Waste-Wood-Isolated Cellulose-Based Activated Carbon Paper Electrodes with Graphene Nanoplatelets for Flexible Supercapacitors.

Waste wood, which has a large amount of cellulose fibers, should be transformed into useful materials for addressing environmental and resource problems. Thus, this study analyzed the application of waste wood as supercapacitor electrode material. First, cellulose fibers were extracted from waste wood and mixed with different contents of graphene nanoplatelets (GnPs) in water. Using a facile filtration method, cellulose papers with GnPs were prepared and converted into carbon papers through carbonization and then to porous activated carbon papers containing GnPs (ACP-GnP) through chemical activation processes. For the morphology of ACP-GnP, activated carbon fibers with abundant pores were formed. The increase in the amount of GnPs attached to the fiber surfaces decreased the number of pores. The Brunauer-Emmett-Teller surface areas and specific capacitance of the ACP-GnP electrodes decreased with an increase in the GnP content. However, the galvanostatic charge-discharge curves of ACPs with higher GnP contents gradually changed into triangular and linear shapes, which are associated with the capacitive performance. For example, ACP with 15 wt% GnP had a low mass transfer resistance and high charge delivery of ions, resulting in the specific capacitance value of 267 Fg-1 owing to micropore and mesopore formation during the activation of carbon paper.

Cell-penetrating TLR inhibitor peptide alleviates ulcerative colitis by the functional modulation of macrophages.

Toll-like receptors (TLRs) have a crucial role not only in triggering innate responses against microbes but in orchestrating an appropriate adaptive immunity. However, deregulated activation of TLR signaling leads to chronic inflammatory conditions such as inflammatory bowel disease (IBD). In this study, we evaluated the immunomodulatory potential of a TLR inhibitor in the form of a cell-penetrating peptide using an ulcerative colitis animal model. A peptide derived from the TIR domain of the TLR adaptor molecule TIRAP that was conjugated with a cell-penetrating sequence (cpTLR-i) suppressed the induction of pro-inflammatory cytokines such as TNF-α and IL-1ß in macrophages. In DSS-induced colitis mice, cpTLR-i treatment ameliorated colitis symptoms, colonic tissue damage, and mucosal inflammation. Intriguingly, cpTLR-i attenuated the induction of TNF-α-expressing proinflammatory macrophages while promoting that of regulatory macrophages expressing arginase-1 and reduced type 17 helper T cell (Th17) responses in the inflamed colonic lamina propria. An in vitro study validated that cpTLR-i enhanced the differentiation of monocyte-driven macrophages into mature macrophages with a regulatory phenotype in a microbial TLR ligand-independent manner. Furthermore, the cocultivation of CD4 T cells with macrophages revealed that cpTLR-i suppressed the activation of Th17 cells through the functional modulation of macrophages. Taken together, our data show the immunomodulatory potential of the TLR inhibitor peptide and suggest cpTLR-i as a novel therapeutic candidate for the treatment of IBD.

Differential Expression of Pax6 Following Bilateral Common Carotid Artery Occlusion.

BACKGROUND/AIM: Chronic cerebral hypoperfusion causes neuronal damage involving cognitive impairment and development of dementia. Permanent bilateral common carotid artery occlusion (BCCAO) in rat models is used to study chronic cerebral hypoperfusion. Pax6 is used as an early neurogenesis marker which affects the maturation of neuronal cells. However, the expression of PAX 6 after BCCAO is not well understood. In this study, we investigated the expression of PAX6 in the neurogenic zones after BCCAO to evaluate the effects of Pax6 on chronic hypoperfusion. MATERIALS AND METHODS: Chronic hypoperfusion was induced by BCCAO. Common carotid artery was laid parallel to the vagus nerve and separated from it. Both arteries were occluded using 4-0 silk sutures. Rats who underwent bi-common carotid artery occlusion formed in the BCCAO group, while unoperated rats served as the control group. Brain samples were obtained on days 3 and 14 after BCCAO and subjected to immunohisto-chemistry with NeuN and western blotting for Pax6 and HIF1α. RESULTS: Compared to the control, the expression of Pax6 increased three days after surgery but did not differ on day 14, while that of NeuN showed the opposite trend. The expression of HIF1α increased three days after surgery. CONCLUSION: Bilateral common carotid artery occlusion induced early neurogenesis at three days after BCCAO but this result was not maintained at fourteen days after BCCAO.

Electromagnetic-Interference-Shielding Effectiveness of Lyocell-Based Carbon Fabrics Carbonized at Various Temperatures.

Lyocell is a biodegradable filament yarn obtained by directly dissolving cellulose in a mixture of N-methylmorpholine-N-oxide and a non-toxic solvent. Therefore, herein, lyocell fabrics were employed as eco-friendly carbon-precursor substitutes for use as electromagnetic interference (EMI) shielding materials. First, a lyocell fabric treated with polyacrylamide via electron beam irradiation reported in a previous study to increase carbon yields and tensile strengths was carbonized by heating to 900, 1100, and 1300 °C. The carbonization transformed the fabric into a graphitic crystalline structure, and its electrical conductivity and EMI shielding effectiveness (SE) were enhanced despite the absence of metals. For a single sheet, the electrical conductivities of the lyocell-based carbon fabric samples at the different carbonization temperatures were 3.57, 5.96, and 8.91 S m-1, leading to an EMI SE of approximately 18, 35, and 82 dB at 1.5-3.0 GHz, respectively. For three sheets of fabric carbonized at 1300 °C, the electrical conductivity was 10.80 S m-1, resulting in an excellent EMI SE of approximately 105 dB. Generally, EM radiation is reduced by 99.9999% in instances when the EMI SE was over 60 dB. The EMI SE of the three lyocell-based carbon fabric sheets obtained at 1100 °C and that of all the sheets of the sample obtained at 1300 °C exceeded approximately 60 dB.

Carbon Papers from Tall Goldenrod Cellulose Fibers and Carbon Nanotubes for Application as Electromagnetic Interference Shielding Materials.

To transform tall goldenrods, which are invasive alien plant that destroy the ecosystem of South Korea, into useful materials, cellulose fibers isolated from tall goldenrods are applied as EMI shielding materials in this study. The obtained cellulose fibers were blended with CNTs, which were used as additives, to improve the electrical conductivity. TGCF/CNT papers prepared using a facile paper manufacturing process with various weight percent ratios and thickness were carbonized at high temperatures and investigated as EMI shielding materials. The increase in the carbonization temperature, thickness, and CNT content enhanced the electrical conductivity and EMI SE of TGCF/CNT carbon papers. TGCF/CNT-15 papers, with approximately 4.5 mm of thickness, carbonized at 1300 °C exhibited the highest electrical conductivity of 6.35 S cm-1, indicating an EMI SE of approximately 62 dB at 1.6 GHz of the low frequency band. Additionally, the obtained TGCF/CNT carbon papers were flexible and could be bent and wound without breaking.

Fabrication and Characterization of Waste Wood Cellulose Fiber/Graphene Nanoplatelet Carbon Papers for Application as Electromagnetic Interference Shielding Materials.

Waste wood contains large amounts of cellulose fibers that have outstanding mechanical properties. These fibers can be recycled and converted into highly valuable materials of waste wood. In this study, waste wood cellulose fiber/graphene nanoplatelet (WWCF/GnP) papers were prepared according to the WWCF and GnP contents. Subsequently, the WWCF/GnP papers were varyingly carbonized for their application as electromagnetic interference (EMI) shielding materials such as state-of-the-art electronic equipment malfunction prevention, chip-level microsystem, and micro intersystem noise suppression/reduction. The increase in the GnP content and carbonization temperature enhanced electrical conductivity, thereby generating a greater EMI shielding effectiveness (EMI SE) in the high-frequency X-band. Additionally, the thickness of the WWCF/GnP carbon papers improved the electrical conductivity and EMI SE values. The electrical conductivity of the WWCF/GnP-15 carbon paper obtained at carbonization temperature of 1300 °C was approximately 5.86 S/m, leading to an EMI SE value of 43 decibels (dB) at 10.5 GHz for one sheet. Furthermore, overlapping of the three sheets increased the electrical conductivity to 7.02 S/m, leading to an EMI SE value of 72.5 dB at 10.5 GHz. Thus, we isolated WWCFs, without completely removing contaminants, for recycling and converting them into highly valuable EMI shielding materials.

Differential Expression of BDNF and BIM in Streptozotocin-induced Diabetic Rat Retina After Fluoxetine Injection.

BACKGROUND: Chronic diabetic retinopathy (DR) is a diabetic complication that causes blindness. Brain-derived neurotrophic factor (BDNF) expression is induced by fluoxetine. We observed the effects of fluoxetine on a streptozotocin (STZ)-induced diabetic rat model in this study. MATERIALS AND METHODS: Rats were divided into three groups: Control, diabetic (65 mg/kg STZ injection), and diabetic with fluoxetine injection (20 mg/kg/week, six times). Western blotting was performed using anti-BDNF and anti-hexaribonucleotide-binding protein-3. Expression of BCL2 apoptosis regulator-like protein 11 (BIM) was analysed using a reverse transcription-polymerase chain reaction. RESULTS: BDNF levels were significantly higher in the diabetic group treated with fluoxetine than in the untreated diabetic group. BIM expression was higher in the diabetic group than in the control group. BIM gene expression was lower in fluoxetine-treated diabetic group than in the untreated diabetic group. CONCLUSION: Fluoxetine had an anti-apoptotic effect with upregulation of BDNF expression in retina of rats with STZ-induced diabetes.

Preparation and Characterization of Carbon Fibers from Lyocell Precursors Grafted with Polyacrylamide via Electron-Beam Irradiation.

Carbon fibers, which act as reinforcements in many applications, are often obtained from polyacrylonitrile (PAN). However, their production is expensive and results in waste problems. Therefore, we focused on producing carbon fibers from lyocell, a cellulose-based material, and analyzed the effects of the process parameters on their mechanical properties and carbon yields. Lyocell was initially grafted with polyacrylamide (PAM) via electron-beam irradiation (EBI) and was subsequently stabilized and carbonized. Thermal analysis showed that PAM grafting increased the carbon yields to 20% at 1000 °C when compared to that of raw lyocell, which degraded completely at about 600 °C. Stabilization further increased this yield to 55%. The morphology of the produced carbon fibers was highly dependent on PAM concentration, with fibers obtained at concentrations ≤0.5 wt.% exhibiting clear, rigid, and round cross-sections with smooth surfaces, whereas fibers obtained from 2 and 4 wt.% showed peeling surfaces and attachment between individual fibers due to high viscosity of PAM. These features affected the mechanical properties of the fibers. In this study, carbon fibers of the highest tensile strength (1.39 GPa) were produced with 0.5 wt.% PAM, thereby establishing the feasibility of using EBI-induced PAM grafting on lyocell fabrics to produce high-performance carbon fibers with good yields.

IGF-1 Protects Neurons in the Cortex and Subventricular Zone in a Periventricular Leucomalacia Model.

BACKGROUND/AIM: Chronic cerebral hypoperfusion affects early and mature neurons in the subventricular zone (SVZ) and cerebral cortex. Herein, we investigated the effects of insulin-like growth factor-1 (IGF-1), a neurogenesis-promoting agent, on neurons in these regions in periventricular leucomalacia (PVL) model rats. MATERIALS AND METHODS: Following right carotid artery ligation, the rats were placed in a hypoxia chamber and injected with recombinant IGF-1 (0.1 and 1 µg/µl). Their brain sections were immunohistochemically analysed using anti-nestin and anti-NeuN antibodies. RESULTS: The numbers of early-neuronal cells in the SVZ and mature neurons in the cerebral cortex were higher and lower, respectively, in the PVL group than in the control group. The number of NeuN-positive cells was significantly higher in the IGF-treated group than in the PVL group. CONCLUSION: PVL increased the number of early neuronal cells in the SVZ, reducing the survival of mature neurons in the cerebral cortex; IGF-1 reversed these effects.

Characterization of Activated Carbon Paper Electrodes Prepared by Rice Husk-Isolated Cellulose Fibers for Supercapacitor Applications.

For the preparation of activated carbon papers (APCs) as supercapacitor electrodes, impurity substances were removed from rice husks, before carbonization and various activation temperature treatments, to optimize electro chemical efficiency. The porosities and electrochemical performances of the ACPs depended strongly on activation temperature: The specific surface area increased from 202.92 (500 °C) to 2158.48 m2 g-1 (1100 °C). XRD and Raman analyses revealed that ACP graphitization also increased with the activation temperature. For activation at 1100 °C, the maximum specific capacitance was 255 F g-1, and over 92% of its capacitance was retained after 2000 cycles.

Role of Phase Change Materials Containing Carbonized Rice husks on the Roof-Surface and Indoor Temperatures for Cool Roof System Application.

This study researches the effect of phase change materials (PCMs) containing carbonized rice husks (CRHs) in wood plastic composites (WPCs) as roof finishing materials on roof-surface and indoor temperatures. A cool roof miniature model was prepared, and measurements were taken using three fixed temperatures of 30 to 32 °C, 35 to 37 °C, and 40 to 42 °C. Sodium sulfate decahydrate (Na2SO4·10H2O) and paraffin wax were selected as the PCMs. CRHs were used as additives to improve the thermal conductivities of the PCMs. At lower fixed temperatures such as 30 to 32 °C and 35 to 37 °C, the rates of increase of the surface temperatures of roofs containing CRHs with Na2SO4·10H2O, and paraffin wax, were observed to gradually decrease compared to those of the roofs without PCMs. The indoor temperatures for the above-mentioned PCMs containing CRHs were maintained to be lower than those of the indoors without PCMs. Additionally, as the CRH content in the PCM increased, the rates of increase of the roof-surface and indoor temperatures decreased due to a faster roof heat absorption by PCMs through the improved thermal conductivity of CRHs. However, under higher artificial temperatures such as 40 to 42 °C, Na2SO4·10H2O with CRHs exhibited no effect due to being out of latent heat range of Na2SO4·H2O. For paraffin wax, as CRH content increased, their roof- surface and indoor temperatures decreased. Especially, the surface temperature of the roof containing paraffin contained 5 wt.% CRHs reduced by 11 °C, and its indoor temperature dropped to 26.4 °C. The thermal conductivity of PCM was enhanced by the addition of CRHs. A suitable PCM selection in each location can result in the reduction of the roof-surface and indoor temperatures.

Differential Expression of Vascular Endothelial Growth Factor in the Cortex and Hippocampus upon Cerebral Hypoperfusion.

BACKGROUND/AIM: Vascular endothelial growth factor (VEGF) provides tolerance against ischemic brain injury, yet, the pattern of VEGF expression in the neurogenic zones following chronic cerebral hypoperfusion has not been studied. Here we evaluated the immunoreactivity of VEGF in a rat model of chronic cerebral hypoperfusion. MATERIALS AND METHODS: Chronic hypoperfusion was induced by bilateral common carotid artery ligation in rats. Immunohistochemistry was performed against hypoxia-inducible factor-1α (HIF-1α) and VEGF on brain sections. RESULTS: The density of HIF1α-positive cells in the hypoxia group was increased in the cerebral cortex and hippocampus. Further, the density of VEGF-positive cells was significantly higher in the hypoxia group compared to the control group in the cerebral cortex whereas it was similar in the subventricular zone, and in the dentate gyrus in the hippocampus between the two groups. CONCLUSION: The pattern of VEGF expression varies in different brain regions following chronic cerebral hypoperfusion.

Electron Beam Irradiation Isolates Cellulose Nanofiber from Korea "Tall Goldenrod" Invasive Alien Plant Pulp.

This work investigates the possibility of isolating cellulose nanofibers from pulps of tall goldenrod plant, which are invasive plants in Korea, by a convenient method, without strong acids or high-pressure homogenization, using electron beam irradiation (EBI). The obtained cellulose nanofibers were characterized by scanning electron microscopy (SEM), ultraviolet-visible (UV-vis) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), and in terms of their mechanical properties. SEM showed that the initially isolated 10-µm-diameter cellulose fibers became more finely separated with increasing EBI dose, and that cellulose fibers treated with 300 kGy of EBI were separated into long cellulose nanofibers of around 160 nm in diameter. In addition, the paper samples prepared from more finely separated fibers generated by using higher doses of EBI had enhanced UV-vis transmittance. Via the XRD analysis, we observed that cellulose I in the EBI-treated cellulose fibers were gradually converted into a different type of cellulose similar to cellulose type II, as the EBI dose increased. Meanwhile, the TGA demonstrated that the finely separated cellulose fibers observed after administering the high EBI dose had lowered thermal stability due to the reduction of cellulose I but higher char yield. In addition, tensile strengths of paper samples increased with decreasing the diameters of their constituent fibers that result from the different EBI doses used in the preparation of the paper pulp.

Sound Absorption and Insulation Properties of a Polyurethane Foam Mixed with Electrospun Nylon-6 and Polyurethane Nanofibre Mats.

In recent years, noise has become a serious hazard and can have permanent biological and psychological effects on humans and other organisms in nature. Textile materials are commonly used as absorbent acoustic materials for noise reduction. This work examines the use of electrospun nylon-6 and polyurethane nanofibres (PU NFs) to improve the sound absorption and sound insulation properties of polyurethane foam. In this work, nylon-6 and polyurethane nanofibres were prepared by an electrospinning technique and were glued to a polyurethane foam. The sound absorption coefficient of the materials was measured by the impedance tube method. An impedance tube was used to measure the sound absorption and airborne sound insulation. The results showed decreased sound absorption properties, whereas the sound insulation was highly enhanced when polyurethane/nanofibre hybrids were used, as compared to the pristine polyurethane foam. Furthermore, the sound insulation properties of polyurethane foam were highly enhanced when the foam was combined with nylon-6 NFs, compared with the polyurethane foam with PU NFs. Therefore, by investigating the acoustic characteristics of electrospun nylon-6 and PU nanofibres, we believe that this study can broaden the application of electrospun nanofibres for sound pollution control.

Latent Heat Storage and Thermal Efficacy of Carboxymethyl Cellulose Carbon Foams Containing Ag, Al, Carbon Nanotubes, and Graphene in a Phase Change Material.

Carbon foam was prepared from carboxymethyl cellulose (CMC) and Ag, Al and carbon nanotubes (CNTs), and graphene was added to the foam individually, to investigate the enhancement effects on the thermal conductivity. In addition, we used the vacuum method to impregnate erythritol of the phase change material (PCM) into the carbon foam samples to maximize the latent heat and minimize the latent heat loss during thermal cycling. Carbon foams containing Ag (CF-Ag), Al (CF-Al), CNT (CF-CNT) and graphene (CF-G) showed higher thermal conductivity than the carbon foam without any nano thermal conducting materials (CF). From the variations in temperature with time, erythritol added to CF, CF-Ag, CF-Al, CF-CNT, and CF-G was observed to decrease the time required to reach the phase change temperature when compared with pure erythritol. Among them, erythritol added to CF-G had the fastest phase change temperature, and this was related to the fact that this material had the highest thermal conductivity of the carbon foams used in this study. According to differential scanning calorimetry (DSC) analyses, the materials in which erythritol was added (CF, CF-Ag, CF-Al, CF-CNT, and CF-G) showed lower latent heat values than pure erythritol, as a result of their supplementation with carbon foam. However, the latent heat loss of these supplemented materials was less than that of pure erythritol during thermal cycling tests because of capillary and surface tension forces.

Synthesis of Carbon Foam from Waste Artificial Marble Powder and Carboxymethyl Cellulose via Electron Beam Irradiation and Its Characterization.

Carbon foams were prepared by carbonization of carboxymethyl cellulose (CMC)/waste artificial marble powder (WAMP) composites obtained via electron beam irradiation (EBI); these composites were prepared by mixing eco-friendly CMC with WAMP as the fillers for improved their poor mechanical strength. Gel fractions of the CMC/WAMP composites obtained at various EBI doses were investigated, and it was found that the CMC/WAMP composites obtained at an EBI dose of 80 kGy showed the highest gel fraction (95%); hence, the composite prepared at this dose was selected for preparing the carbon foam. The thermogravimetric analysis of the CMC/WAMP composites obtained at 80 kGy; showed that the addition of WAMP increased the thermal stability and carbon residues of the CMC/WAMP composites at 900 °C. SEM images showed that the cell walls of the CMC/WAMP carbon foams were thicker more than those of the CMC carbon foam. In addition, energy dispersive X-ray spectroscopy showed that the CMC/WAMP carbon foams contained small amounts of aluminum, derived from WAMP. The results confirmed that the increased WAMP content and hence increased aluminum content improved the thermal conductivity of the composites and their corresponding carbon foams. Moreover, the addition of WAMP increased the compressive strength of CMC/WAMP composites and hence the strength of their corresponding carbon foams. In conclusion, this synthesis method is encouraging, as it produces carbon foams of pore structure with good mechanical properties and thermal conductivity.

Suppression of Akt-HIF-1α signaling axis by diacetyl atractylodiol inhibits hypoxia-induced angiogenesis.

Hypoxia-inducible factor (HIF)-1α is a key regulator associated with tumorigenesis, angiogenesis, and metastasis. HIF-1α regulation under hypoxia has been highlighted as a promising therapeutic target in angiogenesis-related diseases. Here, we demonstrate that diacetyl atractylodiol (DAA) from Atractylodes japonica (A. japonica) is a potent HIF-1α inhibitor that inhibits the Akt signaling pathway. DAA dose-dependently inhibited hypoxia-induced HIF-1α and downregulated Akt signaling without affecting the stability of HIF-1α protein. Furthermore, DAA prevented hypoxia-mediated angiogenesis based on in vitro tube formation and in vivo chorioallantoic membrane (CAM) assays. Therefore, DAA might be useful for treatment of hypoxia-related tumorigenesis, including angiogenesis. [BMB Reports 2016; 49(9): 508-513].

Effect of discarded keratin-based biocomposite hydrogels on the wound healing process in vivo.

Biocompatible keratin-based hydrogels prepared by electron beam irradiation (EBI) were examined in wound healing. As the EBI dose increased to 60 kGy, the tensile strength of the hydrogels increased, while the percentage of elongation of the hydrogels decreased. After 7 days, the dehydrated wool-based hydrogels show the highest mechanical properties (the % elongation of 1341 and the tensile strength of 6030 g/cm(2) at an EBI dose of 30 kGy). Excision wound models were used to evaluate the effects of human hair-based hydrogels and wool-based hydrogels on various phases of healing. On post-wounding days 7 and 14, wounds treated with either human hair-based or wool-based hydrogels were greatly reduced in size compared to wounds that received other treatments, although the hydrocolloid wound dressing-treated wound also showed a pronounced reduction in size compared to an open wound as measured by a histological assay. On the 14th postoperative day, the cellular appearances were similar in the hydrocolloid wound dressing and wool-based hydrogel-treated wounds, and collagen fibers were substituted with fibroblasts and mixed with fibroblasts in the dermis. Furthermore, the wound treated with a human hair-based hydrogel showed almost complete epithelial regeneration, with the maturation of immature connective tissue and hair follicles and formation of a sebaceous gland.

Inactivation of Src-to-ezrin pathway: a possible mechanism in the ouabain-mediated inhibition of A549 cell migration.

Ouabain, a cardiac glycoside found in plants, is primarily used in the treatment of congestive heart failure and arrhythmia because of its ability to inhibit Na(+)/K(+)-ATPase pump. Recently ouabain has been shown to exert anticancer effects but the underlying mechanism is not clear. Here, we explored the molecular mechanism by which ouabain exerts anticancer effects in human lung adenocarcinoma. Employing proteomic techniques, we found 7 proteins downregulated by ouabain in A549 including p-ezrin, a protein associated with pulmonary cancer metastasis in a dose-dependent manner. In addition, when the relative phosphorylation levels of 39 intracellular proteins were compared between control and ouabain-treated A549 cells, p-Src (Y416) was also found to be downregulated by ouabain. Furthermore, western blot revealed the ouabain-mediated downregulation of p-FAK (Y925), p-paxillin (Y118), p130CAS, and Na(+)/K(+)-ATPase subunits that have been shown to be involved in the migration of cancer cells. The inhibitory effect of ouabain and Src inhibitor PP2 on the migration of A549 cells was confirmed by Boyden chamber assay. Anticancer effects of ouabain in A549 cells appear to be related to its ability to regulate and inactivate Src-to-ezrin signaling, and proteins involved in focal adhesion such as Src, FAK, and p130CAS axis are proposed here.

Novel preparation and characterization of human hair-based nanofibers using electrospinning process.

Human hair-based biocomposite nanofibers (NFs) have been fabricated by an electrospinning technique. Aqueous keratin extracted from human hair was successfully blended with poly(vinyl alcohol) (PVA). The focus here is on transforming into keratin/PVA nanofibrous membranes and insoluble property of electrospun NFs. The resulting hair-based NFs were characterized using Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning colorimetry (DSC), and thermogravimetric analysis (TGA). Toward the potential use of these NFs after cross-linking with various weight fractions of glyoxal, its physicochemical properties, such as morphology, mechanical strength, crystallinity, and chemical structure were investigated. Keratin/PVA ratio of 2/1 NFs with 6 wt%-glyoxal showed good uniformity in fiber morphology and suitable mechanical properties, and excellent antibacterial activity providing a potential application of hair-based NFs in biomedical field.