.

Despite their generally good performance, photonic crystal (PC)-based organic light-emitting diodes (OLEDs) encounter a serious spectral distortion problem. In this study, we obtained spectral-distortion-free PC-based OLEDs by lowering the pitch (period of the PC) to less than a half the emission wavelength, using a simple and scalable nanoscale process of laser interference lithography. The demonstrated OLEDs with 200 nm pitch-size nanoscale periodic hole arrays exhibited negligible changes in the Internal Commission on Illumination 1931 color coordinate of Δ (0.0104, 0.0078) and a peak wavelength of Δ0 nm (relative to the reference), while maintaining the function of the internal light extraction layer, manifested as a 23% enhancement of the external quantum efficiency (EQE). The enhancement of the EQE reached 85% after incorporating a micro-lens array. The improved light extraction, spectral-distortion-free characteristic, and excellent color stability over a broad range of viewing angles were successfully derived by performing finite difference time domain simulations.

Silver Nanowire-IZO-Conducting Polymer Hybrids for Flexible and Transparent Conductive Electrodes for Organic Light-Emitting Diodes.

Solution-processed silver nanowire (AgNW) has been considered as a promising material for next-generation flexible transparent conductive electrodes. However, despite the advantages of AgNWs, some of their intrinsic drawbacks, such as large surface roughness and poor interconnection between wires, limit their practical application in organic light-emitting diodes (OLEDs). Herein, we report a high-performance AgNW-based hybrid electrode composed of indium-doped zinc oxide (IZO) and poly (3,4-ethylenediowythiophene):poly(styrenesulfonate) [PEDOT:PSS]. The IZO layer protects the underlying AgNWs from oxidation and corrosion and tightly fuses the wires together and to the substrate. The PEDOT:PSS effectively reduces surface roughness and increases the hybrid films' transmittance. The fabricated electrodes exhibited a low sheet resistance of 5.9 Ωsq-1 with high transmittance of 86% at 550 nm. The optical, electrical, and mechanical properties of the AgNW-based hybrid films were investigated in detail to determine the structure-property relations, and whether optical or electrical properties could be controlled with variation in each layer's thickness to satisfy different requirements for different applications. Flexible OLEDs (f-OLEDs) were successfully fabricated on the hybrid electrodes to prove their applicability; their performance was even better than those on commercial indium doped tin oxide (ITO) electrodes.

An extremely low-index photonic crystal layer for enhanced light extraction from organic light-emitting diodes.

This paper reports organic light-emitting diodes (OLEDs) with improved light extraction fabricated by embedding an extremely low-index photonic crystal (LIPC) layer. The LIPC layer increases the optical efficiency through the reduced wave-guide mode between the substrate and anode both by increased light resonance and by a strengthened diffraction effect from an extremely low-refractive-index medium, specifically a line structure composed of a vacuum gap. As a result, the current efficiency and power efficiency of the LIPC-OLEDs are 1.51 and 1.93 times higher, respectively, than the reference device at 1000 cd m(-2). Because most of the light extraction is significant, especially in the forward direction, at the specific wavelengths satisfying the Bragg's diffraction equation, it is possible to calculate the anomalous spectrum of the LIPC-OLED through the finite-difference time domain (FDTD) method.

High-performance hybrid buffer layer using 1,4,5,8,9,11-hexaazatriphenylenehexacarbonitrile/molybdenum oxide in inverted top-emitting organic light-emitting diodes.

A high-performance 1,4,5,8,9,11-hexaazatriphenylenehexacarbonitrile (HATCN)/molybdenum oxide (MoO3) hybrid buffer layer with high hole-injection efficiency and superior plasma resistance under the sputtering process was developed. The HATCN enhances the hole-injection efficiency, and the MoO3 effectively protects the underlying organic layers from plasma damage during deposition by sputtering. This improves the characteristics of inverted top-emitting organic light-emitting diodes using a top transparent conductive oxide electrode. The device using the hybrid buffer layer showed the highest electroluminescence characteristics among devices with other buffer layers. The high hole-injection efficiency of HATCN was shown by the J-F curve of hole-only devices, and the plasma protection performance of MoO3 was shown by atomic force microscope surface morphology images of the buffer layer film after O2 plasma treatment.

Enhanced light out-coupling efficiency of organic light-emitting diodes with an extremely low haze by plasma treated nanoscale corrugation.

Extremely low-haze light extraction from organic light-emitting diodes (OLEDs) was achieved by utilizing nanoscale corrugation, which was simply fabricated with plasma treatment and sonication. The haze of the nanoscale corrugation for light extraction (NCLE) corresponds to 0.21% for visible wavelengths, which is comparable to that of bare glass. The OLEDs with NCLE showed enhancements of 34.19% in current efficiency and 35.75% in power efficiency. Furthermore, the OLEDs with NCLE exhibited angle-stable electroluminescence (EL) spectra for different viewing angles, with no change in the full width at half maximum (FWHM) and peak wavelength. The flexibility of the polymer used for the NCLE and plasma treatment process indicates that the NCLE can be applied to large and flexible OLED displays.

Novel composite layer based on electrospun polymer nanofibers for efficient light scattering.

We fabricated a PAN (polyacrylonitrile) NF (nanofiber)-embedded composite layer to adjust the light-control layer in light-emitting-diode (LED) and organic-light-emitting-diode (OLED) lighting systems with unique optical characteristics, for effective light scattering. The newly designed light-control composite layers with a composition of PAN NF/SU-8 exhibited a change in the optical properties, which was identified by the diameter control of the NF using a simple process. The change in the optical properties was largely dependent on the embedded NF's features. Therefore, the NF can be applied in different types of lighting systems, depending on each lighting device's purpose.

Effective indium-doped zinc oxide buffer layer on silver nanowires for electrically highly stable, flexible, transparent, and conductive composite electrodes.

We demonstrate a flexible, transparent, and conductive composite electrode comprising silver nanowires (Ag NWs), and indium-doped zinc oxide (IZO) layers. IZO is sputtered onto an Ag NW layer, with the unique structural features of the resulting composite suitable as a flexible, transparent, conductive electrode. The IZO buffer layer prohibits surface oxidation of the Ag NW, and is thereby effective in preventing undesirable changes in electrical properties. The newly designed composite electrode is a promising alternative to conventional ITO films for the production of flexible and transparent electrodes to be applied in next-generation flexible electronic devices.